Full VCS-278 Practice Test and 220 unique questions with explanations waiting just for you!
Veritas NetBackup Dumps VCS-278 Exam for Full Questions - Exam Study Guide
NEW QUESTION 91
An administrator is attempting to start Netbackup services on a master server success. When verifying the database is up using the nbdb_ping command, the administrator receives the following error:
Database (NBDB) is not available
Which log file should the administrator analyze to determine why Netbackup Database fails to start?
- A. mm.log
- B. server.log
- C. Nbdbms.log
- D. Nbdb.log
Answer: B
Explanation:
Explanation
https://www.veritas.com/support/en_US/article.100029920
NEW QUESTION 92
What happens if the "Maximum data streams" property is enabled in the General tab of Client Attributes for a particular client?
- A. NetBackup ignores "Maximum jobs per client" and uses either "Maximum data streams" or "Limit jobs per policy", whichever is lowest.
- B. NetBackup ignores "Limit jobs per policy" and uses either "Maximum data streams" or "Maximum jobs per client", whichever is lowest.
- C. NetBackup ignores "Maximum concurrent jobs" per storage unit and uses either "Limit jobs per policy" or
"Maximum data streams", whichever is lowest. - D. NetBackup ignores "Maximum concurrent jobs" per storage unit and uses "Maximum jobs per client" or the
"Limit jobs per policy", whichever is lowest.
Answer: A
NEW QUESTION 93
An administrator wishes to modify the Override default job priority option for on MS Windows type restore job before the restore job begins.
Where in the Microsoft Windows Backup, Archive, and Restore console can the administrator configure this option?
- A. within file > Specify Net Backup Machines and Policy type
- B. in the Backup, Archive, and Restore window, under the Restore Files tab
- C. after clicking the Restore button, in the Restore Marked Files dialog box
- D. at the bottom of the options listed in File > NetDackup Client Properties > Network
Answer: C
NEW QUESTION 94
Which command should an administrator use to show a list of incomplete copies of lifecycle managed images?
- A. nbstl
- B. bpimage
- C. nbstlutil
- D. bpimmedia
Answer: C
NEW QUESTION 95
What are the minimal policy directive(s) to ensure all components of a Windows server system are protected when performing a backup?
- A. ALL_LOCAL_DRIVES and Shadow Copy Components:\
- B. ALL_LOCAL_DRIVES and System State:\
- C. ALL_LOCAL_DRIVES and System State:\ and Shadow Copy Components:\
- D. ALL_LOCAL_DRIVES
Answer: D
NEW QUESTION 96
Which configuration file should an administrator modify to seed the local fingerprint caching configuration on a NetBackup MSDP client?
- A. pd.conf
- B. contentrouter.cfg
- C. spa.cfg
- D. agent.cfg
Answer: A
NEW QUESTION 97
An administrator creates a Storage Lifecycle Policy (SLP) to take advantage of optimized duplication. The backup and subsequent duplication jobs launch as configured in the SLP.
What may cause the secondary duplication job to run as non-optimized?
- A. Optimized duplication requires the media servers to be configured as Fibre Transport media servers.
- B. Both source and destination storage servers have only one media server in common.
- C. Both compression and encryption attributes are disabled in the backup policy.
- D. Optimized duplication is unsupported when a storage unit group is the target of the duplication.
Answer: A
NEW QUESTION 98
Which command should an administrator use to show a list of incomplete copies of lifecycle managed images?
- A. nbstl
- B. bpimage
- C. nbstlutil
- D. bpimmedia
Answer: C
Explanation:
Explanation/Reference: https://www.veritas.com/content/support/en_US/article.100006475
NEW QUESTION 99
What are two ways to include files for scheduled backups? (Choose two.)
- A. Use Client Properties > Windows client > Exclude list Exceptions.
- B. Specify files using the Backup, Archive, and Restore interface.
- C. Specify files to be backed up in the policy backup selections.
- D. Use storage lifecycle policies to specify files to back up.
- E. Specify files to back up using Data Classifications.
Answer: A,C
NEW QUESTION 100
An administrator of a multi-site, multi-domain NetBackup environment wants to be able to provide redundancy for backups as well as protecting the NetBackup image database. All backups must have on-site and off-site copies in multiple NetBackup domains as well as off-site tape copies.
Which NetBackup feature should the administrator use to implement the functionality?
- A. Auto Image Replication
- B. Replication Director
- C. Optimized Duplication
- D. Vault with Catalog Backups
Answer: A
NEW QUESTION 101
Which two options are determined by the Security Level? (Choose two.)
- A. if the CA fingerprint needs to be confirmed during an installation or upgrade
- B. if a host requires a token during installation
- C. whether insecure communication with NetBackup 8.0 and earlier hosts is allowed
- D. the idle log off timeout for the NetBackup Administration Console
- E. how often CRLs are updated
Answer: A,E
NEW QUESTION 102
Backups to a storage device fail with the following error message:
Disk storage is down (2106)
The storage server is an OpenStorage (OSI) host, and the Master Server and Media Server are both acting as Media Servers under Credentials > Storage Servers in the Administration Console. The disk pool is in an Up state and the storage server is in a Down state. Troubleshooting confirmed the OST plug-ins on the servers are mismatched.
Which command should an administrator use to check the plug in version installed on the servers?
- A. nbdovquery
- B. bpgetconfig
- C. nbemmcmd
- D. bpstsinfo
Answer: D
NEW QUESTION 103
What happens if the "Maximum data streams" property is enabled in the General tab of Client Attributes for a particular client?
- A. NetBackup ignores "Maximum concurrent jobs" per storage unit and uses "Maximum jobs per client" or the "Limit jobs per policy", whichever is lowest.
- B. NetBackup ignores "Maximum jobs per client" and uses either "Maximum data streams" or "Limit jobs per policy", whichever is lowest.
- C. NetBackup ignores "Limit jobs per policy" and uses either "Maximum data streams" or "Maximum jobs per client", whichever is lowest.
- D. NetBackup ignores "Maximum concurrent jobs" per storage unit and uses either "Limit jobs per policy" or "Maximum data streams", whichever is lowest.
Answer: B
NEW QUESTION 104
What is the certificate Authority (CA) for Netbackup?
- A. A media server
- B. An OpenCenter Server
- C. A master server
- D. An Appliance Management Server
Answer: C
Explanation:
Explanation
https://www.veritas.com/support/en_US/article.100043569
NEW QUESTION 105
Which method is NOT able to provide performance information for previously run backup jobs?
- A. Running nbperfehk on the command line
- B. Viewing the Disk tape Deice Activity report in the activity Monitor
- C. Running the All Log Entries report
- D. Viewing then detailed status of the job details in the Activity Monitor
Answer: A
NEW QUESTION 106
What is the certificate deployment and management behavior when the security level is set to High?
- A. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
- B. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every hour.
- C. Certificates are deployed with a token for all hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
- D. Certificates are deployed automatically for all hosts and the Certificate Revocation List (CRL) is refreshed every hour.
Answer: A
NEW QUESTION 107
An administrator performing a backup and receives the following error message:
129 Message: Disk storage unit is full.
Which NetBackup command should the administrator use to report the potential space of advancedDisk storage units?
- A. Nbdevquery
- B. Nbdiscover
- C. bpdbclm
- D. Nbemmcmd
Answer: A
NEW QUESTION 108
An administrator needs to back up Windows and Linux file servers to an Advanced Disk storage unit targeting a high speed disk array. Backup traffic shares a busy network with mission critical application traffic.
Which feature can the administrator implement to optimize this backup environment?
- A. client-side deduplication
- B. NetBackup Accelerator
- C. network resiliency
- D. Synthetic backups
Answer: D
Explanation:
Explanation/Reference: https://searchdatabackup.techtarget.com/feature/Full-incremental-or-differential-How-to-choose- the-correct-backup-type
NEW QUESTION 109
What is a logical destination for NetBackup client's backup data?
- A. Selection List
- B. Storage Unit
- C. Catalog
- D. Policy
Answer: B
Explanation:
Explanation
The logical destinations for a NetBackup client's data include storage units, storage unit groups, and SLP.
NEW QUESTION 110
To which VMware component does the backup host require direct access for SAN backups?
- A. VMware tools
- B. Datastore
- C. vStorage API
- D. vCenter server
Answer: B
Explanation:
The datastore contains virtual machine data for the ESXi Servers.
NEW QUESTION 111
Prior to initiating a restore, an administrator realizes that media needed for the restore was written by a server that is unavailable. The administrator does have another server that can perform the restore and that is connected to the same library.
Which two commands can the administrator perform to change the server ownership, so the restore can be performed? (Choose two.)
- A. bpimport
- B. bpimagelist
- C. bpimmedia
- D. bpimage
- E. bpmedia
Answer: D,E
NEW QUESTION 112
......
Authentic Best resources for VCS-278 Online Practice Exam: https://www.certkingdompdf.com/VCS-278-latest-certkingdom-dumps.html