Pass F5 303 Actual Free Exam Q&As Updated Dump Aug 06, 2022
Latest 303 Actual Free Exam Updated 525 Questions
NEW QUESTION 119
A BIG-IP Administrator needs to remove a pool specific health monitor. There is a pool named Best Pool with two members, one named Best pool member and one named Best pool member2. In the Local Traffic section of the administrative GUI, which stops should the BIG-IP Administrator take to remove a pool level monitor?
- A. Monitors > Monitor Name> Instances
- B. Pool > Pool List> Best Pool > Health Monitors
- C. Pool > Pool List > Best Pool > Members > Health Monitors
- D. Nodes > Node List> Best _pool_memberl > Heath Monitors
Answer: B
NEW QUESTION 120
A VLAN has the following objects configured:
Self-IP 10.10.10.100 with port lockdown set to Allow default
Virtual server 10.10.10.100:443 with UDP profile enabled
Virtual server 10.10.10.0/24 port forwarding virtual server
Global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100 Which object will process this request when https://10.10.10.100 is entered into a browser?
- A. virtual server 10.10.100/24 port o forwarding virtual server
- B. self-IP 10.10.10.100 with port lockdown set to Allow default
- C. global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100
- D. virtual server 10.10.10.100.443 with UDP profile enabled
Answer: B
NEW QUESTION 121
What is the status of a pool member when manual resume is enabled and a health check first fails and then passes?
- A. Offline (Disabled)
- B. Offline (Enabled)
- C. Available (Disabled)
- D. Available (Enabled)
Answer: A
NEW QUESTION 122
An LTM Specialist needs to configure asetup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.
Which two server type should be used? (Choose two.)
- A. Internal
- B. Forwarding IP
- C. Performance HTTP
- D. Standard
- E. Stateless
Answer: A,D
NEW QUESTION 123
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on theserver must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?
- A. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.
- B. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.
- C. set the Send String to GET Arian and the Receive Disable String to 200 andReceive String to 201.
- D. set the Send String to GET/status html and the Receive String to 200 and Receive Disable String to 201.
Answer: B
NEW QUESTION 124
A 8IG-IP device is replaced with an RMA device. The BIG-IP Administrator renews the license and tries to restore the configuration from a previously generated UCS archive on the RMA device. The device configuration is NOT fully loading. What is causing the configuration load to fail?
- A. The clock is NOT set correctly
- B. The US does NOT contain the full config
- C. The Device Group is NOT configured for Full Sync.
- D. The Master Key is NOT restored
Answer: D
NEW QUESTION 125
-- Exhibit -
-- Exhibit --
Refer to the exhibit.
An LTM device is used to load balance web content over a secure channel.
The developers of the web content have done a trace using an HTTP profiler application. They believe that allowing the LTM device to compress traffic to the client will improve performance. The client can utilize GZIP or deflate compression algorithms.
An LTM Specialist must implement the compression.
The LTM Specialist has completed the following actions:
1. Create the relevant profile.
2. Apply the relevant profile to the virtual server (VS).
After applying the relevant profile, the LTM device is failing to compress the traffic. Instead, the traffic is being served with an error.
What is the problem?
- A. The incorrect compression algorithm is applied to the compression profile.
- B. The Protocol Profile (Client) option of "Allow Compression" needs to be enabled.
- C. The LTM device CANNOT SSL offload the traffic in order to read and compress it.
- D. The Protocol Profile (Server) option of "Allow Compression" needs to be enabled.
Answer: C
NEW QUESTION 126
A 8IG-IP Administrator configures a node with a standard icmp Health Monitor. The Node shows as DOWN although the Backend Server is configured to answer ICMP requests. Which step should the administrator take next to find the root cause of this issue?
- A. Run a qkview
- B. Runanssldump
- C. Runatcpdump
- D. Run a curl Run a qkview
Answer: C
NEW QUESTION 127
An LTM Specialist connects to an LTM device via the serial console cable and receives unreadable output.
The LTM Specialist is using the appropriate cable and connecting it to the correct serial port.
Which command should the LTM Specialist run through ssh to verify that the baud rate settings for the serial port are correct on the LTM device?
- A. tmsh edit /sys console
- B. tmsh list /sys console
- C. tmsh show /sys console
- D. tmsh show /ltm console
Answer: C
NEW QUESTION 128
The BIG-IP Administrator creates a custom iRule that fails to work as expected. Which F5 online resource should the administrator use to help resolve this issue?
- A. DevCentral
- B. Health
- C. University
- D. Bug Tracker
Answer: A
NEW QUESTION 129
A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow.
The client side flow source IP is 192.168.0.10 .
Which source IP should be expected inthe server-side connection?
- A. 10.20.0.2
- B. 10.20.0.1
- C. 192.168.0.10
- D. 10.50.0.2
Answer: A
NEW QUESTION 130
Given LTM device ltm log:
Sep 26 20:51:08 local/lb-d-1 notice promptstatusd[3695]: 01460006:5: semaphore mcpd.running(1) held Sep 26 20:51:08 local/lb-d-1 notice promptstatusd[3695]: 01460006:5:
Sep 26 20:51:08 local/lb-d-1 warning promptstatusd[3695]: 01460005:4: mcpd.running(1) held, wait for mcpd Sep 26 20:51:08 local/lb-d-1 info sod[3925]: 010c0009:6: Lost connection to mcpd - reestablishing.
Sep 26 20:51:08 local/lb-d-1 err bcm56xxd[3847]: 012c0004:3: Lost connection with MCP: 16908291 ...
Exiting bsx_connect.cpp(174)
Sep 26 20:51:08 local/lb-d-1 info bcm56xxd[3847]: 012c0012:6: MCP Exit Status Sep 26 20:51:08 local/lb-d-1 info bcm56xxd[3847]: 012c0012:6: Info: LACP stats (time now:1348717868) :
no traffic
Sep 26 20:51:08 local/lb-d-1 info bcm56xxd[3847]: 012c0014:6: Exiting...
Sep 26 20:51:08 local/lb-d-1 err lind[3842]: 013c0004:3: IO error on recv from mcpd - connection lost Sep 26 20:51:08 local/lb-d-1 notice bigd[3837]: 01060110:5: Lost connection to mcpd with error 16908291, will reinit connection.
Sep 26 20:51:08 local/lb-d-1 err statsd[3857]: 011b0004:3: Initial subscription for system configuration failed with error '' Sep 26 20:51:08 local/lb-d-1 err statsd[3857]: 011b0001:3: Connection to mcpd failed with error '011b0004:3:
Initial subscription for system configuration failed with error '''
Sep 26 20:51:08 local/lb-d-1 err csyncd[3851]: 013b0004:3: IO error on recv from mcpd - connection lost
.............skipping more logs.....
Sep 26 20:51:30 local/lb-d-1 notice sod[3925]: 01140030:5: HA proc_running bcm56xxd is now responding.
Sep 26 20:51:34 local/lb-d-1 notice sod[3925]: 01140030:5: HA proc_running mcpd is now responding.
Sep 26 20:51:34 local/lb-d-1 notice sod[3925]: 010c0018:5: Standby
Which daemon failed?
- A. sod
- B. mcpd
- C. promptstatusd
- D. bcm56xxd
- E. lind
Answer: B
NEW QUESTION 131
Refer to the exhibit.
An LTMSpecialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.
Which command sill correct the issue?
- A. {Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}
- B. {/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip
- C. {/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10 208.102.254 }}
- D. {/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102
254)}
Answer: B
NEW QUESTION 132
A BIG-IP Administrator is receiving intermittent reports from users that SSL connections to the BIG-IP device are failing. Upon checking the log files, the BIG-IP Administrator notices the following error message:
ere tmm<instance>[<pid>]: 01260008:3: SSL transaction (TPS) rate limit reached After reviewing statistics, the BIG-IP Administrator notices there are a maximum of 1200 client-side SSL TPS and a maximum of 800 server-side SSL TPS.
What is the minimum SSL license limit capacity the BIG-IP Administrator should upgrade to handle this peak?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 133
A virtual serverconfiguration for traffic destined to a server is as shown:
HTTP traffic is destined to the 10 10.20.1 server from the source
Based on precedence, which virtual server accepts this traffic?
- A. MyvS1
- B. MyVS3
- C. MyVS2
- D. MyVS4
Answer: C
NEW QUESTION 134
Refer to the exhibit.
A
user notifies the BIG-IP Administrator that http://remote company.com is NOT accessible. Remote access to company resources must be encrypted.
What should the BIG-IP Administrator do to fix the issue?
- A. Change the Type of the Virtual Server remote.company.com_vs to Forwarding
- B. Change the Listening Port on remote.company.com_vs to Port 80
- C. Add a Pool to the Virtual Server remote.company.com_VS
- D. Add an iRule to remote.company.com_vs to redirect Traffic to HTTPS
Answer: D
Explanation:
Explanation
Requiring all traffic to be HTTPS access requires HTTP requests to be redirected directly to HTTPS.
NEW QUESTION 135
An LTM Specialist is troubleshooting a problem on an eCommerce website. The user browses the online store using port 80, adding items to the shopping cart. The user then clicks the "Checkout" button on the site, which redirects the user to port 443 for the checkout process. Suddenly, the user's shopping cart is shown as empty.
The shopping cart data is stored in memory on the server, and the default source address persistence profile is used on both virtual servers.
What is the issue?
- A. The port 80 and port 443 connections are balanced to different nodes.
- B. The port 443 pool member is deleting the user's session cookie.
- C. The port 80 pool member is deleting the user's session cookie.
- D. The port 80 and port 443 connections are balanced to the same node.
Answer: A
NEW QUESTION 136
Interface 1.2 on a BIG-IP VE has a status of UNINITIALIZED. What is the reason for this status?
- A. No default route has been created.
- B. Interface 1.2 has been added to a trunk.
- C. Interface 1.2 has NOT been assigned to a VLAN.
- D. Interface 1.2 has been disabled.
Answer: C
Explanation:
Explanation
trunk is a portchannel, you need to add a physical interface.
NEW QUESTION 137
-- Exhibit -
-- Exhibit --
Refer to the exhibit.
Which step should an LTM Specialist take to utilize AVR?
- A. license the device for AVR
- B. reboot the device
- C. provision AVR
- D. install the AVR add-on
Answer: C
NEW QUESTION 138
-- Exhibit -
-- Exhibit --
Refer to the exhibit.
An LTM Specialist is investigating intermittent page load issues being reported by users.
What should the LTM Specialist do to resolve the issue?
- A. Assign an HTTP monitor to the pool.
- B. Remove least connections load balancing method on virtual server.
- C. Remove HTTP monitor on the pool.
- D. Select least connections load balancing method on virtual server.
Answer: A
NEW QUESTION 139
What should the 816-IP Administrator provide when opening a new ticket with F5 Support?
- A. SSL private keys
- B. Device root password
- C. bigip.license file
- D. QKViewfile
Answer: D
NEW QUESTION 140
-- Exhibit -
-- Exhibit --
Refer to the exhibit.
An LTM Specialist has created a virtual server to balance connections to a pool of application servers and offload SSL decryption. Clients connect to the application at https://www.example.com/. The virtual server is configured with a clientssl profile but no serverssl profile. The application servers are listening on ports 80 and
443. Users are unable to connect to the application through the virtual server but are able to connect directly to the application server.
What is the root cause of the error?
- A. The pool members are configured with the wrong port.
- B. The application servers are redirecting users to HTTPS.
- C. The LTM device is redirecting users to HTTPS.
- D. The LTM device is chunking responses.
Answer: B
NEW QUESTION 141
What is the effect of an iRule error such as referencing an undefined variable?
- A. The execution of the current event within the iRule will be terminated.
- B. The connection will continue, but the iRule will NOT be executed again for the lifetime of the connection.
- C. The iRule execution will continue with the next statement.
- D. The iRule execution will be terminated, and both the client and server side connections will be reset.
Answer: D
NEW QUESTION 142
-- Exhibit -
-- Exhibit --
Refer to the exhibit.
A user is unable to access an HTTP application via a virtual server.
What is the cause of the failure?
- A. The host header requires a host name.
- B. The virtual server is in the disabled state.
- C. The Connection: Keep-Alive header is set.
- D. There is no pool member available to service the request.
Answer: D
NEW QUESTION 143
-- Exhibit -
-- Exhibit --
Refer to the exhibits.
How should the LTM Specialist minimize the configuration?
- A. The configuration is as minimized as possible.
- B. Create a single monitor, apply it to the pool, and remove the pool member level monitors.
- C. Remove the pool member level monitors.
- D. Create a single monitor and apply it to each pool member.
Answer: B
NEW QUESTION 144
......
Online Questions - Valid Practice 303 Exam Dumps Test Questions: https://www.certkingdompdf.com/303-latest-certkingdom-dumps.html