Ace NSE7_OTS-6.4 Certification with 37 Actual Questions
PASS Fortinet NSE7_OTS-6.4 EXAM WITH UPDATED DUMPS
The NSE7_OTS-6.4 exam covers a wide range of topics related to OT security, including network security, threat intelligence, risk management, incident response, and compliance. NSE7_OTS-6.4 exam is intended for IT professionals who are responsible for securing critical infrastructure and industrial control systems. Fortinet NSE 7 - OT Security 6.4 certification is ideal for security professionals, network administrators, and IT managers who want to enhance their skills and knowledge in OT security.
NEW QUESTION # 20
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)? (Choose three.)
- A. FortiSIEM
- B. FortiManager
- C. FortiGate
- D. FortiNAC
- E. FortiAnalyzer
Answer: A,C,D
Explanation:
1. FortiNAC - FortiNAC is a network access control solution that provides visibility and control over network devices. It can identify devices, enforce access policies, and automate threat response.
2. FortiSIEM - FortiSIEM is a security information and event management solution that can collect and analyze data from multiple sources, including network devices and servers. It can help identify potential security threats, as well as monitor compliance with security policies and regulations.
3. FortiAnalyzer - FortiAnalyzer is a central logging and reporting solution that collects and analyzes data from multiple sources, including FortiNAC and FortiSIEM. It can provide insights into network activity and help identify anomalies or security threats.
Reference:
Fortinet NSE 7 - OT Security 6.4 Study Guide, Chapter 4: OT Security Devices, page 4-20.
NEW QUESTION # 21
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
- A. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
- B. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
- C. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
- D. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
Answer: A
NEW QUESTION # 22
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?
- A. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
- B. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.
- C. Create a notification policy and define a script/remediation on FortiSIEM.
- D. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.
Answer: C
Explanation:
https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript
NEW QUESTION # 23
Refer to the exhibit.
Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)
- A. FortiSIEM for security incident and event management
- B. FortiGate for application control and IPS
- C. FortiNAC for network access control
- D. FortiEDR for endpoint detection
- E. FortiGate for SD-WAN
Answer: A,B,C
NEW QUESTION # 24
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)
- A. You cannot use Windows and Linux hosts security events with FortiSoC.
- B. You must set correct operator in event handler to trigger an event.
- C. You can automate SOC tasks through playbooks.
- D. Each playbook can include multiple triggers.
Answer: B,C
Explanation:
Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc
NEW QUESTION # 25
What can be assigned using network access control policies?
- A. Layer 3 polling intervals
- B. Logical networks
- C. FortiNAC device polling methods
- D. Profiling rules
Answer: B
NEW QUESTION # 26
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Under config user settings configure set auth-on-demand implicit.
- B. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- C. Enable two-factor authentication with FSSO.
- D. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
Answer: A
NEW QUESTION # 27
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use the user self-registration server.
- B. You must use a third-party RADIUS OTP server.
- C. You must register the same FortiToken on more than one FortiGate.
- D. You must use a FortiAuthenticator.
Answer: D
NEW QUESTION # 28
An OT network administrator is trying to implement active authentication.
Which two methods should the administrator use to achieve this? (Choose two.)
- A. Role-based authentication on FortiNAC
- B. Local authentication on FortiGate
- C. Two-factor authentication on FortiAuthenticator
- D. FSSO authentication on FortiGate
Answer: A,C
NEW QUESTION # 29
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for industrial intrusion detection and prevention.
- B. It can be used for network micro-segmentation.
- C. It can be used for IoT device detection.
- D. It can be used for device profiling.
Answer: B,D
NEW QUESTION # 30
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?
- A. FortiNAC determined the user by DHCP fingerprint method
- B. The user was determined by Security Fabric
- C. FortiGate determined the user by passive authentication
- D. Two-factor authentication is not configured with RADIUS authentication method
Answer: A
NEW QUESTION # 31
When you create a user or host profile, which three criteria can you use? (Choose three.)
- A. Host or user group memberships
- B. Host or user attributes
- C. An existing access control policy
- D. Location
- E. Administrative group membership
Answer: A,B,D
Explanation:
https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles
NEW QUESTION # 32
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?
- A. Create a notification policy and define a script/remediation on FortiSIEM.
- B. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.
- C. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
- D. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.
Answer: C
NEW QUESTION # 33
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiSIEM analytics report
- B. A FortiSIEM CMDB report
- C. A FortiAnalyzer device report
- D. A FortiSIEM incident report
Answer: B
NEW QUESTION # 34
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. IT and OT networks are separated by segmentation.
- B. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
- C. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
- D. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
Answer: A,D
NEW QUESTION # 35
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. IPS
- B. Security
- C. Risk
- D. List
- E. Overview
Answer: C,D,E
NEW QUESTION # 36
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Configure firewall policies with industrial protocol sensors
- B. Configure firewall policies with web filter to protect the different ICS networks.
- C. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- D. Use segmentation
- E. Deploy a FortiGate device within each ICS network.
Answer: A,B,C
NEW QUESTION # 37
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use the user self-registration server.
- B. You must use a third-party RADIUS OTP server.
- C. You must register the same FortiToken on more than one FortiGate.
- D. You must use a FortiAuthenticator.
Answer: D
NEW QUESTION # 38
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong hcache table for the report.
- B. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
- C. The administrator selected the wrong devices in the Devices section.
- D. The administrator selected the wrong time period for the report.
Answer: C,D
Explanation:
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/32cb817d-a307-11eb-b70b-00505692583a/FortiAnalyzer-7.0.0-Administration_Guide.pdf
NEW QUESTION # 39
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. All connected devices, each time they connect
- B. Rogue devices, each time they connect
- C. Known trusted devices, each time they change location
- D. Rogue devices, only when they connect for the first time
Answer: D
NEW QUESTION # 40
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?
- A. Link traps
- B. MAC notification traps
- C. End station traffic monitoring
- D. RADIUS
Answer: D
Explanation:
FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
Reference:
Fortinet NSE 7 - OT Security 6.4 Study Guide, Chapter 4: OT Security Devices, page 4-28.
NEW QUESTION # 41
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiGate
- B. FortiEDR
- C. FortiSwitch
- D. FortiNAC
Answer: A
Explanation:
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 42
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic? (Choose three.)
- A. Source defined as internet services in the firewall policy
- B. Lowest to highest policy ID number
- C. Highest to lowest priority defined in the firewall policy
- D. Services defined in the firewall policy.
- E. Destination defined as internet services in the firewall policy
Answer: C,D,E
Explanation:
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
1. Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
2. Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
3. Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.
Reference:
Fortinet NSE 7 - Enterprise Firewall 6.4 Study Guide, Chapter 4: Policy Implementation, page 4-18.
NEW QUESTION # 43
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiSIEM analytics report
- B. A FortiSIEM CMDB report
- C. A FortiAnalyzer device report
- D. A FortiSIEM incident report
Answer: B
NEW QUESTION # 44
......
To be eligible for the Fortinet NSE7_OTS-6.4 certification exam, candidates must have completed the Fortinet NSE 7 training program. The training program covers a wide range of topics related to OT security, including network architecture, threat detection and response, vulnerability assessment, and risk management. Fortinet NSE 7 - OT Security 6.4 certification exam includes both multiple-choice and practical questions, and candidates must demonstrate their ability to apply their knowledge in real-world scenarios.
Fortinet NSE7_OTS-6.4 (Fortinet NSE 7 - OT Security 6.4) Certification Exam is designed for professionals in the field of operational technology (OT) security. Fortinet NSE 7 - OT Security 6.4 certification aims to validate the candidate's knowledge and skills in securing OT networks and devices. NSE7_OTS-6.4 exam covers various topics, including OT security concepts, policies and procedures, risk assessment and management, and incident response.
NSE7_OTS-6.4 Questions PDF [2023] Use Valid New dump to Clear Exam: https://www.certkingdompdf.com/NSE7_OTS-6.4-latest-certkingdom-dumps.html