Salesforce OmniStudio-Developer Practice Verified Answers - Pass Your Exams For Sure! [2023]
Valid Way To Pass Salesforce Developer's OmniStudio-Developer Exam
NEW QUESTION # 20
A developer is creating a FlexCard and needs to display additional information using a Flyout.
Which two types of components can the developer embed m the flyout?
Choose 2 answer
- A. An OmniScript
- B. An Integration Procedure
- C. A Child FlexCard
- D. A DataRaptor
Answer: B,C
NEW QUESTION # 21
Which of these checkboxes helps prevent a DataRaptor Load from creating duplicate records?
- A. Is Required For Upsert
- B. s Disabled
- C. Is Lookup
- D. Upsert Key
Answer: D
NEW QUESTION # 22
A developer needs to retrieve data from an external system that stores policy dat a. The external system supports REST APIs to access and update the policies. Due to the volume of the policy data and peak hours of hours of business, calls to the REST APIs sometimes take longer than expected to response.
The developer creates an Integration Procedure to retrieve the policy data for use in an OmniScript.
Given the external system's knows performance issues, which configuration should be used to implement the call to the external system?
Choose 2 answers
- A. Check the Chain on Step Check on the HTTP Action in the Integration Procedure
- B. Configure a Remote action with timeout settings of 120000
- C. Check the Chainable checkbox on the integration procedure Action in the OmniScript
- D. Set the Timeout property on the HTTP Action in the Integration Procedure
Answer: A,B
NEW QUESTION # 23
A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, thedeveloper enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?
- A. The AccountId used for the preview is invalid.
- B. The DataRaptor Action did not have the add response Ro Response JSON property set to true.
- C. A Response Action was not added to the integration Procedure.
- D. The Response cannot be previewed directly.
Answer: C
Explanation:
Explanation
According to the OmniStudio Developer Guide, "To return a response from an Integration Procedure, add a Response action as the last action in your Integration Procedure." Therefore, the correct answer is C.
NEW QUESTION # 24
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the data.
What error could cause this behavior? Choose 2 answers Calculator
- A. The Input JSON paths in the DataRaptor Load do noi match the JSON sent from the OmniScript.
- B. Contextid is misspelled in the merge code that passes the Recordid fo the DataRaptor.
- C. The fields that are not updated are read only in Salesforce.
- D. In the DataRapior Load, in the preview tab, the Recordid is from the wrong record type. a
Answer: A,C
NEW QUESTION # 25
Refer to the exhibit below. What JSON from the DRGetContactDeteils action would display all six values correctlyshown? BlkCases is a Repeat Block, and the names of the elements are the same as the label names without spaces.
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Explanation
According to the OmniScript Data JSON page, the OmniScript structure JSON defines the data elements and their properties that are used in an OmniScript. The exhibit shows an OmniScript structure JSON with six elements: ContactName, ContactPhone, ContactEmail, CaseNumber, CaseSubject, and CaseStatus. The DRGetContactDetails action is a DataRaptor Extract action that retrieves data from the Contact and Case objects in Salesforce. The BlkCases element is a Repeat Block that displays a list of cases related to the contact. Therefore, the JSON from the DRGetContactDetails action that would display all six values correctly shown is option A, which has the following structure:
The other options have different structures that do not match the OmniScript structure shown.
NEW QUESTION # 26
You are troubleshooting an Integration Procedure with two elements: a Remote Action named FetchCart and a Response Action named ResponseCart. In PREVIEW, what JSON node shows the data sent to the Remote Action?
- A. FetchCartDebug
- B. ResponseCartDebug
- C. FetchCart
- D. ResponseCart
Answer: A
NEW QUESTION # 27
Which calculation procedure version in the list would execute on 2/15/2020 at 12:00 PM?
- A. Version Number 3
- B. Version Number 2
- C. Version Number 4
- D. Version Number 1
Answer: B
NEW QUESTION # 28
In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?
- A. It must bea matrixlookup step.
- B. It must be included in the calculation output.
- C. It must be a calculation step.
- D. It must be included in constants.
Answer: B
Explanation:
Explanation
In a calculation procedure, the output of a calculation step must be included in the calculation output in order to be used in an aggregation step. The calculation output defines the variables that are available for aggregation
NEW QUESTION # 29
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the dat
a. What error could cause this behavior?
Choose 2 answers
- A. The input JSON paths In the DataRaptor Load do not match the JSON from the OmniScript.
- B. In the DataRaptor Load, in the Preview tab, the Record is from the wrong record type.
- C. The fields that are not updated are read only in Salesforce.
- D. ContextId is misspelled in the merge code that passes the Recordld to the DataRaptor
Answer: A,C
NEW QUESTION # 30
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with actions to close the case and update the case, and it will be styled using the Community's theme.
What must the developer do to configure the FlexCard for deployment in a Community?
- A. Set the Target property in Publish Options to "CommunityPage"
- B. Configure the Component Visibility in the Custom Component
- C. Set the Deployment property in Card Configuration to "Community"
- D. Add the FlexCard's API name to the FlexCard Player component
Answer: A
NEW QUESTION # 31
Refer to the exhibit below. What is the marge code needed for this integration procedure structure to pass a CaseNumber node from the DRReadCase DataRaptor Extract Action to the HTTP Action's HTTP URL?
- A. ((CaseNumber))
- B. %DRReadCase: CaseNumber%
- C. ((DRRCase, CaseNumber))
- D. MTTOPDetCaseDetail: CaseNumber%
Answer: B
NEW QUESTION # 32
in a DataRaptor Extract JSON Path, which option below has the correct syntax for a relationship query for a native Salesforce record?
- A. Contact: Caseld:Subject
- B. Contact:Caseld__r-Subject
- C. ContactCaseld. Subject
- D. Contact:Caseld__rSubject
Answer: B
NEW QUESTION # 33
Refer to the exhibit below. What JSON from the DRGetContactDeteils action would display all six values correctly in the shown? BlkCases is a Repeat Block, and the names of the elements are the same as the label names without spaces.
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: A
NEW QUESTION # 34
What is the reason for this? Refer to the exhibit below.
- A. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- B. The flag passData.JSON in the parent OmniScript in not configured correctly.
- C. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- D. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
Answer: D
NEW QUESTION # 35
A developer has a requirement to create a child FlexCard that contain all of its parent FlexCard's records in a Datatable.
- A. {recordId}
- B. {Params records}
- C. {Records}
- D. {Records[0]}
Answer: C
NEW QUESTION # 36
A)
B)
- A. Option A
- B. Option B
Answer: A
NEW QUESTION # 37
In which two fields in an Integration Procedure or DataRaptor can you use a function like CONCAT or DATEDIFF? Choose 2 answers
- A. In a Remote Action in an Additional Output value field.
- B. In a DataRaptor in an Output Tab Output JSON Path.
- C. In a DataRaptor Action in an Input Parameters value field.
- D. In a Set Values Action in a Value field.
Answer: A,C
NEW QUESTION # 38
......
Passing the Salesforce OmniStudio-Developer exam requires a deep understanding of the platform and its features. OmniStudio-Developer exam covers topics such as data modeling, process automation, user interface design, and integration with external systems. Salesforce Certified OmniStudio Developer certification exam is challenging, but it is an excellent opportunity for professionals to demonstrate their skills and knowledge of Salesforce's OmniStudio platform.
Salesforce OmniStudio-Developer Pre-Exam Practice Tests | CertkingdomPDF: https://www.certkingdompdf.com/OmniStudio-Developer-latest-certkingdom-dumps.html
OmniStudio-Developer practice test questions, answers, explanations: https://drive.google.com/open?id=1Y2g2lvcwvAiGDgopaRE6fSB0X7mXVbTi