Checkout should be the least stressful part of exam prep, and at CertkingdomPDF your 3605 purchase runs through protected Credit Card processing — your card details stay private, and customer interest comes before anything else.
Avaya 3605 Exam Overview:
Avaya 3605 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Topic 1: Redundancy and High Availability | - Link aggregation (LAG/MLAG concepts) - Device redundancy and failover mechanisms |
| Topic 2: Monitoring, Troubleshooting, and Maintenance | - Troubleshooting connectivity and performance issues - Log analysis and system diagnostics - Network monitoring and diagnostics tools |
| Topic 3: Layer 2 Switching Technologies | - VLAN configuration and trunking - MAC address learning and forwarding - Spanning Tree Protocol (STP/RSTP/MSTP) |
| Topic 4: Ethernet Routing Switch Fundamentals | - Switch operating system and management access methods - Avaya ERS architecture and models |
| Topic 5: Initial Configuration and Deployment | - Basic device setup and configuration parameters - Firmware upgrades and backup/restore procedures |
| Topic 6: Layer 3 Routing Features | - IP addressing and subnetting in switch environments - Static routing configuration - Inter-VLAN routing |
3605 Exam Questions Answered by CertkingdomPDF
- Layer 2 Switching Technologies ()
- Initial Configuration and Deployment ()
- Ethernet Routing Switch Fundamentals ()
Avaya Ethernet Routing Switch Implementation and Maintenance Sample Questions:
An Ethernet Routing Switch (ERS) 8600 for Virtual Router Redundancy Protocol (VRRP) is being configured. Which CU command would cause this switch to be the VRRP master?
- A. ERS860Q:5# config vlan 100 ip vrrp 100 master
- B. ERS8600:5# config vlan 100 ip vrrp 100 priority master
- C. ERS8600:5ff config vlan l00 ip vrrp 100 priority 1
- D. ERS8600:5# config vlan 100 ip vrrp 100 priority 250
Correct Answer: D 🗳️
Ethernet Routing Switch (ERS) 5500 portfolio shares a number of common hardware features. Which feature is unique to the ERS 5530 and is not available on the other ERS 5500 switches?
- A. User Interface push button
- B. Universal Serial Bus (USB) port
- C. Network management Ethernet port
- D. Console serial port
Correct Answer: B 🗳️
When configuring an Ethernet Routing Switch (ERS) 8000 redundant installation for warm standby, which protocol is used to give the fastest recalculation of a large layer 3 topology by the Standby CPU, after a Master CPU failure?
- A. RIP
- B. BGP
- C. OSPF
- D. STP
Correct Answer: C 🗳️
A call centre is using the stacks of Ethernet Routing Switches (ERS) 5520-48T- PWR to supply power over Ethernet (PoE) to their IP telephones. Each switch is attached to 48 telephones. The call centre begins operation at 9:00 am each day and they
verify that the
switch can supply
enough power to support each telephone drawing their maximum power for all switches simultaneously. They are using the IP Phone port 10/100 switch. Which statement it is true if all telephones are drawing 13.2 watts simultaneously?
- A. Each switch requires an RPSU 15 in addition to AC to supply full power to all ports.
- B. Each switch of supplying full port to all ports with only the AC input
- C. Each switch can supply full power to all ports while the AC is unavailable if attached to
- D. RPSU 15 can support four ERS 5520 switches that supply full power to all ports.
Correct Answer: A 🗳️
Which protocol can be used for end-to-end detection in a network as well as for point-to-point detection?
- A. LACP
- B. RSTP
- C. VLACP
- D. MSTP
Correct Answer: C 🗳️
Explanation: Only visible for CertkingdomPDF members. You can sign-up / login (it's free).
Viewing page 1 out of 35 pages.
Viewing questions 1-5 out of 173 questions.





