[Dec-2023] Get 100% Real NS0-183 Free Online Practice Test
BEST Verified Network Appliance NS0-183 Exam Questions (2023)
Network Appliance NS0-183 exam is a challenging and comprehensive exam that covers a wide range of topics related to NetApp storage installation and configuration. NS0-183 exam consists of 60 multiple-choice questions and is designed to test the candidate's knowledge of the ONTAP storage architecture, installation, and configuration, including data protection, high availability, and performance optimization. NS0-183 exam is designed to be taken by IT professionals who have experience with NetApp storage solutions.
The NS0-183 certification exam is a valuable credential for IT professionals who work with NetApp storage systems. NetApp Storage Installation Engineer, ONTAP certification demonstrates to employers and clients that the candidate has the knowledge and skills to install, configure, and manage NetApp storage systems effectively. NetApp Storage Installation Engineer, ONTAP certification can also lead to career advancement opportunities, higher pay, and increased job security.
Network Appliance NS0-183 exam is designed for individuals who want to validate their skills and knowledge in NetApp storage installation. NS0-183 exam is aimed at storage installation engineers who work with ONTAP software. The NS0-183 exam is an industry-recognized certification that demonstrates a candidate’s expertise in implementing NetApp storage solutions.
NEW QUESTION # 14
What should you do to change the data protocol of a LIF?
- A. Put the LIF in another broadcast domain.
- B. Delete and re-recreate the LIF.
- C. Shut down the assigned port.
- D. Add the new data protocol to the LIF.
Answer: B
NEW QUESTION # 15
After completing the installation of a DS224C shelf, you observe the error shown in the exhibit.
Which action should you take to troubleshoot the error? (Choose two.)
- A. Reconnect the SAS cable.
- B. Perform a takeover-giveback.
- C. Re-seat the SAS card.
- D. Re-seat the IOM module.
Answer: A,D
NEW QUESTION # 16
You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches.
In this scenario. Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)
- A. network interface show -vserver Cluster -fields auto-revert
- B. network device-discovery show -protocol cdp
- C. network interface show -vserver Cluster
- D. network port show -ipspace Cluster
Answer: C,D
NEW QUESTION # 17
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster?
(Choose two.)
- A. thin provisioning
- B. FlexClone volumes
- C. FlashCache
- D. Flash Pool
Answer: C,D
NEW QUESTION # 18
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. Enable ALUA between the two HA pairs to allow cluster backend traffic.
- B. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
- C. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
- D. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
Answer: C
NEW QUESTION # 19
You are installing a new ONTAP 9.7 cluster by following the installation and setup poster. You are ready to complete the initial cluster setup. You have connected your laptop to the management switch. However, when browsing the network, you are unable to discover the ONTAP controllers.
Which statement explains this behavior?
- A. You do not have a static IP address.
- B. You do not have network discovery enabled.
- C. You do not have IPv6 configuration set.
- D. You do not have a default gateway set.
Answer: D
NEW QUESTION # 20
You were asked to install a FAS9000 with two quad-port SAS PCI cards. The SAS PCI cards are installed in slot 9 and slot 1. In preparation for the installation, you are filling out the SAS cabling worksheet. In this scenario, which ports are used for the second stack?
- A. 9b/1b
- B. 9a/1a
- C. 9c/1a
- D. 9a/1d
Answer: D
NEW QUESTION # 21
While preparing for a new ONTAP installation, you discover an issue with the controllers that are running ONTAP 9.5. The issue is not affecting controllers that are running ONTAP 9.4 with the latest patch version. In this scenario, which two steps should you perform to solve the problem? (Choose two.)
- A. Review the issue with the customer's deployment to see if it would be affected.
- B. If the controllers are in a Product Support Bulletin with ONTAP 9.5, open a case and wait for support to provide a patch release.
- C. Download ONTAP 9.4 with the latest patch version and ONTAP 9.5 for an eventual rollback on the day of the installation.
- D. Inform your customer that they must always install the latest supported ONTAP release.
Answer: A,B,C
NEW QUESTION # 22
Click the Exhibit button.
You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?
- A. Swap node1:e8a and node2:e4a.
- B. Swap node1:e4a and node2:e4b.
- C. Swap node2:e4a and node2:e8a.
- D. Swap node1:e4a and node1:e8a.
Answer: C
NEW QUESTION # 23
Click the Exhibit button.
Your ONTAP cluster shows the cluster network errors that are shown in the event log. What is used by ONTAP software to log the errors that are shown in the exhibit?
- A. BGP
- B. AutoSupport
- C. EMS
- D. SNMP
Answer: C
NEW QUESTION # 24
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. client network
- B. private network
- C. cluster LIFs
- D. management LIFs
Answer: B,C
NEW QUESTION # 25
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use ONTAP System Manager to download and install the new software image.
- B. Use ONTAP System Manager to upload and install the new software image.
- C. Use the cluster image package get and cluster image update commands.
- D. Use a USB drive with the new software image and let ONTAP automatically boot.
Answer: B,C
Explanation:
The software image is downloaded from NetApp Support Site. And it is uploaded to the nodes via System Manager.
NEW QUESTION # 26
A 4-node cluster has connectivity for both block and file access. Nodes 1 and 3 are used for file access, and nodes 2 and 4 are used for block access. During routine maintenance, node 4 is switched off and the LIFs are migrated to other nodes. Upon investigation, you see that the LIFs that serve file traffic have moved to alternative ports.
However, LIFs that serve the block have not migrated. In this scenario, what is happening?
- A. The failover group is configured incorrectly.
- B. There is a faulty SFP.
- C. The LIFs that serve the block protocol do not failover.
- D. The fiber switch is configured incorrectly.
Answer: C
NEW QUESTION # 27
While preparing for a new cluster installation, your customer indicates that they have some disk shelves and switches that were discontinued at their old site. They want to re-use as much of this equipment as possible. You must verify that their discontinued equipment is compatible with the new equipment they have on order.
Which two actions will accomplish this task? (Choose two.)
- A. Verify compatibility from Activity IQ.
- B. Use the Hardware Universe portal (HWU).
- C. Run the Cluster Configuration Builder tool (ConfigBuilder).
- D. look up the compatibility in the Interoperability Matrix Tool (IMT).
Answer: B,D
NEW QUESTION # 28
Node 3 has taken over Node 4. You are attempting to access Node 4 on its management interface but cannot do it. In this scenario, how would you access Node 4's management interface?
- A. Connect to the node management on Node 3 and then use the HA interconnect to access node 4.
- B. You must use the Service Processor; node management LIFS do not fall over between nodes.
- C. You should use SSH directly to one of the cluster interconnect switches; from there, you can use SSH to the node management on node 4.
- D. You have not waited long enough for the failover timeout for a node management LIF; there is a broadcast domain configured for this situation.
Answer: B
NEW QUESTION # 29
After properly cabling the NetApp CN1610 cluster switches, you see that joining the second node to a cluster fails because the node is not able to communicate with the other node.
In this scenario, what is causing this problem?
- A. The cluster switches must be Cisco for more than two nodes in a cluster.
- B. CN1610 is unsupported in newer ONTAP versions.
- C. The RCF file is not loaded properly.
- D. The NTP server is not set.
Answer: C
NEW QUESTION # 30
According to NetApp best practices, how many NTP servers should you associate with an ONTAP cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 31
After setting up a new cluster, you run an AutoSupport message for a test.
Which two commands would you use to proof the functionality and settings of AutoSupport? (Choose two.)
- A. system node autosupport history show
- B. system node autosupport show
- C. system node autosupport show history
- D. system node autosupport option show
Answer: A,B
NEW QUESTION # 32
......
NS0-183 Exam Dumps, Practice Test Questions BUNDLE PACK: https://www.certkingdompdf.com/NS0-183-latest-certkingdom-dumps.html