2023 Realistic CWAP-404 Dumps Exam Tips Test Pdf Exam Material
Powerful CWAP-404 PDF Dumps for CWAP-404 Questions
NEW QUESTION # 12
What is the difference between a Data frame and a QoS-Data frame?
- A. QoS Data frames include a DSCP control field
- B. QoS Data frames include a QoS control field
- C. QoS Data frames include an 802.1Q VLAN tag
- D. QoS Data frames include a QoS information element
Answer: B
Explanation:
Explanation
The difference between a Data frame and a QoS-Data frame is that QoS Data frames include a QoS control field. A Data frame is a type of data frame that is used to carry user data or upper layer protocol data between STAs and APs. A QoS Data frame is a type of data frame that is used to carry user data or upper layer protocol data between STAs and APs that support QoS (Quality of Service) features. QoS features allow different types of traffic to be prioritized and handled differently according to their QoS requirements, such as delay, jitter, throughput, etc. QoS Data frames include a QoS control field in their MAC header, which contains information such as traffic identifier (TID), queue size (TXOP), acknowledgment policy (ACK), etc., that are used for QoS purposes. The other options are not correct, as they do not describe the difference between Data and QoS Data frames. QoS Data frames do not include a DSCP (Differentiated Services Code Point) control field, which is part of the IP header in the network layer, not the MAC header in the data link layer. QoS Data frames do not include a QoS information element (IE), which is part of some management frames that indicate QoS capabilities or parameters, not data frames. QoS Data frames do not include an 802.1Q VLAN tag, which is part of some Ethernet frames that indicate VLAN membership or priority, not wireless frames. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 118-119
NEW QUESTION # 13
When a data frame is encrypted with WPA2, to which portion of the frame is the encryption applied?
- A. Frame body including the LLCPDU
- B. Frame body and MAC Header
- C. The whole MPDU
- D. Frame body excluding the LLCPDU
Answer: A
Explanation:
Explanation
When a data frame is encrypted with WPA2, the encryption is applied to the frame body including the LLCPDU. The LLCPDU (Logical Link Control Protocol Data Unit) is a part of the frame body that contains information such as protocol type, source and destination service access points (SAPs), and control fields. The LLCPDU is added by the LLC (Logical Link Control) sublayer to provide multiplexing and flow control functions for different upper layer protocols. When a data frame is encrypted with WPA2, which uses AES-CCMP as its encryption algorithm, both the payload and the LLCPDU are encrypted as a single unit. The MAC header and FCS are not encrypted, as they are needed for addressing and error detection purposes. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 115-116
NEW QUESTION # 14
What is used to respond with an uplink transmission to an MU-RTS trigger frame in the 802.11ax PHY?
- A. HE SU PPDU
- B. HE TB PPDU
- C. VHT PPDU
- D. HE MU PPDU
Answer: B
Explanation:
Explanation
An HE TB PPDU (High Efficiency Trigger-Based Packet Data Unit) is used to respond with an uplink transmission to an MU-RTS trigger frame in the 802.11ax PHY (Physical Layer). An MU-RTS trigger frame is a frame that initiates a multi-user transmission opportunity (MU-TXOP) by requesting multiple stations (STAs) to send clear-to-send (CTS) frames on different spatial streams or resource units (RUs). An HE TB PPDU is a frame that contains data from multiple STAs that have been allocated RUs by an MU-RTS trigger frame or another type of trigger frame. An HE SU PPDU (High Efficiency Single User Packet Data Unit) is a frame that contains data from a single STA using all available spatial streams or RUs. An HE MU PPDU (High Efficiency Multi User Packet Data Unit) is a frame that contains data from multiple STAs using different spatial streams or RUs without being triggered by another frame. A VHT PPDU (Very High Throughput Packet Data Unit) is a frame that uses the 802.11ac PHY and does not support multi-user transmissions.References:
CWAP-404 Study Guide, Chapter 3: 802.11 MAC Layer Frame Formats and Technologies, page 101 CWAP-404 Objectives, Section 3.4: Analyze multi-user transmissions CWAP-404 Study Guide, Chapter 3: 802.11 MAC Layer Frame Formats and Technologies, page 99
NEW QUESTION # 15
Which one of the following is required for Wi-Fi integration in laptop-based Spectrum Analyzer software in addition to the spectrum analysis adapter?
- A. SNMP read credentials to the WLAN controller or APs
- B. A directional antenna
- C. A firmware upgrade for the spectrum analysis adapter
- D. An 802.11 wireless adaptor
Answer: D
Explanation:
Explanation
An 802.11 wireless adaptor is required for Wi-Fi integration in laptop-based spectrum analyzer software in addition to the spectrum analysis adapter. The spectrum analysis adapter is a hardware device that captures the RF signals in the wireless environment and sends them to the spectrum analyzer software for analysis and display. The 802.11 wireless adapter is a hardware device that connects the laptop to the wireless network and allows the spectrum analyzer software to correlate the RF data with the Wi-Fi data, such as SSID, channel, and BSSID. This enables the spectrum analyzer software to provide more context and insight into the spectrum activity and its impact on the Wi-Fi network. A firmware upgrade for the spectrum analysis adapter is not required for Wi-Fi integration, but it may be needed to fix bugs or add features to the device. A directional antenna is an antenna that focuses the RF energy in a specific direction and has a high gain and a narrow beamwidth. A directional antenna can be used with a spectrum analysis adapter to pinpoint the location or source of interference or noise in the wireless environment, but it is not required for Wi-Fi integration. SNMP read credentials to the WLAN controller or APs are not required for Wi-Fi integration, but they may be useful for obtaining additional information about the wireless network configuration and performance from the network devices.References:
CWAP-404 Study Guide, Chapter 4: Spectrum Analysis and Troubleshooting, page 123 CWAP-404 Objectives, Section 4.2: Integrate Wi-Fi data with spectrum analysis data CWAP-404 Study Guide, Chapter 4: Spectrum Analysis and Troubleshooting, page 131
NEW QUESTION # 16
Which one of the following is not a valid acknowledgement frame?
- A. Block Ack
- B. CTS
- C. RTS
- D. Ack
Answer: C
Explanation:
Explanation
RTS is not a valid acknowledgement frame. RTS stands for Request To Send, and it is a control frame that is used to initiate an RTS/CTS exchange before sending a data frame. The purpose of an RTS/CTS exchange is to reserve the medium for a data transmission and avoid collisions with hidden nodes. An acknowledgement frame is a control frame that is used to confirm the successful reception of a data frame or a block of data frames. The valid acknowledgement frames are CTS (Clear To Send), Ack (Acknowledgement), and Block Ack (Block Acknowledgement) . References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 186; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 187; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 189; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 190.
NEW QUESTION # 17
When would you expect to see a Reassociation Request frame'
- A. Every time a STA associates to an AP to which it has previously been associated
- B. Every time a STA roams
- C. Only when a STA roams back to an AP it has previously been associated with
- D. Only when a STA is using FT roaming
Answer: B
Explanation:
Explanation
A Reassociation Request frame is sent every time a STA roams from one AP to another within the same ESS.
A Reassociation Request frame is similar to an Association Request frame, but it also contains the BSSID of the current AP that the STA is leaving. This allows the new AP to coordinate with the old AP and transfer the STA's context information, such as security keys, QoS parameters, and buffered frames. This way, the STA can maintain its connectivity and session continuity during roaming . References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 195;CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 196.
NEW QUESTION # 18
Given: The Frame Check Sequence (FCS) is a 32 CRC used for error detection.
The CRC is calculated over what?
- A. Mac Header and Frame Body only
- B. PHY Header, MAC Header and Frame Body
- C. PHY Header and Mac Header only
- D. Frame Body only
Answer: A
Explanation:
Explanation
The CRC is calculated over the MAC Header and Frame Body only. The CRC (Cyclic Redundancy Check) is a 32-bit value that is used for error detection in wireless transmissions. The CRC is calculated over the MAC Header and Frame Body of a PSDU, which are the parts of the data unit that contain information such as source and destination addresses, frame type, frame control, sequence number, payload, etc. The CRC is appended to the end of the PSDU as a FCS (Frame Check Sequence) field. The CRC is not calculated over the PHY Header or PHY Preamble, which are parts of the PPDU that contain information such as modulation, coding, data rate, etc. The PHY Header and PHY Preamble are added or removed by the PHY layer during the conversion between PSDU and PPDU. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 97-98
NEW QUESTION # 19
Finish the statement:
It is possible to distinguish between_______22 MHz transmissions and________20 MHz transmissions when looking at an FFT plot.
- A. HT and VHT
- B. HR/DSSS and ERP
- C. ERP and VHT
- D. OFDM and HT
Answer: D
Explanation:
Explanation
It is possible to distinguish between OFDM 20 MHz transmissions and HT 20 MHz transmissions when looking at an FFT plot. OFDM and HT are two different modulation schemes used by 802.11 WLANs. OFDM is used by legacy 802.11a/g devices, while HT is used by newer 802.11n/ac devices. OFDM and HT have different spectral characteristics that can be observed on an FFT plot. OFDM transmissions have a flat spectrum with sharp edges, while HT transmissions have a tapered spectrum with rounded edges. This is because HT uses guard intervals and cyclic prefixes to reduce inter-symbol interference and improve performance. The other options are not correct, as they do not describe different modulation schemes or channel widths that can be distinguished on an FFT plot. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 3: Spectrum Analysis, page 70-71
NEW QUESTION # 20
The PHY layer provides framing by adding a header to create what type of data unit?
- A. MPDU
- B. PSDU
- C. PPDU
- D. MSDU
Answer: C
Explanation:
Explanation
The PHY layer provides framing by adding a header to create a PPDU. A PPDU (PHY Protocol Data Unit) is the data unit that is transmitted or received over the wireless medium by the PHY layer. A PPDU consists of a PSDU (PHY Service Data Unit) and a PHY header, which contains information such as modulation, coding, and data rate. The PHY layer adds the PHY header to the PSDU to create a PPDU for transmission, or removes the PHY header from the PPDU to extract the PSDU for reception. The other options are not correct, as they are not created by adding a header at the PHY layer. An MPDU (MAC Protocol Data Unit) is created by adding a MAC header and FCS to an MSDU (MAC Service Data Unit) at the MAC layer. An MSDU is the data unit that is passed from the LLC sublayer to the MAC sublayer or vice versa. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 97-98
NEW QUESTION # 21
In the 2.4 GHZ band, what data rate are Probe Requests usually sent at from an unassociated STA?
- A. 6 Mbps
- B. 1 Mbps
- C. MCS 0
- D. The minimum basic rate
Answer: D
Explanation:
Explanation
In the 2.4 GHz band, probe requests are usually sent at the minimum basic rate from an unassociated STA. A probe request is a type of management frame that is transmitted by a STA to discover available BSSs in its vicinity. A probe request can be sent on one or more channels in either passive or active scanning mode. In passive scanning mode, a STA listens for beacon frames from APs on each channel. In active scanning mode, a STA sends probe requests on each channel and waits for probe responses from APs. A probe request is usually sent at the minimum basic rate, which is the lowest data rate among the supported rates that is required for all STAs to join and communicate with a BSS. The minimum basic rate can vary depending on the configuration of each BSS, but it is typically one of these values: 1 Mbps, 2 Mbps, 5.5 Mbps, or 11 Mbps in the 2.4 GHz band. The other options are not correct, as they do not reflect how probe requests are usually sent in the 2.4 GHz band. MCS 0 is a modulation and coding scheme used by 802.11n/ac devices in either band, but it is not a data rate per se. 6 Mbps is a data rate used by OFDM devices in either band, but it is not usually configured as a minimum basic rate in the 2.4 GHz band. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 123-124
NEW QUESTION # 22
What interframe space would be expected between a CIS and a Data frame?
- A. AIFS
- B. SIFS
- C. DIFS
- D. PIFS
Answer: B
Explanation:
Explanation
The interframe space that would be expected between a CTS (Clear to Send) and a Data frame is SIFS (Short Interframe Space). A SIFS is the shortest interframe space that is used for high-priority transmissions, such as ACKs (Acknowledgements), CTSs, or data frames that are part of a fragmentation or aggregation process. A SIFS is a fixed value that depends on the PHY type and channel width. A CTS and a Data frame are part of a virtual carrier sense mechanism called RTS/CTS (Request to Send/Clear to Send), which is used to avoid collisions and hidden node problems in wireless transmissions. When a STA (station) wants to send a data frame, it first sends an RTS frame to the intended receiver, indicating the duration of the transmission. The receiver then responds with a CTS frame, also indicating the duration of the transmission. The other STAs in the vicinity hear either the RTS or the CTS frame and update their NAV (Network Allocation Vector) timers accordingly, deferring their access to the medium until the transmission is over. The sender then sends the data frame after waiting for a SIFS, followed by an ACK frame from the receiver after another SIFS. The other options are not correct, as they are not used between a CTS and a Data frame. A PIFS (PCF Interframe Space) is used for medium access by the PCF (Point Coordination Function), which is an optional and rarely implemented polling-based mechanism that provides contention-free service for time-sensitive traffic. An AIFS (Arbitration Interframe Space) is used for medium access by different ACs (Access Categories), which are logical queues that correspond to different QoS (Quality of Service) levels for different types of traffic. An AIFS is a variable interframe space that depends on the AIFSN (Arbitration Interframe Space Number) value of each AC. A DIFS (Distributed Interframe Space) is used for medium access by the DCF (Distributed Coordination Function), which is the default and mandatory contention-based mechanism that provides best-effort service for normal traffic. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 6: 802.11 Frame Exchanges, page 166-167; Chapter 7: QoS Analysis, page 194-195
NEW QUESTION # 23
After examining a Beacon frame decode you see the SSID Element has a length of 0. What do you conclude about this frame?
- A. This is a common attack on WISP backend SQL databases
- B. The frame is corrupted
- C. The beacon is from a BSS configured to hide the SSID
- D. SSID elements always have a length of 0
Answer: C
Explanation:
Explanation
If the SSID element has a length of 0 in a Beacon frame decode, it means that the beacon is from a BSS configured to hide the SSID. The SSID element is a part of the Beacon frame that contains the name or identifier of the BSS. The SSID element has two fields: length and value. The length field indicates how many bytes are used for the value field, which contains the actual SSID string. If the length field is 0, it means that there is no value field or SSID string in the element. This is a common technique used by some APs to hide their SSID from passive scanning clients or potential attackers. However, this technique does not provide much security, as there are other ways to discover or reveal the hidden SSID, such as active scanning or capturing probe response or association frames. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 122-123
NEW QUESTION # 24
During a VHT Transmit Beamforming sounding exchange, the beamformee transmits a Compressed Beamforming frame to the beamformer. What is communicated within this Compressed Beamforming frame?
- A. Beamforming Matrix
- B. Feedback Matrix
- C. Beamformee Matrix
- D. Steering Matrix
Answer: B
Explanation:
Explanation
The beamformee transmits a Feedback Matrix within the Compressed Beamforming frame to the beamformer.
The Feedback Matrix contains information about the channel state between the beamformee and each spatial stream of the beamformer. This information is used by the beamformer to adjust its transmit weights and optimize its signal for the beamformee34. References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 11: 802.11n/ac/ax PHYsical Layer Frame Exchanges, page 4033; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 11: 802.11n/ac/ax PHYsical Layer Frame Exchanges, page 4064.
NEW QUESTION # 25
When performing protocol analysis, you notice a high number of RTS/CTS frames being transmitted on an HT network. You suspect this may be due to HT protection mechanisms. Where in the Beacon frame would you look to determine which one of the four HT protection modes the AP is operating in?
- A. HT Protection Element
- B. Non-HT Present Element
- C. HT Information Element
- D. HT Operation Element
Answer: C
Explanation:
Explanation
When performing protocol analysis, you would look at the HT Information Element in the Beacon frame to determine which one of the four HT protection modes the AP is operating in. The HT Information Element contains various subfields that provide information about the HT network configuration and operation. One of these subfields is the HT Protection field, which indicates whether any protection mechanisms are required for mixed-mode operation with non-HT STAs. The four possible values for this field are:
No Protection: No protection mechanisms are required.
Non-member Protection: RTS/CTS or CTS-to-self protection is required for all HT transmissions.
20 MHz Protection: RTS/CTS or CTS-to-self protection is required for all HT transmissions using a 40 MHz channel.
Non-HT Mixed Mode: All HT transmissions must use a non-HT preamble and header . References:
CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 11:
802.11n/ac/ax PHYsical Layer Frame Exchanges, page 378; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 11: 802.11n/ac/ax PHYsical Layer Frame Exchanges, page 379.
NEW QUESTION # 26
What should the To DS and From DS flags be to set to in an Association Response frame?
- A. To DS = 0, From DS = 1
- B. To DS = 1, From DS = 1
- C. To DS - 0, From DS = 0
- D. To DS - 1, From DS = 0
Answer: C
Explanation:
Explanation
The To DS and From DS flags should be set to 0 in an Association Response frame. An Association Response frame is a type of management frame that is transmitted by an AP to accept or reject an association request from a STA. The To DS (To Distribution System) and From DS (From Distribution System) flags are two bits in the Frame Control field of the MAC header that indicate whether a frame is destined for or originated from the DS (Distribution System), which is a system that connects multiple BSSs together. The To DS and From DS flags can have four possible combinations: 00, 01, 10, or 11. For an Association Response frame, which is sent from an AP to a STA within a BSS, both flags should be set to 0. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 121-122
NEW QUESTION # 27
What does the value of the Listen Interval field in an Association Request frame indicate?
- A. How long a STA waits for an Ack before retransmitting the frame
- B. How often a STA will go off channel to look for other BSSs
- C. How often a STA in power save mode wakes up to listen to Beacon frames
- D. How long a STA performing active scanning will listen for Probe Responses before changing channels
Answer: C
Explanation:
Explanation
The value of the Listen Interval field in an Association Request frame indicates how often a STA in power save mode wakes up to listen to Beacon frames. The Listen Interval is expressed in units of Beacon Intervals (typically 100 TU or 102.4 ms). For example, if the Listen Interval is set to 10, it means that the STA will wake up every 10 Beacon Intervals (or about 1 second) to check for buffered frames at the AP. The Listen Interval is used by the AP to determine how long it can hold frames for a STA in power save mode before discarding them . References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 197; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 198.
NEW QUESTION # 28
A client is operating in an unstable RF environment. Out of five data frames transmitted to the client it only receives four. The client sends a Block Ack to acknowledge the receipt of these four frames but due to frame corruption the Block Ack is not received by the AP. Which frames will be retransmitted'
- A. Both the corrupted data and Block Ack
- B. Only the data frame which was corrupted
- C. Only the Block Ack
- D. All data frames
Answer: D
Explanation:
Explanation
All data frames will be retransmitted in this scenario. This is because the AP uses a Block Ack (BA) mechanism to acknowledge the receipt of multiple data frames from a client in a single frame. The BA contains a bitmap that indicates which data frames were received correctly and which were not. If the BA is not received by the AP due to frame corruption, the AP will assume that none of the data frames were received by the client and will retransmit all of them. The other options are not correct, as they do not account for the loss of the BA or the use of the bitmap. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 6: 802.11 Frame Exchanges, page 167-168
NEW QUESTION # 29
What is encrypted within the third message of the 4-Way Handshake?
- A. PTK
- B. GMK
- C. GTK
- D. PMK
Answer: C
Explanation:
Explanation
The GTK (Group Temporal Key) is encrypted within the third message of the 4-Way Handshake. The 4-Way Handshake is a process that establishes a secure connection between a STA (station) and an AP (access point) using WPA2 (Wi-Fi Protected Access 2), which is a security protocol that uses AES-CCMP (Advanced Encryption Standard-Counter Mode CBC-MAC Protocol) as its encryption algorithm. The 4-Way Handshake consists of four messages that are exchanged between the STA and the AP. The first message is sent by the AP to the STA, containing the ANonce (Authenticator Nonce), which is a random number generated by the AP.
The second message is sent by the STA to the AP, containing the SNonce (Supplicant Nonce), which is a random number generated by the STA, and the MIC (Message Integrity Code), which is a value that verifies the integrity of the message. The third message is sent by the AP to the STA, containing the GTK, which is a key that is used to encrypt and decrypt multicast and broadcast data frames, and the MIC. The GTK is encrypted with the KEK (Key Encryption Key), which is derived from the PTK (Pairwise Temporal Key). The PTK is a key that is used to encrypt and decrypt unicast data frames, and it is derived from the PMK (Pairwise Master Key), the ANonce, and the SNonce. The fourth message is sent by the STA to the AP, containing only the MIC, to confirm the completion of the 4-Way Handshake. The other options are not correct, asthey are not encrypted within the third message of the 4-Way Handshake. The PMK is a key that is derived from a passphrase or obtained from an authentication server, and it is not transmitted in any message of the 4-Way Handshake. The PTK is a key that is derived from the PMK, the ANonce, and the SNonce, and it is not transmitted in any message of the 4-Way Handshake. The GMK (Group Master Key) is a key that is generated by the AP and used to derive the GTK, and it is not transmitted in any message of the 4-Way Handshake. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 8: Security Analysis, page 211-213
NEW QUESTION # 30
......
Guaranteed Accomplishment with Newest Nov-2023 FREE: https://www.certkingdompdf.com/CWAP-404-latest-certkingdom-dumps.html
Authentic CWAP-404 Dumps - Free PDF Questions to Pass: https://drive.google.com/open?id=19a4mkUxTauuYpT383M9IlunYDshWon12