[Jul 30, 2022] Get Latest and 100% Accurate 1z0-1045-22 Exam Questions
Maximum Grades By Making ready With 1z0-1045-22 Dumps
Oracle 1z0-1045-22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 41
Your company is looking for a simplified method for managing a group of reports. Identify the type of report used in WMS Cloud that compiles multiple existing reports into a single document while executing each report in a single order.
- A. Chained Report
- B. Standard Report
- C. Linked Report
- D. Express Report
- E. CrossTab Report
Answer: A
NEW QUESTION 42
Consider that in your company you are handling lot number tracking of items.
Which two statements are true regarding lot management? (Choose two.)
- A. Once can allocate the Inventory against the lot number during waving against an Outbound Order.
- B. A batch number in the Batch Management UI has to be always linked to an expiry date.
- C. A received IBLPN can have multiple lot number-tracked SKUs with different lot number inventory at any point of time.
- D. After performing the Putaway of an IB LPN, which is having the lot number, the lot number will not be transferred to the Active location.
Answer: A,C
NEW QUESTION 43
As an Inventory Super User, you are configuring LPNs per tier and Tiers per Pallet fields at Item Details screen.
Which statement is true about LPNs per tier and Tiers per Pallet?
- A. LPNs per tier and Tiers per pallet are used to define the standard number of case and pack for an Item during receiving.
- B. LPNs per tier and Tiers per Pallet are used to define number of IB LPN per tier during receiving.
- C. LPNs per tier and Tier per Pallet are used to define the standard number of LPNs acceptable per pallet during receiving.
- D. LPNs per tier and Tiers per Pallet are used to define number of Ob LPN per tier during shipping.
Answer: A
NEW QUESTION 44
A Purchase order created in ERP is downloaded to WMS Cloud.
Which two statements are correct related to the Purchase order update? (Choose two.)
- A. UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details.
- B. The RE-CREATE action code if sent for an existing PO, the same PO will be deleted and re-created with the new details.
- C. Purchase order can be re-created by sending the RE-CREATE action code when the status is In- Receiving.
- D. UPDATE is sent in the Header and CREATE in the Detail for an existing Purchase Order line. The application will add up the corresponding "Order Quantity".
- E. The Purchase order header can be updated by sending an UPDATE action code when the status is in Created and Received.
Answer: A,E
NEW QUESTION 45
Select the two routing configurations that are used to specify routes for outbound loads. (Choose two.)
- A. the Routing Mode on the Carrier UI Screen
- B. the Routing Mode on the Wave Template
- C. the company parameter PACKING_ROUTING_MODE
- D. the Routing_Mode parameter on the Loading RF Transaction
Answer: A,D
NEW QUESTION 46
The following configuration is set for the Advance Shipment Notification type: 10% Under Receipt Warning, 10% Over Receipt Warning, and 20% Over Receipt error.
Which two statements match the condition set if the ASN Qty is 100? (Choose two.)
- A. When the Operator receives 89, the RF screen displays an Under Receipt warning message.
- B. When the Operator receives 110, the RF screen displays an Over Receipt warning message.
- C. When the Operator receives 101, the RF screen displays an Over receipt warning message.
- D. When the Operator receives 125 units, the RF screen displays an Over Receipt warning message.
- E. When the Operator receives 130 units, the RF screen displays an Over Receipt error message.
Answer: A,E
Explanation:
Used to display a warning message when the user over-receives the ASN detail by above the defined % value. The user may choose to override this message.
NEW QUESTION 47
Select two configurations required to fulfill a Cross Dock order. (Choose two.)
- A. The Cross Dock Outbound Order type should be defined
- B. The Replenishment template is required to replenish Cross Dock Order
- C. Module Parameter should be enabled on the RF Receive Screen for receiving Cross Dock ASN
- D. Wave template should be configured to allocate Cross Dock Order
- E. IB Shipment Type should be defined for Cross Dock ASN
Answer: B,E
NEW QUESTION 48
Your customer wants to Putaway LPN to Location by using the Putaway Rules and link the location with the Replenishment Zone.
Which four configurations are required? (Choose four.)
- A. Set Criteria for Putaway Rules.
- B. Putaway Priority and Rules are set at Facility Level.
- C. Set Replenishment Zone for Reserve Location.
- D. Set Replenishment Zone for Active Location.
- E. Set the Location Size Type at Facility Level.
- F. Putaway Type is set at Facility Level.
Answer: B,D,E,F
NEW QUESTION 49
You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch.
Which three are valid? (Choose three.)
- A. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.
- B. The from-IBLPN and the to-IBLPN might be received against the same ASN.
- C. If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction.
- D. This error message will disappear if the RF screen parameter split-uom is left bank.
- E. The from-IBLPN and the to-IBLPN might be received against two different ASNs respectively.
Answer: A,B,D
NEW QUESTION 50
Which three interface validations cause the Advance Shipment Notifications (ASN) to fail when uploading to WMS Cloud? (Choose three.)
- A. ASN data is past the shipping date.
- B. ASN file has invalid data format.
- C. Purchase Detail line and ASN Detail line do not match in WMS Cloud.
- D. A Purchase Order that is referenced on the ASN doesn't exist in WMS Cloud.
- E. ASN Qty and Purchase Qty do not match in WMS Cloud.
Answer: B,C,E
NEW QUESTION 51
Your warehouse is divided into two large areas, Area A and Area B, which store different products. You have set up your wave to allocate inventory from only Area A, but when the wave is run, both Area A and area B have allocated items.
What caused the issue?
- A. In the Allocation Mode, "Restrict Allocation Zone" was not specified.
- B. Allocation zone was not specified in the task selection criteria.
- C. The locations in Area A have excessive cycle count tasks against them.
- D. Allocation zone was not specified in the shipping order.
- E. In the Allocation Mode, "Restrict Allocation Zone" was set to Area B.
Answer: B
NEW QUESTION 52
Identify the type of functions you need to use to handle conditional information in a report.
- A. WMS BI Cloud does not support that type of functionality
- B. String Functions
- C. Dynamic Functions
- D. Arithmetic and Geometric Functions
- E. Logical Functions
Answer: E
NEW QUESTION 53
Which five combinations of lot and expiry date are valid scenarios in WMS Cloud? (Choose five.)
- A. Two IB LPNs of the same item have different lots and different expiry dates.
- B. An item is lot-tracked but not expiry-date-tracked.
- C. Two IB LPNs of the same item have the same lot and the same expiry date.
- D. Two IB LPNs of the same item have different lots and the same expiry dates.
- E. The IB LPNs have an item with the same lot and different expiry dates.
- F. An item is expiry-date-tracked but not lot-tracked.
Answer: A,B,C,E,F
NEW QUESTION 54
Your client finds it easier to read reports without repeated values. The client shared an example report to demonstrate the way they want their columns to be displayed.
What action should you take to make your report look like the example report provided by client?
Report A:
- A. Select the Hide Repeated Values icon.
- B. Select the Suppress Duplicate Values icon.
- C. Select Chart Wizard, and delete repeated values.
- D. Select the Hid Common Values icon.
Answer: B
NEW QUESTION 55
You are using the WMS Cloud at the Stores as well as the DC. Your workflow at that Store requires that you quickly pick orders for the customer when they arrive.
Which configuration allows you to achieve this workflow requirement?
- A. Create an Order Type with the flag "Allocate during Pick" enabled so that you can pick orders at the store without waving.
- B. Set the Order Type to "Pick Without Wave". This allows the RF options to automatically pick up those order and display to pickers.
- C. Change the Order Type to "Rush" and wave it because the customer is waiting.
- D. Create a wave template with Wave Template Type "Store", then wave will allocate orders in a FiFO
- E. Create a Flow Through process and configure each customer's address as a "Designation Location"
Answer: A
NEW QUESTION 56
You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch.
Which three are valid? (Choose three.)
- A. The from-IBLPN and the to-IBLPN might be received against two different ASNs respectively.
- B. If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction.
- C. The from-IBLPN and the to-IBLPN might be received against the same ASN.
- D. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.
- E. This error message will disappear if the RF screen parameter split-uom is left bank.
Answer: A,B,D
NEW QUESTION 57
......
Give push to your success with 1z0-1045-22 exam questions: https://www.certkingdompdf.com/1z0-1045-22-latest-certkingdom-dumps.html