300-510 Certification Exam Dumps Questions in here [Feb-2022]
Updated 300-510 Exam Practice Test Questions
NEW QUESTION 10
A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances. Which description of the possible cause of issues in the routing domain is true?
- A. The interface mode ip router is-is command was not included in the script
- B. The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship
- C. The same interface cannot be advertised in two different IS-IS instances
- D. The IS-IS "ISP" and "ISP2" instances are unrelated and unable to intercommunicate
Answer: C
NEW QUESTION 11
What is used by SR-TE to steer traffic through the network?
- A. path policy
- B. shortest path calculated by IGP
- C. explicit maps
- D. dynamic rules
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/segment-routing/configuration/guide/b-seg-routing-cg-asr9k/b-seg-routing-cg-asr9k_chapter_0100.html
NEW QUESTION 12
Refer to the exhibit.
After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?
- A. The two routers have different IS-types.
- B. The two routers cannot authenticate with one another.
- C. The two routers have the same network ID.
- D. The two routers have the same area ID.
Answer: B
NEW QUESTION 13
What is the characteristic of enabling segment routing for IGPs?
- A. Segment routing must be enabled only under the routing process.
- B. Segment routing must first be enabled globally and then under the routing process.
- C. Segment routing must be enabled only globally.
- D. Segment routing must first be enabled under the routing process and then globally.
Answer: B
NEW QUESTION 14
Refer to the exhibit.
Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
- A. TenGigE0/1 interface provides the alternate path
- B. TenGigE0/2 interface provides the alternate path
- C. A primary path must be manually installed
- D. A backup path must be statically installed
Answer: B
NEW QUESTION 15
Refer to the exhibit.
Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
- A. It must be configured for graceful restart
- B. It must be configured with send labels
- C. It must be configured with PIC edge
- D. It must be configured with a route reflector
Answer: B
NEW QUESTION 16
A network engineer is troubleshooting OSPF multiare A.
Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?
- A. show ip ospf topology command
- B. hierarchical CLI
- C. routing process enabled by default on all interfaces
- D. DR support for topology management
Answer: B
Explanation:
Reference:
guide/rc40xr12k_chapter4.html#con_1059437
NEW QUESTION 17
Refer to the exhibit.
After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?
- A. The two routers have different IS-types.
- B. The two routers cannot authenticate with one another.
- C. The two routers have the same network ID.
- D. The two routers have the same area ID.
Answer: B
NEW QUESTION 18
Which two differences should be considered when deciding whether to implement to implement routing policies or route maps? (Choose two.)
- A. Route maps are implemented using hierarchical policies, but routing policies must be implemented sequentially.
- B. Route policies require sequence numbers, but route maps are implemented without sequencing.
- C. Route maps require an explicit deny at the end of the sequence, but routing policies have an implicit deny at the end of the program.
- D. Sequences are added after implementing a route map, but routing policies must be reconfigured when change is needed.
- E. Route maps are supported in Cisco 10S Software and routing policies are supported in Cisco IOS XR Software.
Answer: D,E
NEW QUESTION 19
Refer to the exhibit.
Routers R1 and R2 cannot form a neighbor relationship, but the network is otherwise configured correctly and operating normally. Which two statements describe the problem? (Choose two.)
- A. The two routers are in different subnets
- B. The two routers are in the same area
- C. The two routers are in different areas
- D. The two routers have the same network ID
- E. The two routers have password mismatch issues
Answer: A,C
NEW QUESTION 20
An engineer is troubleshooting slow performance issues on a customer's network after the last multicast configuration change was applied on it While checking the running configuration on the router the engineer notices there are many ip igmp join-group commands applied on several interfaces of the router which caused the high CPU utilization usage. What action must the engineer take to solve this issue?
- A. Configure ip igmp static-group command on all interfaces
- B. Remove unnecessary members from the IGMP group
- C. Remove ip igmp join-group command on all unnecessary interfaces
- D. Configure all router interfaces to be process-switched by increasing the query interval
Answer: C
NEW QUESTION 21
What is used by SR-TE to steer traffic through the network?
- A. path policy
- B. shortest path calculated by IGP
- C. explicit maps
- D. dynamic rules
Answer: A
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/segment-routing/configuration/ guide/b-seg-routing-cg-asr9k/b-seg-routing-cg-asr9k_chapter_0100.html
NEW QUESTION 22
Refer to the exhibit.
A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A. Only the default SSM range is permitted
- B. Only the administratively scoped range is permitted
- C. Only ASM is permitted
- D. Only GLOP is permitted
Answer: A
NEW QUESTION 23
Refer to the exhibit.
After troubleshooting BGP traffic steering issue, which action did the network operator take to achieve the correct effect of this configuration?
- A. Routes directly attached to AS 65517 have the local preference set to 150.
- B. Routes that have passed through AS 65517 have the local preference set to 150 and the traffic is denied.
- C. Routes that have passed through AS 65517 have the local preference set to 150.
- D. Routes that have originated through AS 65517 have the local preference set to 150.
Answer: C
NEW QUESTION 24 
Refer to the exhibit. Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
- A. It must be configured for graceful restart
- B. It must be configured with send labels
- C. It must be configured with PIC edge
- D. It must be configured with a route reflector
Answer: B
NEW QUESTION 25
Refer to the exhibit.
After troubleshooting BGP traffic steering issue, which action did the network operator take to achieve the correct effect of this configuration?
- A. Routes directly attached to AS 65517 have the local preference set to 150.
- B. Routes that have passed through AS 65517 have the local preference set to 150 and the traffic is denied.
- C. Routes that have passed through AS 65517 have the local preference set to 150.
- D. Routes that have originated through AS 65517 have the local preference set to 150.
Answer: C
NEW QUESTION 26
Refer to the exhibit.
CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 27
Refer to the exhibit.
Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
- A. Router 1 has a list of labels used to explicitly lay out a path to router 2.
- B. Router 2 is the head-end tunnel and has explicitly set a path to router 1.
- C. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
- D. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
Answer: C
NEW QUESTION 28
......
How to study the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
For the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam, Cisco offers several options on their website. Cisco provides classroom training through which Cisco’s authorized learning partners teach instructor-led classes all over the world. E-Learning solutions are provided by Cisco for exam preparation via self-paced online courses. Students are highly encouraged to join Cisco’s Certification community where they can join students from all over the world and learn together. After taking all the official training courses, 300-510 SPRI practice exams are a must to get a proper understanding of exam format and question types. For further exam self-study materials, refer to the links down below:
We recommend a combination of hands-on experience, completion of the training course, and self-study in the areas described in the Exam Outline section of this exam guide as preparation for this exam.
Hover on to Cisco’s Website and complete the official training course provided for the exam. Check for the topics mentioned in the Exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.
Verified 300-510 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump: https://drive.google.com/open?id=1FhEZaJB9aD7qxGxnCSU8RbwMO1uYJp3f
Pass CCNP Service Provider 300-510 Exam With 104 Questions: https://www.certkingdompdf.com/300-510-latest-certkingdom-dumps.html