Apr-2024 Realistic EX200 Exam Dumps with Accurate & Updated Questions
EX200 Exam Dumps - PDF Questions and Testing Engine
The Red Hat certification program is recognized globally and is highly respected in the IT industry. The RHCSA certification is considered a benchmark for system administrators and is a requirement for many job roles. Red Hat Certified System Administrator - RHCSA certification demonstrates a high level of expertise and competence in managing Red Hat Enterprise Linux systems.
The Red Hat EX200 certification is an essential certification for individuals who want to pursue a career in system administration. Red Hat Certified System Administrator - RHCSA certification demonstrates the candidate's expertise in the field of system administration, making them stand out from the crowd. Red Hat Certified System Administrator - RHCSA certification provides a competitive edge and is widely recognized and respected by employers worldwide. Red Hat Certified System Administrator - RHCSA certification exam can be taken at any Red Hat testing center or at authorized training centers, and individuals can prepare for the exam by taking the Red Hat System Administration I and II courses or by self-study.
NEW QUESTION # 23
Configure a task: plan to run echo hello command at 14:23 every day.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# which echo
# crontab -e
23 14 * * * /bin/echo hello
# crontab -l (Verify)
NEW QUESTION # 24
SIMULATION
Make on /archive directory that only the user owner and group owner member can fully access.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
chmod 770 /archive
Verify using : ls -ld /archive Preview should be like:
drwxrwx--- 2 root sysuser 4096 Mar 16 18:08 /archive
To change the permission on directory we use the chmod command. According to the question that only the owner user (root) and group member (sysuser) can fully access the directory so: chmod 770 /archive
NEW QUESTION # 25
Your System is going to use as a Router for two networks. One Network is 192.168.0.0/24 and Another Network is 192.168.1.0/24. Both network's IP address has assigned. How will you forward the packets from one network to another network?
Answer:
Explanation:
see explanation below.
Explanation
* echo "1" >/proc/sys/net/ipv4/ip_forward
* vi /etc/sysctl.conf
net.ipv4.ip_forward = 1
If you want to use the Linux System as a Router to make communication between different networks, you need enable the IP forwarding. To enable on running session just set value 1 to
/proc/sys/net/ipv4/ip_forward. As well as automatically turn on the IP forwarding features on next boot set on
/etc/sysctl.conf file.
NEW QUESTION # 26
Who ever creates the files/directories on archive group owner should be automatically should be the same group owner of archive.
Answer:
Explanation:
see explanation below.
Explanation
* chmod g+s /archive
* Verify using: ls -ld /archive Permission should be like:
drwxrws--- 2 root sysuser 4096 Mar 16 18:08 /archive
If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory.
To set the SGID bit: chmod g+s directory
To Remove the SGID bit: chmod g-s directory
NEW QUESTION # 27
Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.
Answer:
Explanation:
# fdisk /dev/sda
p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and the extended partition is further divided into logical partitions) Enter
+2G t
8 I
82
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)
NEW QUESTION # 28
Part 1 (on Node1 Server)
Task 10 [Configuring NTP/Time Synchronization]
Configure your system so that it is an NTP client of utility.domain15.example.com The system time should be set to your (or nearest to you) timezone and ensure NTP sync is configured
Answer:
Explanation:
* [root@node1 ~]# yum install chrony
[root@node1 ~]# vim /etc/chrony.conf
pool utility.domain15.example.com iburst
[root@node1 ~]# systemctl enable chronyd
[root@node1 ~]# systemctl restart chronyd
[root@node1 ~]# systemctl status chronyd
[root@node1 ~]# tzselect
Please identify a location so that time zone rules can be set correctly.
Please select a continent, ocean, "coord", or "TZ".
1) Africa
2) Americas
3) Antarctica
4) Asia
11) TZ - I want to specify the time zone using the Posix TZ format.
#? 4
* Please select a country whose clocks agree with yours.
1) Afghanistan 18) Israel 35) Palestine
2) Armenia 19) Japan 36) Philippines
3) Azerbaijan 20) Jordan 37) Qatar
4) Bahrain 21) Kazakhstan 38) Russia
5) Bangladesh 22) Korea (North) 39) Saudi Arabia
#? 5
The following information has been given:
Bangladesh
Therefore TZ='Asia/Dhaka' will be used.
Is the above information OK?
1) Yes
2) No
#? 1
Asia/Dhaka
[root@node1 ~]# chronyc sources -v
^? utility.domain15.example> 0 7 0 - +0ns[ +0ns] +/- 0ns
NEW QUESTION # 29
Adjust the size of the Logical Volume.
Adjust the size of the vo Logical Volume, its file system size should be 290M. Make sure that the content of this system is complete.
Note: the partition size is rarely accurate to the same size as required, so in the range 270M to 320M is acceptable.
Answer:
Explanation:
Addition
df -hT
lvextend -L +100M /dev/vg0/vo
Lvscan
xfs_growfs /home/ //home is the mounted directory of the LVM, this step just need to do in the practice environment, and test EXT4 does not need this step.
resize2fs /dev/vg0/vo// use this command to update in examination.
df -hT
OR
Subtraction
e2fsck -f/dev/vg0/vo
umount /home
resize2fs /dev/vg0/vo // the final required partition capacity is 100M lvreduce -l 100M /dev/vg0/vo mount /dev/vg0/vo/home df -hT
NEW QUESTION # 30
According the following requirements to create a local directory /common/admin.
* This directory has admin group.
* This directory has read, write and execute permissions for all admin group members.
* Other groups and users don't have any permissions.
* All the documents or directories created in the/common/admin are automatically inherit the admin group.
Answer:
Explanation:
see explanation below.
Explanation
mkdir -p /common/admin
chgrp admin /common/admin
chmod 2770 /common/admin
NEW QUESTION # 31
Create one partitions having size 100MB and mount it on data.
Answer:
Explanation:
see explanation below.
Explanation
1. Use fdisk /dev/hda to create new partition.
2. Type n For New partitions.
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
mke2fs -j /dev/hda? To create ext3 filesystem.
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
Verify by mounting on current Sessions also: mount /dev/hda? /data
NEW QUESTION # 32
Create a swap space, set the size is 600 MB, and make it be mounted automatically after rebooting the system (permanent mount).
Answer:
Explanation:
if=/dev/zero of=/swapfile bs=1M count=600 mkswap /swapfile
/etc/fstab:
/swapfile swap swap defaults 0 0 mount -a
NEW QUESTION # 33
Change the logical volume capacity named vo from 190M to 300M. and the size of the floating range should set between 280 and 320. (This logical volume has been mounted in advance.)
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# vgdisplay
(Check the capacity of vg, if the capacity is not enough, need to create pv , vgextend , lvextend)
# lvdisplay (Check lv)
# lvextend -L +110M /dev/vg2/lv2
# resize2fs /dev/vg2/lv2
mount -a
(Verify)
------------------------------------------------------------------------------- (Decrease lvm)
# umount /media
# fsck -f /dev/vg2/lv2
# resize2fs -f /dev/vg2/lv2 100M
# lvreduce -L 100M /dev/vg2/lv2
# mount -a
# lvdisplay (Verify)
OR
# e2fsck -f /dev/vg1/lvm02
# resize2fs -f /dev/vg1/lvm02
# mount /dev/vg1/lvm01 /mnt
# lvreduce -L 1G -n /dev/vg1/lvm02
# lvdisplay (Verify)
NEW QUESTION # 34
Part 2 (on Node2 Server)
Task 5 [Managing Logical Volumes]
Add an additional swap partition of 656 MiB to your system. The swap partition should automatically mount when your system boots Do not remove or otherwise alter any existing swap partition on your system
Answer:
Explanation:
* [root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdc 252:32 0 5G 0 disk
└─vdc1 252:33 0 4.1G 0 part
└─datavg-datalv 253:3 0 3.9G 0 lvm /data
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# swapon -s
Filename Type Size Used Priority
/dev/dm-1 partition 2097148 1548 -2
[root@node2 ~]# free -m
total used free shared buff/cache available
Mem: 1816 1078 104 13 633 573
Swap: 2047 1 2046
[root@node2 ~]# parted /dev/vdc print
Number Start End Size Type File system Flags
1 1049kB 4404MB 4403MB primary lvm
* [root@node2 ~]# parted /dev/vdc mkpart primary linux-swap 4404MiB 5060MiB
[root@node2 ~]# mkswap /dev/vdc2
Setting up swapspace version 1, size = 656 MiB (687861760 bytes)
no label, UUID=9faf818f-f070-4416-82b2-21a41988a9a7
[root@node2 ~]# swapon -s
Filename Type Size Used Priority
/dev/dm-1 partition 2097148 1804 -2
[root@node2 ~]# swapon /dev/vdc2
* [root@node2 ~]# swapon -s
Filename Type Size Used Priority
/dev/dm-1 partition 2097148 1804 -2
/dev/vdc2 partition 671740 0 -3
[root@node2 ~]# blkid
/dev/vdc2: UUID="9faf818f-f070-4416-82b2-21a41988a9a7" TYPE="swap" PARTUUID="0f22a35f-02"
[root@node2 ~]# vim /etc/fstab
UUID=9faf818f-f070-4416-82b2-21a41988a9a7 swap swap defaults 0 0
[root@node2 ~]# reboot
[root@node2 ~]# swapon -s
Filename Type Size Used Priority
/dev/dm-1 partition 2097148 1804 -2
/dev/vdc2 partition 671740 0 -3
NEW QUESTION # 35
Part 1 (on Node1 Server)
Task 14 [Managing SELinux Security]
You will configure a web server running on your system serving content using a non-standard port (82)
Answer:
Explanation:
* [root@node1 ~]# curl http://node1.domain15.example.com
curl: (7) Failed to connect to node1.domain15.example.com port 80: Connection refused
[root@node1 ~]# yum install httpd
[root@node1 ~]# systemctl enable --now httpd
Created symlink /etc/systemd/system/multi-user.target.wants/httpd.service → /usr/lib/systemd/system/httpd.service.
[root@node1 ~]# systemctl start httpd
[root@node1 ~]# systemctl status httpd
Status: "Running, listening on: port 80"
* [root@node1 ~]# wget http://node1.domain15.example.com
2021-03-23 13:27:28 ERROR 403: Forbidden.
[root@node1 ~]# semanage port -l | grep http
http_port_t tcp 80, 81, 443, 488, 8008, 8009, 8443, 9000
[root@node1 ~]# semanage port -a -t http_port_t -p tcp 82
[root@node1 ~]# semanage port -l | grep http
http_port_t tcp 82, 80, 81, 443, 488, 8008, 8009, 8443, 9000
[root@node1 ~]# firewall-cmd --zone=public --list-all
[root@node1 ~]# firewall-cmd --permanent --zone=public --add-port=82/tcp
[root@node1 ~]# firewall-cmd --reload
[root@node1 ~]# curl http://node1.domain15.example.com
OK
* root@node1 ~]# wget http://node1.domain15.example.com:82
Connection refused.
[root@node1 ~]# vim /etc/httpd/conf/httpd.conf
Listen 82
[root@node1 ~]# systemctl restart httpd
[root@node1 ~]# wget http://node1.domain15.example.com:82
2021-03-23 13:31:41 ERROR 403: Forbidden.
[root@node1 ~]# curl http://node1.domain15.example.com:82
OK
NEW QUESTION # 36
According the following requirements, configure autofs service and automatically mount to user's home directory in the ldap domain.
- Instructor.example.com (192.168.0.254) has shared /home/guests/ldapuserX home directory to your system by over NFS export, X is your hostname number.
- LdapuserX's home directory is exist in the instructor.example.com: /home/ guests/ldapuserX
- LdapuserX's home directory must be able to automatically mount to /home/ guests/ldapuserX in your system.
- Home directory have write permissions for the corresponding user.
However, you can log on to the ldapuser1 - ldapuser99 users after verification. But you can only get your corresponding ldapuser users. If your system's hostname is server1.example.com, you can only get ldapuser1's home directory.
Answer:
Explanation:
mkdir -p /home/guests
cat /etc/auto.master:
/home/guests /etc/auto.ldap
cat /etc/auto.ldap:
ldapuser1 -rw instructor.example.com:/home/guests/ldapuser1
automatically mount all the user's home directory #* -rw instructor.example.com:/home/guests/&
NEW QUESTION # 37
Create a backup
Create a backup file named /root/backup.tar.bz2, contains the content of /usr/local, tar must use bzip2 to compress.
Answer:
Explanation:
see explanation below.
Explanation
cd /usr/local
tar -jcvf /root/backup.tar.bz2
mkdir /test
tar -jxvf /root/backup.tar.bz2 -C /test// Decompression to check the content is the same as the /usr/loca after If the questions require to use gzip to compress. change -j to -z.
NEW QUESTION # 38
Make on /archive directory that only the user owner and group owner member can fully access.
Answer:
Explanation:
chmod 770 /archive
Verify using : ls -ld /archive Preview should be like:
drwxrwx--- 2 root sysuser 4096 Mar 16 18:08 /archive
To change the permission on directory we use the chmod command. According to the question that only the owner user (root) and group member (sysuser) can fully access the directory so: chmod 770 /archive
NEW QUESTION # 39
There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24 Network. One RHEL6 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server. How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
Explanation:
see explanation below.
Explanation
* vi /etc/sysconfig/network GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0 DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
* service network restart
Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254.
NEW QUESTION # 40
The system ldap.example.com provides an LDAP authentication service.
Your system should bind to this service as follows:
The base DN for the authentication service is dc=domain11, dc=example, dc=com LDAP is used to provide both account information and authentication information. The connection should be encrypted using the certificate at http://host.domain11.example.com/pub/domain11.crt When properly configured, ldapuserX should be able to log into your system, but will not have a home directory until you have completed the autofs requirement. Username: ldapuser11 Password: password
Answer:
Explanation:
system-config-authentication LDAP user DN=dc=domain11,dc=example,dc=com Server= host.domain11.example.com Certificate= http://host.domain11.example.com/pub/domain11.crt (enter url carefully, there maybe // or ..) LDAP password OK starting sssd su -ldapuser11 Display Bash prompt #exit
NEW QUESTION # 41
CORRECT TEXT
Create a volume group, and set 16M as a extends. And divided a volume group containing 50 extends on volume group lv, make it as ext4 file system, and mounted automatically under /mnt/data.
Answer:
Explanation:
# pvcreate /dev/sda7 /dev/sda8
# vgcreate -s 16M vg1 /dev/sda7 /dev/sda8
# lvcreate -l 50 -n lvm02
# mkfs.ext4 /dev/vg1/lvm02
# blkid /dev/vg1/lv1
# vim /etc/fstab
# mkdir -p /mnt/data
UUID=xxxxxxxx /mnt/data ext4 defaults 0 0
# vim /etc/fstab
# mount -a
# mount
(Verify)
NEW QUESTION # 42
CORRECT TEXT
Create a 512M partition, make it as ext4 file system, mounted automatically under /mnt/data and which take effect automatically at boot-start.
Answer:
Explanation:
# fdisk /dev/vda
n
+512M
w
# partprobe /dev/vda
# mkfs -t ext4 /dev/vda5
# mkdir -p /data
# vim /etc/fstab
/dev/vda5 /data ext4 defaults 0 0
# mount -a
NEW QUESTION # 43
Configure a task: plan to run echo "file" command at 14:23 every day.
Answer:
Explanation:
(a) Created as administrator
# crontab -u natasha -e
23 14 * * * /bin/echo "file"
(b)Created as natasha
# su - natasha
$ crontab -e
23 14 * * * /bin/echo "file"
NEW QUESTION # 44
SIMULATION
Binding to an external validation server.
System server.domain11.example.com provides a LDAP validation service, your system should bind to this service as required:
Base DN of validation service is dc=example,dc=com
LDAP is used for providing account information and validation information Connecting and using the certification of http://server.domain11.example.com/pub/EXAMPLE-CA-CERT to encrypt After the correct configuration, ldapuser1 can log into your system, it does not have HOME directory until you finish autofs questions, ldapuser1 password is password.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: yum -y install sssd authconfig-gtk krb5-workstation authconfig-gtk // open the graphical interface Modify user account database to ldap, fill up DN and LDAP SERVER as questions required, use TLS to encrypt connections making tick, write http://server.domain11.example.com/pub/EXAMPLE-CA-CERT to download ca, authentication method choose ldap password.
You can test if the ldapuser is added by the following command:
Id ldapuser1
Note: user password doesn't not need to set
NEW QUESTION # 45
Part 1 (on Node1 Server)
Task 15 [Running Containers]
Create a container named logserver with the image rhel8/rsyslog found from the registry registry.domain15.example.com:5000 The container should run as the root less user shangril a. use redhat as password [sudo user] Configure the container with systemd services as the shangrila user using the service name, "container-logserver" so that it can be persistent across reboot.
Use admin as the username and admin123 as the credentials for the image registry.
Answer:
Explanation:
* [root@workstation ~]# ssh shangrila@node1
[shangrila@node1 ~]$ podman login registry.domain15.example.com:5000
Username: admin
Password:
Login Succeeded!
[shangrila@node1 ~]$ podman pull registry.domain15.example.com:5000/rhel8/rsyslog
[shangrila@node1 ~]$ podman run -d --name logserver registry.domain15.example.com:5000/rhel8/rsyslog
021b26669f39cc42b8e94eab886ba8293d6247bf68e4b0d76db2874aef284d6d
[shangrila@node1 ~]$ mkdir -p ~/.config/systemd/user
[shangrila@node1 ~]$ cd ~/.config/systemd/user
* [shangrila@node1 user]$ podman generate systemd --name logserver --files --new
/home/shangrila/.config/systemd/user/container-logserver.service
[shangrila@node1 ~]$ systemctl --user daemon-reload
[shangrila@node1 user]$ systemctl --user enable --now container-logserver.service
[shangrila@node1 ~]$ podman ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
7d9f7a8a4d63 registry.domain15.example.com:5000/rhel8/rsyslog:latest /bin/rsyslog.sh 2 seconds ago logserver
[shangrila@node1 ~]$ sudo reboot
[shangrila@node1 ~]$ cd .config/systemd/user
[shangrila@node1 user]$ systemctl --user status
NEW QUESTION # 46
Create a volume group, and set 16M as a extends. And divided a volume group containing 50 extends on volume group lv, make it as ext4 file system, and mounted automatically under /mnt/data.
Answer:
Explanation:
# pvcreate /dev/sda7 /dev/sda8
# vgcreate -s 16M vg1 /dev/sda7 /dev/sda8
# lvcreate -l 50 -n lvm02
# mkfs.ext4 /dev/vg1/lvm02
# blkid /dev/vg1/lv1
# vim /etc/fstab
# mkdir -p /mnt/data
UUID=xxxxxxxx /mnt/data ext4 defaults 0 0
# vim /etc/fstab
# mount -a
# mount
(Verify)
NEW QUESTION # 47
Part 2 (on Node2 Server)
Task 2 [Installing and Updating Software Packages]
Configure your system to use this location as a default repository:
http://utility.domain15.example.com/BaseOS
http://utility.domain15.example.com/AppStream
Also configure your GPG key to use this location
http://utility.domain15.example.com/RPM-GPG-KEY-redhat-release
Answer:
Explanation:
[root@node1 ~]# vim /etc/yum.repos.d/redhat.repo
[BaseOS]
name=BaseOS
baseurl=http://utility.domain15.example.com/BaseOS
enabled=1
gpgcheck=1
gpgkey=http://utility.domain15.example.com/RPM-GPG-KEY-redhat-release
[AppStream]
name=AppStream
baseurl=http://utility.domain15.example.com/AppStream
enabled=1
gpgcheck=1
gpgkey=http://utility.domain15.example.com/RPM-GPG-KEY-redhat-release
[root@node1 ~]# yum clean all
[root@node1 ~]# yum repolist
repo id repo name
AppStream AppStream
BaseOS BaseOS
[root@node1 ~]# yum list all
NEW QUESTION # 48
......
RedHat EX200 certification exam is designed to validate the skills and knowledge of system administrators in the installation, configuration, and management of Red Hat Enterprise Linux (RHEL) systems. EX200 exam is essential for those who want to become a Red Hat Certified System Administrator (RHCSA). Passing the EX200 exam demonstrates that an individual has acquired the necessary knowledge and skills to effectively manage RHEL systems.
Pass RedHat EX200 Exam Quickly With CertkingdomPDF: https://www.certkingdompdf.com/EX200-latest-certkingdom-dumps.html
EX200 Dumps - The Sure Way To Pass Exam: https://drive.google.com/open?id=14sq_e1U-wDDkiT74kzYP2f1PM3RCSmuf