300-610 by Cisco Actual Free Exam Questions And Answers [UPDATED 2022]
300-610 Questions Truly Valid For Your Cisco Exam!
Cisco 300-610 Exam Certification Details:
| Recommended Training | Designing Cisco Data Center Infrastructure (DCID) |
| Exam Code | 300-610 DCID |
| Duration | 90 minutes |
| Number of Questions | 55-65 |
| Exam Price | $300 USD |
| Exam Name | Designing Cisco Data Center Infrastructure |
| Exam Registration | PEARSON VUE |
| Passing Score | Variable (750-850 / 1000 Approx.) |
NEW QUESTION 101
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 102
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 103
Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)
- A. VXLAN membership
- B. UUID assignment
- C. target server
- D. ARP entries
- E. number of vHBAs
Answer: B,E
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/ b_UCSM_CLI_Configuration_Guide_2_2/b_UCSM_CLI_Configuration_Guide_2_2_chapter_0100000.html
NEW QUESTION 104
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 105
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
- B. in the hardware on any Cisco UCS VIC adapter
- C. in the hardware on the Cisco UCS VIC 12xx adapter or later
- D. on the host, by using multipathing software
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION 106
A company needs a solution to virtualize their legacy desktop computers. The solution must be highly resilient and able to withstand the loss of a data center site.
Each compute node requires a minimum of 20 disk drives.
Which solution meets these requirements?
- A. *data center site with a strict security policy that provides access to users using a bespoke software client
*solution based on Cisco HX240 compute nodes - B. *thin client installed at each user's end station with a separate profile to retrieve sensitive data using the RDP protocol
*solution based on Cisco HX220 compute nodes - C. *virtual desktop infrastructure solution installed in multiple data centers that are close to the end users
*solution based on Cisco HX240 compute nodes - D. *dedicated virtual machine per hypervisors for each user in a centralized data center
*solution based on Cisco HX220 compute nodes
Answer: C
NEW QUESTION 107
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. type of storage
- B. N Port virtualization
- C. FCoE protocol
- D. end-to-end oversubscription ratio
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer- directors/white-paper-c11-729697.html
NEW QUESTION 108
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for external connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network.
Which two solutions must be used to meet these requirements? (Choose two.)
- A. DC Interconnect
- B. Distributed Anycast Gateway
- C. Spanning Tree Protocol
- D. VRF-Lite
- E. Inter-Site Network
Answer: A,B
NEW QUESTION 109
Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)
- A. IQN
- B. EUI
- C. WWPN
- D. OUI
- E. WWN
Answer: A,E
NEW QUESTION 110
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A. supports Layer 3 port channels
- B. disables spanning-tree
- C. uses all available uplink bandwidth
- D. maintains single control plane
- E. no spanning-tree blocked ports
Answer: C,E
NEW QUESTION 111
Refer to the exhibit.
A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other. Which Cisco ACI topology design meets these requirements?
- A. Multi-cloud
- B. Multi-pod over OSPF EVPN
- C. Multi-pod over MP-BGP EVPN
- D. Multi-site
Answer: D
Explanation:
Each data center has its own APIC cluster. This is multi-site setup.
NEW QUESTION 112
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
- A. IP redirects
- B. flow control
- C. HSRP
- D. proxy ARP
Answer: D
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX- OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
NEW QUESTION 113
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION 114
An engineer must deploy a Cisco HyperFlex system at two data centers. For redundancy reasons, the setup must achieve data protection in case of an entire site failure. The data must be available on both sites at all times to keep the recovery time objective to a minimum.
Which Cisco HyperFlex deployment model meets these requirements?
- A. edge with four nodes or more
- B. ROBO cluster
- C. standard with eight nodes
- D. stretched cluster
Answer: D
NEW QUESTION 115
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 116
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series Switches in a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server.
Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?
- A. LACP mode active
- B. PAgP mode desirable
- C. LACP mode auto
- D. PAgP mode auto
Answer: A
NEW QUESTION 117
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 118
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
- A. LLDP
- B. MCP
- C. BFD
- D. UDLD
Answer: D
Explanation:
Section: Network Design
NEW QUESTION 119
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. vPC
- B. physical port
- C. port channel
- D. virtual interface
Answer: D
NEW QUESTION 120
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. UDLD
- B. OSPF
- C. EVPN
- D. VPC+
Answer: C
Explanation:
Section: Network Design
NEW QUESTION 121
Which two methods mitigate congestion in a SAN network? (Choose two.)
- A. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
- B. Configure the port monitor to allow categorization of a specific device as slow.
- C. Use the port-monitor command to detect slow drain devices.
- D. Configure the flow control for the FC to use R_RDY.
- E. Configure the port channel to enable individual buffer-to-buffer credits.
Answer: B,C
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/interfaces/ cisco_mds9000_interfaces_config_guide_8x/congestion_avoidance_isolation.html
NEW QUESTION 122
An engineer is experiencing performance issues on a cisco UCS blade server. The B-series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic. Which policy must be used to alleviate these issues?
- A. vNIC placement
- B. Ethernet adapter
- C. LAN connectivity
- D. Dynamic vNIC connection
Answer: B
Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter19.html
Ethernet adapter policy is the only policy that is having configuration that is related to CPU.
NEW QUESTION 123
......
Get instant access of 100% real exam questions with verified answers: https://www.certkingdompdf.com/300-610-latest-certkingdom-dumps.html
300-610 Actual Questions - Instant Download Tests Free Updated Today!: https://drive.google.com/open?id=1I2PRwkZpqNc8daBzKHYkRSBSsNeXitmE