Practice Examples and Dumps & Tips for 2021 Latest HPE6-A71 Valid Tests Dumps
Latest [Dec 13, 2021] 100% Passing Guarantee - Brilliant HPE6-A71 Exam Questions PDF
How to book HP HPE6-A71: Aruba Certified Mobility Professional Exams
The registration for the HP HPE6-A71: Aruba Certified Mobility Professional Exam follows the steps given below:
- Step 1: Visit the website Pearson VUE
- Step 2: Navigate to Certifications
- Step 3: Search for the exam name HP HPE6-A71: Aruba Certified Mobility Professional
- Step 4: Book the exam
HP HPE6-A71: Aruba Certified Mobility Professional Exam Topics
Candidates must know the exam topics before they start preparation. Because it will help them in hitting the core. Our HPE6-A71 dumps will include the following topics:
Integrate and implement Aruba Mobile First architecture components and explain their uses.
- Differentiate the use of packet forwarding modes (tunnel, decrypt-tunnel, split-tunnel, and bridge)
- Integrate components of the Aruba Mobile First Architecture-
- Explain Remote Access architectures and how to integrate the architectures.
- Differentiate between redundancy methods, and describe the benefits of L2 and L3 clustering
- Differentiate between standalone mode and Master Controller Mode (MCM) features and recommend use cases
- Describe and differentiate advanced licensing features
Configure and validate Aruba WLAN secure employee and guest solutions.
- Configure Remote Access with Aruba Solutions such as RAP and VIA
- Configure and deploy redundant controller solutions based upon a given design.
- Configure a Mesh WLAN
Implement advanced services and security.
- Explain Clarity features and functions
- Implement Voice WLAN based upon a given design
- Implement mobility (roaming) in an Aruba wireless environment
- Configure primary zones and data zones to support MultiZone AP
- Implement Mobility Infrastructure hardening features
- Implement tunneled node to secure ArubaOS switches
- Configure an AAA server profile for a user or administrative access
- Enable multicast DNS features to support discovery across VLAN boundaries
- Configure role derivation, and explain and implement advanced role features
Manage and monitor Aruba solutions.
- Use AirWave to monitor an Aruba Mobility Master and Mobility Controller.
- Perform maintenance upgrades and operational maintenance.
Troubleshoot Aruba WLAN solutions.
- Troubleshoot issues related to services and security
- Troubleshoot the WLAN
- Troubleshoot Remote Access
- Troubleshoot role-based access, per-port based security and Airmatch
- Troubleshoot controller communication
NEW QUESTION 51
A branch office location has two buildings: an office and a small warehouse that are within 20 meters of each other. A RAP at the branch office provides connectivity to the corporate office network. This RAP isalso configured as a Remote Mesh Portal (RMP).
Which solution should the administrator implement to provide connectivity between the office and small warehouse buildings at the branch office location?
- A. Deploy a Remote Mesh Portal in the warehouse building to connect to the Remote Mesh Portal in the office building.
- B. Deploy a Remote Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office building.
- C. Deploy an ArubaOS-Switch in the warehouse building with tunneled node to connect to the Remote Mesh Portal in the office building.
- D. Deploy a Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office building.
Answer: A
NEW QUESTION 52
An administrator needs toauthenticate users connected to an ArubaOS-Switch where the switch authenticates the user, assign the firewall policies to the user, and processes some of the users' traffic. Which connection method should the administrator configure on the ArubaOS-Switch?
- A. Split-tunneled mode
- B. Per-user tunneled node
- C. VLAN tunneled mode
- D. Per-port tunneled node
Answer: D
NEW QUESTION 53
An administrator supports Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM) in a non- cluster deployment. The administrator performs these tasks on the MM for the MCs:
* Enables L3 IP mobility for the respective VAPs on the MCs
* Creates a L3 domain and places the MCs in the domain
However, roaming does not work when users roam from an AP connected to one controller in the domain to an AP connected to a different controller in the domain.
What must the administrator do to fix this problem?
- A. Configure the same VLANs on the Mobility Controllers in the L3 domain.
- B. Create a home-agent-to-foreign-agent mapping table.
- C. Re-provision the APs associated with the Mobility Controllers.
- D. Enable L3 IP Mobility globally on the Mobility Controllers.
Answer: B
NEW QUESTION 54
Anadministrator has multiple AAA servers, some Microsoft RADIUS and some ClearPass. When 802.1X users authenticate, the administrator wants to ensure that the authentication requests are handled by the appropriate AAA server. Users enter their username in this format: username@domain_name.
What must the administrator implement to ensure the correct AAA server processes the authentication request?
- A. server matching rules for the VAP profile
- B. server matching rules for the server group
- C. server matching rules for the AAA profile
- D. server matching rules for the 802.1X profile
Answer: B
NEW QUESTION 55
An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown below?
- A. AP load balancing is enabled.
- B. User load balancing is enabled.
- C. This is an L2-connected cluster.
- D. This is an L3-connected cluster.
Answer: A
NEW QUESTION 56
An administrator wants to deploy Zero Touch Provisioning (ZTP) with Activate. The controllers run ArubaOS.8.x.
Which Aruba architecture should the administrator deploy?
- A. AirWave
- B. Mobility Master-Mobility Controller
- C. Master-Local
- D. Standalone
Answer: B
NEW QUESTION 57
Refer to the exhibits.
Exhibit 1: WLAN VAP configuration
Exhibit 2: Microsoft NPS server configuration
Exhibit 3: Server group configuration for the VAP.
An employee authenticates with the username employee and the correct password. However, once the user authenticates, an administrator notices that the employee is assigned the authenticated role and not the desired employee role.
What should the administrator do to solve this problem?
- A. Change the server group name on the controller.
- B. Add a new server group rule on the controller.
- C. Reference the employee role in the WLAN VAP on the controller.
- D. Associate the user to the employee group in Microsoft NPS.
Answer: B
Explanation:
Explanation
We have to add new rule:
Filter-Id - equals - EMPL - string - set role - employee
NEW QUESTION 58
An administrator wants to implement AAA in an Aruba wireless environment that references two ClearPass servers for redundancy. To use these servers, what must the administrator create that will be referenced in the AAAprofile?
- A. Server Load Balancing
- B. Server matching rules
- C. Server Group
- D. ClearPass Group
Answer: C
NEW QUESTION 59
An administrator migrates Aruba Mobility Controllers (MCs) from ArubaOS.6x to ArubaOS.8. x. In the 6.x.
configuration, the administrator configures GRE tunnels on the local controllers to a controller in the DMZ to keep guest traffic off the corporate network. The problem with the solution is that is creates suboptimal routing paths.
Which feature should the administrator implement to solve this problem?
- A. MultiZone
- B. Clustering
- C. AirMatch
- D. Mobility
Answer: A
NEW QUESTION 60
Refer to the exhibit.
Controllers are configured in a cluster as shown in the exhibit. These are the network details.
-A Mobility Master (MM) managers the cluster.
-The cluster contains two controllers: C1 and C2.
-AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
-AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
- B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
- C. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
- D. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
Answer: B
NEW QUESTION 61
Refer to the exhibit.
An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?
- A. AP load balancing is enabled.
- B. This is an L2-connected cluster.
- C. This is an L3-connected cluster.
- D. User load balancingis enabled.
Answer: A
NEW QUESTION 62
Refer to the exhibit.
An administrator configures policies to allow RAPs to connect to the corporate office and remote users to access resources. Which function does the VPN address pool serve in this situation?
- A. Assigns IP addresses for remote users
- B. Assigns a public IP address that the RAP should use on its internet port
- C. Assigns a DHCP address pool for the RAP
- D. Assigns an inner IP address to the RAP used within the VPN
Answer: D
NEW QUESTION 63
Refer to the exhibit. What can the determined from the command shown in the exhibit?
- A. VRRP is used for Mobility Master redundancy.
- B. All the controllers run in standalone mode.
- C. All the controllers run in a cluster.
- D. MM2 is the Mobility Master.
Answer: A
NEW QUESTION 64
An administrator wants to change the default roles for the pre- and post-authentication user roles for a WLAN on a Mobility Master (MM). The controllers in the network perform all authentication.
Under the Managed Network hierarchy, where can the administrator assign these roles?
- A. AAA Server Group
- B. RADIUS attributes
- C. VLAN
- D. AAA Profiles
Answer: D
Explanation:
Explanation
References:
In the WebUI1. Navigate to the Configuration > Security > Authentication > AAA Profiles page.2.
Select the default profile or a user-defined AAA profile.3. Click the Initial Role drop-down list, and select the desired user role for unauthenticated users.4. Click the 802.1x Authentication Default Role drop-down list and select the desired user role for users who have completed 802.1x authentication.5.
Click the MAC Authentication Default Role drop-down list and select the desired user role for clients who have completed MAC authentication.6. Click Apply.
NEW QUESTION 65
An administrator uses a ClearPass server to perform user authentication and download the role configuration that should be applied to the user's session. The server is associated to an AAA profile of a VAP. However, when a user connects to the SSID of the VAP, they are assigned the default role.
What must the administrator do to ensure that the role is downloaded and used?
- A. Enable download role for CPPM in the VAP's WLAN profile.
- B. Enable server derivation in the AAA Server Group.
- C. Enable server derivation in the server group.
- D. Enableserver derivation in the ClearPass' RADIUS configuration.
Answer: D
NEW QUESTION 66
Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS.8.x?
- A. Mobility Master
- B. RAP
- C. BLE Beacon
- D. Mesh Point
Answer: A
NEW QUESTION 67
Refer to the exhibit.
Once connected to a WLAN, a user cannot reliably access resources in a company's network. Based on the output shown in the exhibit, what can be determined about the user's connection?
- A. The user has successfully authenticated through use of PEAP.
- B. The user is connected wirelessly to a controller.
- C. The user is connected to an ArubaOS-Switch.
- D. The user is connected to a controller through use of the VIA client.
Answer: C
NEW QUESTION 68
Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?
- A. PAPI
- B. IPSec
- C. SNMP
- D. VRRP
Answer: A
NEW QUESTION 69
Refer to the exhibit.
The branch office RAP shown in the exhibit provides secure wireless employee access. Because of security concerns, the company's security policy does not allow wireless guest access. Some customers that visit the Branch office need Internet access. A RAP's Ethernet Port 3 is used for wired guest access and Port2 is used for wired employee access. When employees connect to Port2, they are authenticated successfully and split-tunnel policy allows them access to both corporate and Internet resources from the Branch office. Guest users, however, cannot access Internet resources on Port 3.
How can the administrator provide guest users Internet access?
- A. Implement ClientMatch to handle the employee and guest user traffic correctly.
- B. Configure a bridge role for the wired RAP port.
- C. Create a guest VAP that allows wired RAP port access.
- D. Implement the MultiZone feature on the RAP.
Answer: B
Explanation:
Explanation
https://www.arubanetworks.com/techdocs/ArubaOS%206_3_1_Web_Help/Content/ArubaFrameStyles/Remote_
NEW QUESTION 70
Refer to the exhibit.
The branch office RAP shown in the exhibit provides secure wireless employee access. Because of security concerns, the company's security policy does not allow wireless guest access. Some customers that visit the Branch office need Internet access. A RAP's Ethernet Port 3 is used for wired guest access and Port2 is used for wired employee access. When employees connect to Port2, they are authenticated successfully and split-tunnel policy allows them access to both corporate and Internet resources from the Branch office. Guest users, however, cannot access Internet resources on Port 3.
How can the administrator provide guest users Internet access?
- A. Implement ClientMatch to handle the employee and guest user traffic correctly.
- B. Configure a bridge role for the wired RAP port.
- C. Create a guest VAP that allows wired RAP port access.
- D. Implement the MultiZone feature on the RAP.
Answer: B
NEW QUESTION 71
What can the administrator determine from the configuration shown below?
- A. VRRP is used for Mobility Master redundancy.
- B. All the controllers run in standalone mode.
- C. All the controllers run in a cluster.
- D. MM2 is the Mobility Master.
Answer: A
NEW QUESTION 72
An administrator at Campus A manages Aruba Mobility Controllers (MCs). The administrator defines a server group that includes a local ClearPass server and a remote Microsoft RADIUS server. The ClearPass server has the credentials for users at Campus A and the Microsoft RADIUS server has the credentials for users at Campus В. Users at Campus A successfully authenticate and connect to the Campus A wireless network.
However, when users from Campus В visit Campus A they fail authentication.
What can the administrator do to solve this problem?
- A. Enable EAP termination on the ClearPass server.
- B. Enable machine authentication on the Mobility Controllers.
- C. Enable EAP-TTLS with EAP Termination on the Mobility Controllers.
- D. Enable FastConnect on the Campus A Mobility Controllers.
Answer: B
NEW QUESTION 73
An administrator wants to dynamically upgrade AppRF on Aruba Mobility Controllers (MC) in a cluster. The administrator does not want to reboot the system at the time of the upgrade.
What should the administrator use for this upgrade?
- A. Upgrade Profiles
- B. Loadable Service Module (LSM)
- C. Aruba image
- D. Cluster Upgrade Manager
Answer: B
NEW QUESTION 74
......
HPE6-A71 are Available for Instant Access: https://www.certkingdompdf.com/HPE6-A71-latest-certkingdom-dumps.html