[Nov 13, 2021] HPE0-S22 Exam Dumps, HPE0-S22 Practice Test Questions
Free HPE0-S22 Study Guides Exam Questions & Answer
NEW QUESTION 15
An architect proposes an HPE Moonshot server solution for a customer. The customer needs a single processor solution with a network switch to allow 10Gb connectivity and support for a software-defined network solution.
Which HPE Moonshot switch module meets the customer's needs?
- A. 45XGc Switch Module
- B. 180G Switch Module
- C. 45Gc Switch Module
- D. 45G Switch Module
Answer: A
NEW QUESTION 16
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image, and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution.
Which solution meets these requirements?
- A. HPE Insight Control server provisioning (ICsp)
- B. HPE Intelligent Provisioning (IP)
- C. HPE OneView 2.0
- D. HPE Insight Cluster Management Utility (CMU)
Answer: D
Explanation:
Explanation
NEW QUESTION 17
A software development customer's data center has servers from three different vendors.
The customer plans to purchase 15 HPE c7000 enclosures that are populated with BL460c
Gen9 blades. Each enclosure will be deployed with HPE OneView advanced licensing. The customer uses third-party SNMP-based management tools as well as some custom dashboards that were written to monitor the statue of the datacenter.
The infrastructure management team is concerned about how to integrate HPE OneView into its management strategy.
What should the architect demonstrate?
- A. how to access HPE OneView data and incorporate it into the internally developed dashboards using the REST API
- B. how to use HPE OneView as the dashboard for the existing monitoring tools using the
REST API - C. how to access HPE OneView data and incorporate it into the internally developed dashboards using the iLO RIBCL command language
- D. how to point the existing serversto the new HPE OneView instance for all SNMP traps
Answer: A
NEW QUESTION 18
An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution.
What is a valid reason to select 10GbE?
- A. The customer needs the system to recover quickly from a failure.
- B. The customer plans to increase the memory in the nodes in the future.
- C. The customer's network infrastructure is based on QoS service.
- D. The customer needs the object storage servers to be able to locate random data on a disk more quickly.
Answer: D
NEW QUESTION 19
A customer needs a hosted physical desktop solution. Users will run typical office applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost- effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?
- A. HPE m710p
- B. HPE m700
- C. HPE m710
- D. HPE m400
Answer: A
Explanation:
Explanation/Reference: https://www.hpe.com/us/en/product-catalog/servers/moonshot-systems/pip.hpe-proliant-m710p- server-cartridge.8732043.html
NEW QUESTION 20
An architect is discussing advantages of the Software Defined Datacenter concept used by HPE OneView with a customer. The customer is focused on improving the data center agility and manageability.
Which key benefit of the SDDC should the architect discuss with customer?
- A. offers a virtual machine self-service solution
- B. various elements of the infrastructure are virtualized and delivered as a service
- C. results in significant power and cooling expense reduction
- D. improved IRR and NPV results for the customer
Answer: B
NEW QUESTION 21
An architect has selected the FlexibleLOM option fur HPE XL230a compute trays, which will host an HPC application.
When should the architect select a FlexibleLOM adapter that supports Fibre Channel over Ethernet (FCoE)?
- A. when the application uses parallel computing and relies on Fibre Channel to reduce latency for communications between compute nodes
- B. when the application uses a Fibre Channel storage area network (SAN) for its shared storage solution
- C. when the application requires additional bandwidth and needs a solution for load sharing traffic over multiple links
- D. when the application requires high throughput between processors and disk drives local to the same compute tray
Answer: A
NEW QUESTION 22
A customer has a Hadoop big data and analytics solution. The customer needs a server upgrade to improve performance for this solution and plans to add more solutions that draw on the data, such as a Cassandra NoSQL database. The customer is interested in a flexible HPE Big Data Reference Architecture approach.
Which solution meets the customer's needs?
- A. HPE Apollo 4530 Systems for co-located compute and storage nodes
- B. HPE Moonshot 1500 Systems with m710 cartridges for the compute nodes and HPE Apollo 4200 Systems for the storage nodes
- C. HPE Moonshot 1500 Systems with m700 cartridges for co-located compute and storage nodes
- D. HPE Apollo 8000 Systems for the compute nodes and HPE Superdome X Systems for the storage nodes
Answer: B
NEW QUESTION 23
What is a basic assumption for an architect using the HPE Servers TCO calculator to justify a customer's migration away from a fully depreciated set of hardware?
- A. The Net Present Value (NPV) is the difference between the value of the older systems and the cost of the new systems.
- B. By analyzing the project's internal rate of return (IRR), it is possible to determine if the lower IRR will make it more desirable to undertake the project.
- C. The opportunity costs of not migrating from a legacy environment to an HPE Converged Infrastructure Solution, in terms of IT Efficiency and User Productivity, will always justify the purchase.
- D. When the customer's older systems are under a support contract, a new system can sometimes pay for itself simply by not renewing the older support contracts.
Answer: A
NEW QUESTION 24
A customer requests a proposal for an HPE Apollo 4530 system. The customer reports that it has experienced problems in the past with boot time malware attacks within its environment.
Which solution should the architect propose to protect the customer from this threat?
- A. Use Smart Array Controllers.
- B. Enable Legacy BIOS mode.
- C. Use encrypted drives.
- D. Enable UEFI secure boot mode.
Answer: D
Explanation:
Explanation/Reference:
Reference http://docs.software.hpe.com/SA/10.51/Content/admin_guide/
SA_10.1x_OS_Installation_SecureBootCapableServers.htm
NEW QUESTION 25
DRAG DROP
Select all that apply.
Click and drag the Network Interface on the left to match it with its HPE Server Family on the right.
Answer:
Explanation:
NEW QUESTION 26
Select all that apply.
Click and drag the Network Interface on the left to match it with its HPE Server Family on the right.
Answer:
Explanation:
NEW QUESTION 27
A customer plans to develop scripts that use the REST API for HPE OneView. However, the customer is concerned about the complexity of the scripts.
Which tool can be used to adopt the HPE OneView REST API quicker?
- A. HPE Python library for HPE OneView
- B. HPE iLO4 using RedFish
- C. HPE SmartStart Scripting Toolkit
- D. HPE Operations Analytics for HPE OneView
Answer: D
NEW QUESTION 28
An architect is planning an HPE Moonshot System to host a customer Hadoop MapReduce2 application.
The architect originally proposed the following:
m710 cartridges
HPE 45XGc switches
HPE 4-QSFP+ Uplink Modules
The customer now needs each HPE Moonshot chassis to provide at least 1TB of memory and 40TB or local storage.
Cartridge nodes needs two 10GbE ports each.
What does the architect need to replace in the solution to meet the customer's new requirements?
- A. 45XGc switches with 180G switches, which provide the required two 10GbE ports to the cartridges
- B. 4-QSFP+ Uplink Modules with 16-SFP+ Uplink Modules, which provide 10GbE ports to the cartridges
- C. m710 cartridges with m710p cartridges, which support higher capacity local drives
- D. m710 cartridges with m350 Cartridge, which provide more memory
Answer: B
NEW QUESTION 29
A customer has an HPE Integrity Superdome X system with an nPartition that has been provisioned with a supported OS and application.
What first detects data corruption caused by an installed DIMM module?
- A. the application using the data
- B. the OS installed on the nPartition
- C. the Superdome X firmware
- D. the XNC2 controller in the internal fabric
Answer: C
NEW QUESTION 30
A customer plans to purchase some c7000 blade enclosures equipped with Virtual Connect FlexFabric modules to support its development and test team. The customer is concerned about frequent changes to the server blade connectivity. In the initial proposal, an architect included HPE OneView, and now the customer wants to learn how HPE OneView will address their concern.
Which HPE OneView functionality should the architect explain to the customer?
- A. the customer can use different plugins to visualize network and storage connectivity, and change them by using the drag and drop method.
- B. the customer can access HPE Virtual Connect Enterprise Manager and perform connectivity changes for all servers in the same Virtual Connect Domain Group.
- C. all external connectivity changes will be automatically discovered and server profiles will be automatically updated to reflect the change.
- D. the customer can create profile templates, deploy server profiles from the template, and, if necessary, use the same method to update server connectivity.
Answer: A
NEW QUESTION 31
An architect reviews an HPE Apollo 6000 design and finds that there are plans for redundant iLO connections on each HPE Apollo 6000 chassis to a pair of top-of-rack switches. These switches are set up as individual switches connected to a single core.
Which configuration change should the architect recommend to ensure a loop free management topology?
- A. Configure IRF between the top-of-rack switches.
- B. Configure MAD between the top-of-rack switches.
- C. Replace the top-of-rack switches with HPE Advanced Power Management Kits.
- D. Remove one iLO connection from each HPE Apollo 6000 chassis.
Answer: A
NEW QUESTION 32
An architect is planning an HPE Moonshot System to host a customer Hadoop MapReduce2 application. The architect originally proposed the following:
* m710 cartridges
* HPE 45XGc switches
* HPE 4-QSFP+ Uplink Modules
The customer now needs each HPE Moonshot chassis to provide at least 1TB of memory and 40TB or local storage.
Cartridge nodes needs two 10GbE ports each.
What does the architect need to replace in the solution to meet the customer's new requirements?
- A. 45XGc switches with 180G switches, which provide the required two 10GbE ports to the cartridges
- B. 4-QSFP+ Uplink Modules with 16-SFP+ Uplink Modules, which provide 10GbE ports to the cartridges
- C. m710 cartridges with m710p cartridges, which support higher capacity local drives
- D. m710 cartridges with m350 Cartridge, which provide more memory
Answer: B
Explanation:
Explanation
NEW QUESTION 33
A customer needs a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis that are fully populated with cartridges. The populated chassis provide the following in total:
135 processors with 4 2.9GHz cares each
4. 32TB RAM
64.8TB local storage on SSDs
Which aspect or the design is under provisioned and is likely to cause performance to be degraded to one- tenth or even one-hundredth of its potential?
- A. amount of RAM
- B. number of cores per processor
- C. number of processors
- D. amount of local storage on SSDs
Answer: D
NEW QUESTION 34
An architect is planning an HPE Moonshot System solution to support a data analytics application. The application uses data mining.
Which type of rack configuration should the architect recommend?
- A. a configuration that balances the ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- B. a configuration that has a higher ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- C. a configuration that has a lower ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- D. a configuration in which the HPE Moonshot System hosts the analytics application and the data
Answer: B
NEW QUESTION 35
An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution.
What is a valid reason to select 10GbE?
- A. The customer needs the system to recover quickly from a failure.
- B. The customer plans to increase the memory in the nodes in the future.
- C. The customer's network infrastructure is based on QoS service.
- D. The customer needs the object storage servers to be able to locate random data on a disk more quickly.
Answer: D
NEW QUESTION 36
A customer needs to order an HPE Apollo 2000 chassis and compute trays. The customer's requirements are as follows:
- Four nodes
- SATA SSD storage of 23TB
- HPE Secure Encryption on the storage
Which compute tray should the architect recommend?
- A. XL230a
- B. XL220a
- C. XL190r
- D. XL170r
Answer: C
NEW QUESTION 37
A customer is planning a multi-threaded HPC solution that would benefit from threads running in parallel.
The architect selects the HPE Apollo 6000 and needs to choose between the HPE XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?
- A. The HPE XL250a server delivers dual processor performance.
- B. The HPE XL250a server provides full length PCIe expansion slots.
- C. The HPE XL250a server supports DDR4 HPE Smart Memory.
- D. The HPE XL250a server supports dual accelerators.
Answer: D
Explanation:
The HPE ProLiant XL250a Gen9 Server delivers 2P performance for your budget with dual accelerator support, while leveraging the HPE Apollo 6000 System and its modular flexibility and rack-scale efficiency. This server features the Intel® Xeon® E5-2600 v3/v4 series processors and 16 DIMM slots are ready with DDR4 2133 (1024 GB maximum)/2400 (2048 GB maximum) MHz memory and HPE Smart Memory.
References:
NEW QUESTION 38
......
HPE Master ASE - Server Solutions Architect (HPE0-S22) Certification Exam cost is as follow
The price of HPE Master ASE - Server Solutions Architect (HPE0-S22) exam is $200 USD.
HPE0-S22 Exam Dumps, HPE0-S22 Practice Test Questions: https://www.certkingdompdf.com/HPE0-S22-latest-certkingdom-dumps.html