Dependable 300-715 Exam Dumps to Become Cisco Certified
Get Ready with 300-715 Exam Dumps (2022)
Once you have completed the session, you will be prepared to sit and pass 300-715 exam. Here are some of the course objectives:
- Show how you can use Cisco ISE policies to comply with the requirements of your company;
- Gaining an understanding of the deployment of Cisco ISE, its advantages, and how each of the different components takes part in these benefits;
- Show an understanding of BYOD issues, solutions, procedures, and platforms.
- Demonstrate knowledge of Network Access Devices (NADs), TrustSec of Cisco, Easy Connect, and how you can use them at work;
- Understand and demonstrate the use of components associated with 802.1X & MAC Authentication Bypass (MAB) authentication;
Prior to registering, there are vital requirements to meet. They include the awareness of Cisco IOS Software CLI, 802.1X, Microsoft Windows OS, and more. The benefits of studying with this course for exam 300-715 include building skills and qualification for highly-demanded job roles. Plus, completion of this training also comes with 40 CE credits, which will be considered when recertifying.
NEW QUESTION 74
An adminístrator is migrating device administration access to Cisco ISE from the legacy TACACS+ solution that used only privilege 1 and 15 access levels. The organization requires more granular controls of the privileges and wants to customize access levels 2-5 to correspond with different roles and access needs. Besides defining a new shell profile in Cisco ISE. what must be done to accomplish this configuration?
- A. Enable the privilege levels in the IOS devices.
- B. Enable the privilege levels in Cisco ISE
- C. Define the command privileges for levels 2-5 in the IOS devices
- D. Define the command privileges for levels 2-5 in Cisco ISE
Answer: A
Explanation:
https://learningnetwork.cisco.com/s/blogs/a0D3i000002eeWTEAY/cisco-ios-privilege-levels
NEW QUESTION 75
Which two ports do network devices typically use for CoA? (Choose two )
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: C,D
Explanation:
Explanation
NEW QUESTION 76
Which Cisco ISE service allows an engineer to check the compliance of endpoints before connecting to the network?
- A. nexpose
- B. posture
- C. personas
- D. qualys
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010110.html Posture is a service in Cisco Identity Services Engine (Cisco ISE) that allows you to check the state, also known as posture, of all the endpoints that are connecting to a network for compliance with corporate security policies. This allows you to control clients to access protected areas of a network.
NEW QUESTION 77
Client provisioning resources can be added into the Cisco ISE Administration node from which three of these? (Choose three.)
- A. Posture Agent Profile
- B. www-cisco.com
- C. FTP
- D. local disk
- E. TFTP
Answer: A,B,D
NEW QUESTION 78
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION 79
What are two requirements of generating a single signing in Cisco ISE by using a certificate provisioning portal, without generating a certificate request? (Choose two )
- A. Enter the common name
- B. Location the CSV file for the device MAC
- C. Select the certificate template
- D. Enter the IP address of the device
- E. Choose the hashing method
Answer: A,C
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200534-ISE-2-0- Certificate-Provisioning-Portal.html
NEW QUESTION 80
Refer to the exhibit.
An engineer is configuring Cisco ISE for guest services They would like to have any unregistered guests redirected to the guest portal for authentication then have a CoA provide them with full access to the network that is segmented via firewalls Why is the given configuration failing to accomplish this goal?
- A. The Permit Access result is not set to restricted access in its policy line
- B. The Guest Portal and Guest Access policy lines are in the wrong order
- C. The Network_Access_Authentication_Passed condition will not work with guest services for portal access.
- D. The Guest Flow condition is not in the line that gives access to the quest portal
Answer: B
NEW QUESTION 81
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
NEW QUESTION 82
An administrator is attempting to replace the built-in self-signed certificates on a Cisco ISE appliance. The CA is requesting some information about the appliance in order to sign the new certificate. What must be done in order to provide the CA this information?
- A. Download the CA server certificate.
- B. Generate the CSR.
- C. Install the Root CA and intermediate CA.
- D. Download the intermediate server certificate.
Answer: C
NEW QUESTION 83
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
NEW QUESTION 84
An engineer is designing a new distributed deployment for Cisco ISE in the network and is considering failover options for the admin nodes. There is a need to ensure that an admin node is available for configuration of policies at all times. What is the requirement to enable this feature?
- A. one primary admin and one secondary admin node in the deployment
- B. one policy services node and one secondary admin node
- C. one primary admin node and one monitoring and troubleshooting node
- D. one policy services node and one monitoring and troubleshooting node
Answer: A
NEW QUESTION 85
Which advanced option within a WLAN must be enabled to trigger Central Web Authentication for Wireless users on AireOS controller?
- A. override Interface ACL
- B. static IP tunneling
- C. AAA override
- D. DHCP server
Answer: C
Explanation:
Section: Web Auth and Guest Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/ b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010110111.html
NEW QUESTION 86
An engineer is configuring web authentication using non-standard ports and needs the switch to redirect traffic to the correct port.
Which command should be used to accomplish this task?
- A. permit tcp any any eq <port number>
- B. aaa group server radius proxy
- C. ip http port <port number>
- D. aaa group server radius
Answer: C
Explanation:
Section: Web Auth and Guest Services
NEW QUESTION 87
Which two fields are available when creating an endpoint on the context visibility page of Cisco IS? (Choose two )
- A. Endpoint Family
- B. Identity Group Assignment
- C. IP Address
- D. Policy Assignment
- E. Security Group Tag
Answer: B,D
NEW QUESTION 88
Refer to the exhibit:
Which command is typed within the CLI of a switch to view the troubleshooting output?
- A. show authentication registrations
- B. show authentication interface gigabitethemet2/0/36
- C. show authentication sessions mac 000e.84af.59af details
- D. show authentication sessions method
Answer: C
NEW QUESTION 89
An administrator is configuring cisco ISE lo authenticate users logging into network devices using TACACS+ The administrator is not seeing any or the authentication in the TACACS+ live logs. Which action ensures the users are able to log into the network devices?
- A. Enable the device administration service in the PSN persona.
- B. Enable the session services in the administration persona
- C. Enable the device administration service in the Administration persona
- D. Enable the service sessions in the PSN persona.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ISE_admin_guide_24/m_ise_tacacs_device_admin.html
NEW QUESTION 90
What sends the redirect ACL that is configured in the authorization profile back to the Cisco WLC?
- A. Event
- B. Class attribute
- C. State attribute
- D. Cisco-av-pair
Answer: D
Explanation:
Section: Profiler
Explanation/Reference: https://community.cisco.com/t5/network-access-control/ise-airespace-acl-wlc-problem/td- p/2110491
NEW QUESTION 91
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profiling service so that a user can reliably bind the IP addresses and MAC addresses of endpoints? (Choose two.)
- A. NetFlow
- B. RADIUS
- C. DHCP
- D. HTTP
- E. SNMP
Answer: B,C
Explanation:
Section: Profiler
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/ b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION 92
An organization is implementing Cisco ISE posture services and must ensure that a host-based firewall is in place on every Windows and Mac computer that attempts to access the network They have multiple vendors' firewall applications for their devices, so the engineers creating the policies are unable to use a specific application check in order to validate the posture for this What should be done to enable this type of posture check?
- A. Enable the default firewall condition to check for any vendor firewall application.
- B. Enable the default application condition to identify the applications installed and validade the firewall app.
- C. Use the file registry condition to ensure that the firewal is installed and running appropriately.
- D. Use a compound condition to look for the Windows or Mac native firewall applications.
Answer: A
Explanation:
https://www.youtube.com/watch?v=6Kj8P8Hn7dY&t=109s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION 93
Refer to the exhibit:
Which command is typed within the CU of a switch to view the troubleshooting output?
- A. show authentication registrations
- B. show authentication interface gigabitethemet2/0/36
- C. show authentication sessions mac 000e.84af.59af details
- D. show authentication sessions method
Answer: C
NEW QUESTION 94
Which two task types are included in the Cisco ISE common tasks support for TACACS+ profiles?
(Choose two.)
- A. WLC
- B. ASA
- C. Shell
- D. IOS
- E. Firepower
Answer: A,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_0100010.html TACACS+ Profile TACACS+ profiles control the initial login session of the device administrator. A session refers to each individual authentication, authorization, or accounting request. A session authorization request to a network device elicits an ISE response. The response includes a token that is interpreted by the network device, which limits the commands that may be executed for the duration of a session. The authorization policy for a device administration access service can contain a single shell profile and multiple command sets. The TACACS+ profile definitions are split into two components:
Common tasks
Custom attributes
There are two views in the TACACS+ Profiles page (Work Centers > Device Administration > Policy Elements > Results > TACACS Profiles)-Task Attribute View and Raw View. Common tasks can be entered using the Task Attribute View and custom attributes can be created in the Task Attribute View as well as the Raw View.
The Common Tasks section allows you to select and configure the frequently used attributes for a profile. The attributes that are included here are those defined by the TACACS+ protocol draft specifications. However, the values can be used in the authorization of requests from other services. In the Task Attribute View, the ISE administrator can set the privileges that will be assigned to the device administrator. The common task types are:
Shell
WLC
Nexus
Generic
The Custom Attributes section allows you to configure additional attributes. It provides a list of attributes that are not recognized by the Common Tasks section. Each definition consists of the attribute name, an indication of whether the attribute is mandatory or optional, and the value for the attribute. In the Raw View, you can enter the mandatory attributes using a equal to (=) sign between the attribute name and its value and optional attributes are entered using an asterisk (*) between the attribute name and its value. The attributes entered in the Raw View are reflected in the Custom Attributes section in the Task Attribute View and vice versa. The Raw View is also used to copy paste the attribute list (for example, another product's attribute list) from the clipboard onto ISE. Custom attributes can be defined for nonshell services.
NEW QUESTION 95
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION 96
......
Training Course for Cisco 300-715 Test
As it was stated above, to train and prepare for exam 300-715, you might need to enroll in the official prep course. The Implementing and Configuring Cisco ISE (SISE v3.0) training is the most appropriate to take up this specific exam. It will empower you to deploy and utilize the Cisco ISE v2.4, which is a platform for control policy used for wireless, VPN connections, and wired. Under this class, you will cover all the seven domains that are tested in 300-715. Then, the course offers you guidance from experts and lab practicals on the skills and concepts you need to pass the official exam. You will also understand how you can use Cisco ISE to identify the activities in the network, how to activate the management of policies, and how to make your operations more efficient. This course will take an equivalent of 5 days depending on the option you choose from the following:
- Another 5 days of e-learning with videos, challenges, and practice.
- 5 days of instructor-guided classroom learning with lab practice;
- A 5-day virtual instructor class sessions on the web with hands-on practice;
How to schedule Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)
- Follow the prompts to register
- Log into your account at Pearson VUE
- Select Proctored Exams and enter the exam number 300-715
Download Exam 300-715 Practice Test Questions with 100% Verified Answers: https://www.certkingdompdf.com/300-715-latest-certkingdom-dumps.html
Realistic 300-715 Dumps are Available for Instant Access: https://drive.google.com/open?id=1C0LmS8hcpeXI5HRMT-FB6Je8rsEByP52