Best Quality Network Appliance NS0-173 Exam Questions CertkingdomPDF Realistic Practice Exams [2021]
Critical Information To Cisco and NetApp FlexPod Design Specialist Pass the First Time
NEW QUESTION 35
A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects.
In this scenario, which three configurations are supported? (Choose three.)
- A. DualWire Management mode
- B. Cluster mode
- C. Direct Connect mode
- D. SingleConnect mode
- E. Multipath mode
Answer: A,C,D
Explanation:
Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect.
Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack- Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C- Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_C-Series- Integration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html
NEW QUESTION 36
Click the Exhibit button.
You are designing a FlexPod Datacenter solution for Microsoft Windows 2012 with Hyper-V. All hosts will boot from the SAN, including management hosts. The management hosts are Cisco C-Series servers.
Referring to the exhibit, which adapters are required to boot the management servers from the SAN?
- A. two 1GbE NICs
- B. two 10GbE NICs
- C. two 10GbE CNAs
- D. two 8Gb HBAs
Answer: B
NEW QUESTION 37
A customer has verified physical connectivity on the FlexPod. However, the LUNs are not available on the Cisco UCS server. To make the LUNs visible to the UCS, the customer must enable a switching feature for zoning.
In this scenario, what should the customer do?
- A. Enable NPIV on all switches.
- B. Enable Spine mode on all the Cisco Nexus 9000 switches.
- C. Enable NPV on all switches.
- D. Enable the device connector feature in Cisco UCS Manager.
Answer: D
NEW QUESTION 38
You want to deploy a FlexPod Datacenter solution based on the minimum hardware requirements.
Which three components must be deployed in highly available pairs to accomplish this task? (Choose three.)
- A. Cisco UCS Fabric Interconnects
- B. NetApp FAS Storage Controllers
- C. Cisco USC Nexus Switches
- D. Cisco APICs
- E. Cisco UCS 5108 Chassis
Answer: A,B,E
NEW QUESTION 39
A customer recently configured its Cisco UCS, and within the Chassis Discovery policy, they set the link group preference to Port Channel.
Which two benefits would they derive from this link group preference? (Choose two.)
- A. All the links between the Cisco Fabric Interconnects and chassis IOM are shared.
- B. Traffic is load balanced across the links.
- C. All the links between the Cisco Fabric Interconnects and chassis IOM are pinned.
- D. Each blade has an assigned Cisco Fabric Interconnects link.
Answer: A,B
NEW QUESTION 40
You are a data center architect at a service provider. You need to configure a new multi-tenant FlexPod service offering.
Which three UCS Manager features will you need to accomplish this task? (Choose three.)
- A. service profiles
- B. auto discovery
- C. virtualization support
- D. policies
- E. role-based access control
Answer: A,D,E
NEW QUESTION 41
A customer with a FlexPod Express configuration is currently operating Linux servers. The company wants to move to a Windows-centralized access method for the NetApp storage component.
In this scenario, which two ONTAP features must be configured? (Choose two.)
- A. SVM with the SMB protocol enabled
- B. Active Directory security model
- C. Workgroup security model
- D. SVM with the NFS protocol enabled
Answer: A,B
NEW QUESTION 42
Which Cisco Nexus series switch supports NX-OS standalone mode or Application Centric Infrastructure (ACI) fabric mode?
- A. Nexus 7000
- B. Nexus 5000
- C. Nexus 3000
- D. Nexus 9000
Answer: D
NEW QUESTION 43
You are designing a FlexPod solution with a 2-node storage system, multiple compute chassis, and ACI.
In this scenario, which two network switches are required? (Choose two.)
- A. core switch
- B. spine switch
- C. leaf switch
- D. cluster interconnect switch
Answer: B,C
NEW QUESTION 44
You are asked to design a FlexPod solution with a Cisco UCS B-Series chassis. There is no requirement for any Cisco UCS C-Series rack servers. You must ensure that there is a minimum of a 2500 VLAN or VSAN capacity per UCS domain.
In this scenario, which Cisco Fabric Interconnects do you select?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 45
A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?
- A. access mode
- B. switching mode
- C. end host mode
- D. trunk mode
Answer: B
NEW QUESTION 46
A customer wants to deploy a performance-sensitive workload while leveraging NetApp Snapshot technology and technologies such as NAS and SAN.
Which architecture satisfies these requirements?
- A. NetApp AFF
- B. NetApp SolidFire
- C. NetApp EF-Series
- D. NetApp StorageGRID
Answer: B
NEW QUESTION 47
Two data centers are 75km apart. The customer wants to deploy a FlexPod solution in each data center to maintain high availability between the two sites with minimal possible data loss.
In this scenario, which technology would you use at the NetApp storage layer?
- A. SnapVault
- B. SnapMirror
- C. FlexArray
- D. MetroCluster
Answer: D
NEW QUESTION 48
Your customer has a FlexPod configuration with a 4-node NetApp AFF A300 storage cluster that uses only NSE drives.
Which two solutions allow the customer to expand the current storage system? (Choose two.)
- A. a DS4246 with twenty-four 6 TB NL-SAS HDDs
- B. a two-node FAS8200 with a 4 TB NL-SAS HDD
- C. a DS224C with twenty-four 3.8 TB SSDs
- D. a two-node AFF A200 with a 3.8 TB NSE SSD
Answer: B,C
NEW QUESTION 49
A customer is planning to use a pair of MDS switches in a FlexPod design to host a few SAN workloads.
In this scenario, which two features should be enabled on the MDS switches for a successful configuration? (Choose two.)
- A. NPIV
- B. port-channel-trunk
- C. NPV
- D. fport-channel-trunk
Answer: A,B
NEW QUESTION 50
A customer is configuring the UCS to handle a multitenant environment. The customer has created an organization within UCS for each tenant and would like to allow access to these organizations for only users that belong to that tenant.
In this scenario, which feature in UCS Manager should the customer use to accomplish this task?
- A. User Roles
- B. Trusted Platform Module
- C. Service Profile
- D. Locales
Answer: C
NEW QUESTION 51
A customer is investigating options for implementing a FlexPod Datacenter solution that is using vSphere 6.x.
In this scenario, which two resources would be important to review? (Choose two.)
- A. Cisco Validated Design documents
- B. NetApp Technical Report
- C. Cisco Cloud Center documentation
- D. VMware vSAN documentation
Answer: A,B
NEW QUESTION 52
A customer has deployed a FlexPod Datacenter with Red Hat Enterprise Linux OpenStack Platform. The Cinder storage volumes that are attached to the Nova instances are not available.
Based on the terms of the cooperative support model, which three companies would the customer use to open a support case? (Choose three.)
- A. Cisco
- B. NetApp
- C. Red Hat
- D. VMware
- E. Microsoft
Answer: A,B,C
NEW QUESTION 53
After you install a FlexPod infrastructure at a customer site, you need to migrate the existing Vmware virtual machines off the infrastructure that was used before FlexPod was installed.
Which VMware vSphere feature accomplishes this task?
- A. vSphere HA
- B. vSphere DRS
- C. vMotion
- D. VM Component Protection
Answer: C
NEW QUESTION 54
A customer has installed FlexPod and verified that all wiring connections are correct. However, the customer cannot see any FC LUNs from the NetApp AFF systems.
In this scenario, which three configuration elements should the customer verify? (Choose three.)
- A. FC portsets
- B. FC zoning
- C. MTU configuration
- D. ALUA settings
- E. igroup configuration
Answer: A,C,E
NEW QUESTION 55
When FCoE is configured in a FlexPod environment, which step is required?
- A. Create a VSAN within service profiles.
- B. Assign a VSAN to the server uplink port on the Cisco Fabric Interconnects.
- C. Create a VSAN to support FCoE for the FC uplink.
- D. Assign a VLAN to the FC Uplink port on the Cisco Fabric Interconnects.
Answer: B
NEW QUESTION 56
A customer wants to deploy FlexPod for a VDI solution with 10,000 users, each with 10 GB of storage allocated.
To support this configuration, which three components must be sized? (Choose three.)
- A. the optical cable length
- B. the fabric interconnect ports
- C. the Cisco UCS servers
- D. the 1GbE ports from user systems
- E. the NetApp AFF storage
Answer: B,C,D
NEW QUESTION 57
You are configuring a FlexPod system for NAS protocols. You want to ensure that there are multiple paths between the initiators and targets in the solution.
Which two steps will accomplish this task? (Choose two.)
- A. Disable LACP.
- B. Configure the VSANs in the Cisco Nexus 5000 switches.
- C. Configure the VLANs in Cisco UCS Manager as Common/Global.
- D. Allow the VLANs over the vPC peer link.
Answer: A,C
NEW QUESTION 58
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. Telnet
- B. RDP
- C. SSH
- D. SAML
Answer: A,C
NEW QUESTION 59
......
NS0-173 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.certkingdompdf.com/NS0-173-latest-certkingdom-dumps.html