2024 Realistic 300-610 Dumps are Available for Instant Access
Download Exam 300-610 Practice Test Questions with 100% Verified Answers
Cisco 300-610 is an exam that is designed to test the knowledge and skills of individuals in designing the Cisco Data Center Infrastructure. 300-610 exam is part of the Cisco Certified Specialist - Data Center Core certification program. 300-610 exam focuses on various aspects of data center infrastructure design, including Cisco Unified Computing System (UCS), Cisco Application Centric Infrastructure (ACI), and Cisco HyperFlex.
Cisco 300-610 exam focuses on several key areas of data center design, including network design, compute design, storage design, automation, and security. Professionals who successfully pass 300-610 exam will have a deep understanding of these areas and will be able to design and deploy data center infrastructures that meet the needs of their organization. They will also be able to use advanced technologies like virtualization, software-defined networking, and automation to optimize their data center environments.
NEW QUESTION # 90
What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)
- A. Layer 3 failures do not propagate beyond the OTV edge device.
- B. It extends the spanning tree between data centers.
- C. It is an open standard.
- D. It constrains HSRP hello messages to each data center.
- E. It propagates hosts reachability without support of traffic flooding.
Answer: A,B
NEW QUESTION # 91
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco Data Center Network Manager
- B. Cisco Virtual Topology System
- C. Cisco Nexus Fabric Manager
- D. Cisco CloudCenter
Answer: A
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/DCNM_OLH/SAN_Client/fmhelp/ fmc.html#34479
NEW QUESTION # 92
An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-based load balancing, prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in the same VSAN. Which set of actions meets the requirements?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: D
NEW QUESTION # 93
A confidentially and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used. Which technology must be used to support these requirements?
- A. MACsec
- B. IPsec
- C. GRE
- D. OTV
Answer: A
Explanation:
The key to solution is "Ethernet frames". Frames are layer 2. IPsec encrypts at layer 3.
NEW QUESTION # 94
Which two configuration methods can be used to deploy QoS to Cisco MDS Series switches? (Choose two.)
- A. multiple QoS policies that match individual devices
- B. VSAN-based QoS
- C. multiple QoS policies that match multiple devices
- D. FCoE VLAN-based QoS
- E. zone-based QoS
Answer: B,E
NEW QUESTION # 95
A network engineer is designing a Cisco Hyperflex infrastructure. The infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.
Which storage connectivity method must be used to meet these requirements?
- A. Internet Small Computer Systems Interface
- B. raw device mapping
- C. Fibre Channel over Ethernet
- D. server message block
Answer: C
Explanation:
Reference:
HyperFlex_HX_DataPlatformSoftware/Network_External_Storage_Management_Guide/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0_chapter_010.html
NEW QUESTION # 96
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. vPC that has unified uplinks
- B. VSS that has unified uplinks
- C. Ethernet and unified ports on the same port channel
- D. cross-connections with pinning
Answer: A
Explanation:
Section: Storage Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11
NEW QUESTION # 97
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 98
An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP. Which solution should be included in the design?
- A. ingress replication
- B. head-end replication
- C. PIM sparse mode
- D. PIM dense mode
Answer: C
NEW QUESTION # 99
An engineer is implementing a storage area network where an NPV is used. The engineer notices that the servers in a storage farm are experiencing heavy traffic contention. The engineer needs to migrate traffic from heavily loaded server interfaces to interfaces with less load. When the new links are deployed, the existing traffic is not rebalanced as expected. Which feature must be used to meet these requirements?
- A. disruptive load balancing
- B. DVM
- C. multiple VSAN support
- D. NPIV
Answer: D
NEW QUESTION # 100
Refer to the exhibit.
What must be the default gateway of the servers in EPG Web?
- A. subnet address of BD1
- B. NAT appliance
- C. subnet address of L3Out
- D. subnet address of BD2
Answer: A
NEW QUESTION # 101
A customer needs a design for a new data center network that meets these requirements:
Logically partition the environment into separate security domains.
Cut costs related to purchasing additional equipment.
Separate routing processes, TCAM, QoS tables, and data planes.
Which technology must be used?
- A. VLAN
- B. vPC
- C. VDC
- D. VRF
Answer: C
NEW QUESTION # 102
An engineer must configure a new maintenance policy that will apply to multiple Cisco UCS domains The policy must be available for use by service profiles and service profile templates created and managed n either Cisco UCS Manager or Cisco UCS Central Changes to this policy must be allowed only in Cisco UCS Central Which policy type must the engineer select to accomplish these goals?
- A. central policy
- B. global pokey
- C. hybrid policy
- D. local policy
Answer: B
NEW QUESTION # 103
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION # 104
An engineer requires a solution that achieves Ethernet traffic forwarding on all available paths from the hosts to the Cisco Nexus Fabric Extender and from the Fabric Extenders to the Cisco Nexus 5000 Series Switches. The NIC teaming from the Fabric Extender to a server should use an LACP EtherChannel. Which solution should be implemented to meet these requirements?
- A. Virtual Port Channel
- B. Enhanced Virtual Port Channel
Answer: B
Explanation:
C. Virtual Port Channel Plus (vPC+) D. Back-to-Back Virtual Port Channel
NEW QUESTION # 105
An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches.
Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?
- A. dual vNICs with LACP link aggregation
- B. dual vNICs with hardware fabric failover on the fabric interconnects
- C. dual vNICs with MAC pinning link aggregation
- D. dual vNICs with static EtherChannel link aggregation
Answer: A
NEW QUESTION # 106
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 107
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC the member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations. Which two features must be used to prevent these situations from happening in the future? (Choose two.)
- A. peer-gateway
- B. system priority
- C. delay restore
- D. auto-recovery
- E. ip arp synchronize
Answer: C,D
Explanation:
System priority is related to LACP, not vPC, so it is out. ARP s
Reference:
https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/nx-os-software/212589-understanding-vpc-election-process.html
NEW QUESTION # 108
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION # 109
A cloud service provider is managing day-2 operations of over 200 blade servers installed in the Cisco UCS environment. This pool of network resources is providing virtual networks to their customers. To successfully operate this environment, frequent changes to vNICs and other operational policies are required across multiple UCS domains. The operations team must streamline these repetitive tasks. Which orchestration tool must be used to meet this requirement?
- A. Cisco UCS Manager
- B. Cisco ACI Multisite Orchestrator
- C. Cisco UCS Director
- D. Cisco DAN Center
Answer: C
NEW QUESTION # 110
An engineer working for a private telecommunication company with an employee id 4298 53 420 must evaluate connectivity to the new data centre location based on Cisco Nexus 7000 Series Switches. The IP connectivity is already supplied by the service provider. The solution must provide a Layer 2 extension and optimize the traffic localization Which technology supports these requirements?
- A. IS-lS multi site over ACl
- B. BGP over VPLS
- C. VXLAN over EoMPLS
- D. OTV over IP and multicast
Answer: D
NEW QUESTION # 111
An engineer is building a data center network with VXLAN EVPN. The requirement is to use multicast for the broadcast, unknown unicast, and multicast replication.
Which two VNI to multicast group mapping methods must be used to meet these requirements? (Choose two.)
- A. many VNI to one multicast group
- B. one NVE to many multicast groups
- C. many VNI to many multicast groups
- D. one VNI to one multicast group
- E. many NVE to one multicast group
Answer: A,B
NEW QUESTION # 112
An engineer is designing a disaster recovery solution. In the event of a node failure, the solution should either direct all of the traffic to another node, or load-balance the traffic across the remaining nodes. Which solution should be implemented in the design?
- A. active/passive
- B. cold standby
- C. active/active
- D. warm standby
Answer: C
NEW QUESTION # 113
An engineer is expanding an existing iSCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used:
{prefix}.2019-01.com.acme123:00.ffd0cb21.bcb392817521
Which addressing scheme was used in the environment?
- A. Extended Unique Identifier
- B. iSCSI Qualified Name
- C. Fibre Channel ID
- D. Network Address Authority
Answer: A
NEW QUESTION # 114
......
Positive Aspects of Valid Dumps 300-610 Exam Dumps! : https://www.certkingdompdf.com/300-610-latest-certkingdom-dumps.html
Share Latest 300-610Test Practice Test Questions, Exam Dumps: https://drive.google.com/open?id=1Plc-wYzw1YHRECPey2WivMxD0LEWQzP1