[Jul 15, 2024] New SolarWinds Hybrid-Cloud-Observability-Network-Monitoring Dumps with Test Engine and PDF (New Questions)
Pass Your Hybrid-Cloud-Observability-Network-Monitoring Exam Easily - Real Hybrid-Cloud-Observability-Network-Monitoring Practice Dump Updated
NEW QUESTION # 73
A problem occurred on the main polling engine and the server fails. It is noted that statistics for the networking devices polled by a universal device poller (UDP) custom monitor are missing. Which two of the following reasons are possible causes of this event? (Choose two.)
- A. UDPs do not collect data from failover or hot standby engines
- B. UDPs are tied to the polling engine on which they are hosted
- C. data collection for any UDPs stops on the server
- D. networking devices are not assigned to the UDP
Answer: B,C
NEW QUESTION # 74
Upon logging into the web console to check node statuses, it is noted that several nodes display a "down" status when they are up and running. Which two of the following situations are the likely causes of this issue?
(Choose two.)
- A. ICMP blocked from polling engine to target node
- B. nodes usingincorrect SNMP credentials
- C. nodestatus must be set to au management
- D. polling interval set to value other than default
Answer: A,B
NEW QUESTION # 75
A node has been added to hybrid cloud observability and shows an "unknown" status until the data is polled.
The default interval for polling status is two minutes.
If the node stays in the "unknown" status longer than the polling interval, which three of the following steps can be performed to resolve the issue? (Choose three.)
- A. Ping device from assigned polling engine.
- B. Verify the appropriate polling method is set for this node.
- C. Run SNMP walk on the appropriate node.
- D. Verify a pingresponsefor this node is received through the ICMP.
Answer: A,B,D
NEW QUESTION # 76
Which three of the following steps should be taken to troubleshoot a 'test failed' result for SNMP nodes in hybrid cloud observability? (Choose three.)
- A. Verify the SNMP service on the node has been restarted after changing the community string.
- B. Add remote site node and confirm firewall rules are configured to allow SNMP traffic.
- C. Verify the node can be pinged from the application server.
- D. Confirm the use ofSNMPv3 with authentication keys.
Answer: A,B,C
NEW QUESTION # 77
A NetPath probe is to be built to monitor the paths between two sites. No Windows servers are available to run the agent. Which two of the following options can be used to set up the probe? (Choose two.)
- A. Install the agent on a red hat Linux server.
- B. Run the probe from the hybrid cloud observability (HCO) server.
- C. Install the agent on a Windows 10 computer.
- D. Use the network device agent to run the probe from the router.
Answer: B,C
NEW QUESTION # 78
Which custom filter allows a user to view specific statistics about an entire network and its devices without having to navigate through the web console by single-device views?
- A. flow navigator
- B. NBAR2
- C. top 10 applications
- D. flow alert
Answer: A
NEW QUESTION # 79
Which two of the following technologies does device studio support? (Choose two.)
- A. node details
- B. throughput
- C. |multi-CPU and memory
- D. baseline and thresholds
Answer: A,C
NEW QUESTION # 80
If an SNMP community string is changed on a device, which two of the following steps are required to re-establish successful polling on the node? (Choose two.)
- A. Delete and add the node back into the platform.
- B. Update the community string in node properties.
- C. Edit the node properties and save the changes.
- D. Restart the SNMP service on the source device.
Answer: B,C
NEW QUESTION # 81
A "no data" message is displayed in NetFlow charts. How can this be resolved?
- A. Confirm account has viewing permissions.
- B. Shorten the time for view and resource.
- C. Restart collector service.
- D. Refresh the current window.
Answer: A
NEW QUESTION # 82
If a NetFlow collector service is showing a "down" status, which two of the following steps are possible troubleshooting options? (Choose two.)
- A. Confirm the database connection is up and server has free resources.
- B. Start or restart SolarWinds' NetFlow service from Orion service manager.
- C. Start or restart SolarWinds' collector service.
- D. Delete and re-add NetFlow collector service.
Answer: A,B
NEW QUESTION # 83
A device studio poller is being built for node detail information. For the values supported, it has been decided to enter textual values instead of object IDs (OIDs). Which statements is true?
- A. If the textual value changes on the node, the poller must be manually updated.
- B. If the textual value changes, it will update automatically.
- C. Only textual values can be used for host names, all other values must be OlDs.
- D. If the textual value is misspelled, it will not poll correctly.
Answer: A
NEW QUESTION # 84
The unclassified traffic in the web console has been identified as MSSQL traffic. It is known as an application mapping that hybrid cloud observability maps by default. Which two of the following reasons explain why the traffic is showing as unclassified? (Choose two.)
- A. A different port is being used.
- B. The version of MSSQL being used is not supported.
- C. The source or the destination port field is not present.
- D. A firewall is blocking the traffic.
Answer: A,C
NEW QUESTION # 85
Which custom poller supports interface traffic, UPS battery status, and CPU temperature?
- A. visualization integration
- B. device studio
- C. universal device poller
- D. hardware health
Answer: C
NEW QUESTION # 86
Which statement related to flow alerts is true?
- A. can be triggered even when NetFlow service is down
- B. based on custom SQL query
- C. have no trigger actions
- D. object of the alert selected from create a flow alert panel
Answer: B
NEW QUESTION # 87
Which port needs to be open in order to analyze flow and monitor CBQoS?
- A. Flow (UDP, 2055), CBQoS (SNMP, 161)
- B. Flow (SNMP, 161), CBQoS (TCP, 2055)
- C. Flow (SNMP, 161), CBQoS (UDP, 2055)
- D. Flow (TCP, 2055), CBQoS (SNMP, 161)
Answer: A
NEW QUESTION # 88
If an IP address group is hidden in IP address groups management, what impact will it have on the data?
- A. group will be shown in compliance reports
- B. groupwill not be shown in IPAM
- C. group will not be shown in charts or reports
- D. group historical data will be deleted
Answer: C
NEW QUESTION # 89
Which tool presents live flow traffic data sourced from / to a main polling engine server, providing basic insight into traffic on the main polling engine?
- A. CBQoS/flow sources
- B. collector service
- C. flow navigator
- D. local NetFlow source
Answer: D
NEW QUESTION # 90
It is taking longer than normal for a single mission critical node to poll for data. Where would the polling interval for the node be changed?
- A. Settings > All Settings > Polling Settings
- B. Node Details Summary > Resources > Memory
- C. Settings > All Setting > Core Thresholds
- D. Node Details Summary > Edit Node > Polling
Answer: D
NEW QUESTION # 91
Which two of the following requirements are needed to monitor an application on a server? (Choose two.)
- A. Add application and ports using server as source and destination IP addresses.
- B. Click the monitor recommendation applications button.
- C. Add the IP address of the server into an IP address group.
- D. Find the application to monitor in the list of available applications and enable it.
Answer: A,D
NEW QUESTION # 92
In which two of the following cases does duplicate flow data occur? (Choose two.)
- A. both IP flow ingress and egress applied for all interfaces
- B. both IP flow ingress and egress applied on one interface
- C. IP flow ingress on some interfaces and egress on others
- D. IP flow ingress applied on all interfaces, no egress usage
Answer: A,B
NEW QUESTION # 93
Which status rollup mode displays groups defined as collections of redundant or backup devices?
- A. show worst
- B. show best
- C. show mixed
- D. showzero
Answer: B
NEW QUESTION # 94
Which three of the following data points does NetFlow use to confirm traffic is in the same flow? (Choose three.)
- A. interface name
- B. L3 protocol
- C. port number
- D. IP address
Answer: B,C,D
NEW QUESTION # 95
......
CertkingdomPDF just published the SolarWinds Hybrid-Cloud-Observability-Network-Monitoring exam dumps!: https://www.certkingdompdf.com/Hybrid-Cloud-Observability-Network-Monitoring-latest-certkingdom-dumps.html