[2022] JN0-1362 Answers JN0-1362 Free Demo Are Based On The Real Exam [Q32-Q52]

Share

[2022] JN0-1362 Answers JN0-1362 Free Demo Are Based On The Real Exam

JN0-1362 [Jan-2022 Newly Released] Exam Questions For You To Pass


Juniper JN0-1362 Exam Requirements

Juniper JN0-1362 exam dumps elaborates that this certification exam requires candidates to have previous level knowledge of IP networking before they can sit for the certification exam. The Juniper JN0-1362 Certification exam tests for the knowledge and understanding of the principles and concepts associated with IP-based networking. Update the latest knowledge in the areas of IPv4 and IPv6 networking, IPv4 and IPv6 transport, service, core security, Core routing, network management, MPLS-VPNs, BGP, BSCI, OSPF, CDP. The Juniper JN0-1362 certification exam in this section covers the understanding of basic network services associated with IP networking. This section of the exam tests your knowledge of DHCP, DNS, NTP, and email clients. Candidates taking the Juniper JN0-1362 test should have a thorough knowledge of TCP/IP services.

 

NEW QUESTION 32
What is the minimum number of nodes in a Junos Space Fabric design?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 33
You have a service provider customer that wants to offer services in a new market. They need to have a lower cost-of-entry broadcast network gateway.
Which product would satisfy this requirement?

  • A. uCPE with the appropriate licenses
  • B. vCPE with the appropriate licenses
  • C. vSRX with the appropriate licenses
  • D. vMX with the appropriate licenses

Answer: D

 

NEW QUESTION 34
Which management platform automates and simplifies the management of Juniper Networks switching, routing, and security products?

  • A. Junosphere
  • B. Junoscope
  • C. Juniper Secure Analytics
  • D. Junos Space

Answer: D

 

NEW QUESTION 35
Your customer wants to use NorthStar to communicate with network devices and acquire the MPLS topology.
Which protocol is recommended for this purpose?

  • A. ISIS
  • B. BGP-LS
  • C. OSPF
  • D. PIM-SSM

Answer: B

 

NEW QUESTION 36
What are two network management benefits of using devices in your design proposals?

  • A. Virtualization allows network administrators to dynamically add and remove services being provided
  • B. Virtualization can lower costs because there are fewer physical devices that need to be purchased and managed.
  • C. Virtualization can increase the available network bandwidth because their interface speeds are only limited by the host device.
  • D. Virtualization allows network administrators to dynamically make configuration changes to all network devices.

Answer: A,B

 

NEW QUESTION 37
Your applications are migrating from a legacy data center to an EVPN over a VXLAN-based VM environment. A few critical legacy applications not support this environment and must remain on bare metal servers and the applications must be able to access the Internet.
What must be included in the VXLAN design to satisfy these requirements?

  • A. VXLAN gateway
  • B. VTEP tunneling
  • C. nested VM capability
  • D. SR-IOV

Answer: A

Explanation:
https://www.juniper.net/documentation/en_US/release-independent/solutions/topics/concept/solutionevpn
-vxlan-understanding.html

 

NEW QUESTION 38
A customer reports that their RSVP LSP deployment faces scaling challenges as their network grows. You are asked to propose ways that the network can be optimized.
What are two ways that Paragon Pathfinder (formerly known as NorthStar) helps achieve this optimization? (Choose two.)

  • A. faster detection of LSP failure
  • B. creation of LSPs across different IGP areas
  • C. offloading control plane state to a central controller
  • D. reduction in LSPs due to optimal path selection

Answer: A,C

 

NEW QUESTION 39
You work for an organization providing hosting services for customer application VMs Traditional, your organization maintained isolation between customer workloads by assigning unique VLAN IDs to each customer network. Your organization is approaching the upper limit of 4094 VLANs available to uniquely identify customer networks You need to alleviate this limitation and provide more than 4094 unique network identifiers.
Which technology would satisfy these requirements?

  • A. VXLAN
  • B. MP-BGP
  • C. MPLS
  • D. EVPN

Answer: A

 

NEW QUESTION 40
Your company is a large ISP that is upgrading their routers As part of the upgrade project, they want to implement a solution that will improve the effectiveness of their current RTBH solution for handling spoofed IP addresses coming across the WAN.
Which action would satisfy their requirement?

  • A. Implement manual firewall policies
  • B. Implement MACsec.
  • C. Implement EVPN
  • D. Implement unicast RPF

Answer: C

 

NEW QUESTION 41
You are designing an MPLS-based network overlay for your environment that use either LDP or RSVP-signated LSPs.
Which two statements are true about these two signaling technologies (Choose two.) Which two statements are true about these two signaling technologies? (Choose two.)

  • A. RSVP enables an administrator to configure different traffic types to take different paths across the MPLS network.
  • B. LDP uses EROs to influence the path of an LSP and enable traffic engineering.
  • C. RSVP requires the traffic engineering database (TED) to find the best path across the network.
  • D. LDP leverages the IGP to find the best path across the network.

Answer: A,D

 

NEW QUESTION 42
As a service provider network architect, you are working with a potential customer who wants to replace their WAN, consisting of two data centers, one HQ, and 76 branch offices Due to application latency requirements between branch offices, the customer insists that all traffic must take the most optimal path through the service provider network. The customer intends to encrypt all traffic between customer routers at each location.
Which WAN technology would you propose in this scenario?

  • A. Internet as WAN
  • B. point-to-point Layer 2 VPNs
  • C. Layer 3 VPN
  • D. H-VPLS

Answer: A

 

NEW QUESTION 43
You are creating a WAN solution design for an enterprise customer. The customer will be connecting three sites in different locations. The customer wants all of the sites to be part of the same Layer 2 network.
In this scenario, what are two valid connection methods you would provide in your design? (Choose two.)

  • A. EVPN
  • B. leased line
  • C. IPsecVPN
  • D. NG-MVPN

Answer: A,C

 

NEW QUESTION 44
Which two network availability features require a router to have two Routing Engines installed? (Choose two.)

  • A. graceful restart
  • B. GRES
  • C. nonstop routing
  • D. JVRRP

Answer: C,D

 

NEW QUESTION 45
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?

  • A. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
  • B. Advertise the prefix to SP-B with an origin of unknown.
  • C. Advertise the prefix to SP-A with an origin of unknown.
  • D. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.

Answer: D

Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

 

NEW QUESTION 46
Your customer's enterprise is adding geographically-dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost but the branches must remain secure with low latency.
Which type of Internet access model satisfies the customer's requirement in this scenario?

  • A. centralized model with security at the hub
  • B. distributed model with security at each branch
  • C. distributed model with security at the hub
  • D. centralized model with security at each branch

Answer: B

 

NEW QUESTION 47
You are designing the physical redundancy for a service provider network and are checking for potential risks due to fate sharing.
Which two sources of fate sharing should you examine in this scenario? (Choose two.)

  • A. building location
  • B. hardware vendor
  • C. fiber conduit
  • D. MPLS LSP

Answer: A,D

 

NEW QUESTION 48
You are designing a solution for an energy trading organization that allows them to stream natural gas prices to trading partners. Prices will be streamed to trading partners using the Internet. Trading regulations require that any trading data streamed over a public network must be encrypted and authenticated.
Which connectivity solution meets these requirements?

  • A. IPsec
  • B. L2VPN
  • C. L3VPN
  • D. VPLS

Answer: A

 

NEW QUESTION 49
In your class-of-services design, you are using a multified classifier on your WAN edge devices to ensure that traffic is properly classified entering your network. You are asked to ensure that all packets traversing your core will be handled in the same manner without using firewall filters.
Given this scenario, which statement is correct?

  • A. You should use forwarding classes to property mark all DiffServ values because traffic is entering your core devices.
  • B. You should use a behavior aggregate (BA) classifier on all core devices to ensure incoming traffic is handled the same.
  • C. You should use rewrite rules to properly mark all DiffServ values because traffic is entering your core devices from your edge
  • D. You should use a scheduler on all core devices to property classify incoming traffic to ensure it is handled the same.

Answer: B

 

NEW QUESTION 50
You are working on a multi-Data Center interconnect (DCI) solution. Your WAN is based upon a multipoint MPLS Layer 3 VPN. This design must provide Layer 2 connectivity between the data centers across your WAN.
Which technology would satisfy the requirement?

  • A. VCF
  • B. EVPN
  • C. VRRP
  • D. RTG

Answer: B

 

NEW QUESTION 51
Your organization expenenced a man-in-the-middle attack and must protect against future attacks.
In this scenario, what must you do to protect your network?

  • A. Implement flowspec
  • B. Implement destination-based RTBH
  • C. Implement MACsec.
  • D. Implement EVPN

Answer: D

 

NEW QUESTION 52
......


What are the Exam Detail of Juniper JN0-1362 Exam

The Juniper JN0-1362 Certification exam consists of multiple sections that cover the following topics:

IPv4 and IPv6 networking, Transport, Service, Routing technology, MPLS VPNs, BGP, Border Gateway Protocol (BGP), OSPF/ISPF. In addition to this section, you will also get a section on core security. The core security section will cover the following topics: basic understanding of cryptography, IKEv2 implementing IPv4 transport, IPv6 transport, IPSec VPNs, policy configuration for security zones, and firewall filters. Juniper JN0-1362 exam dumps are available for all the sections of the Juniper JN0-1362 Certification exam. This section of the exam tests for the knowledge and understanding of the principles and concepts associated with IP-based networking in detail. The Juniper JN0-1362 Certification exam in this section considers in-depth knowledge of IP addressing, IP options, router's configurations, security challenges posed by IP, DHCP, NAT/PAT, routers' interfaces, and services. This section of the Juniper JN0-1362 exam tests your understanding of IKEv2 services implementation in a TCP/IP-based environment. The subject, matter associated with IKEv2 implementation is covered in detail in this section. The Juniper JN0-1362 Certification exam in this section tests your knowledge of IKEv2 configuration, IPSec connection, VPN connections between sites, and IKEv2 authentication.

In addition to these topics, you will also get a thorough understanding of VoIP systems, DNS/DHCP servers configuration, and connecting Windows domain networks to an IPv4 network. The Juniper JN0-1362 Certification exam in this section covers the understanding of TCP/UDP, ports and their functions, OSI layers, RTP/RTCP, protocol families, and OSI layer headers. Candidates preparing for the Juniper JN0-1362 Certification exam should be familiar with the physical transport mediums like copper wires, FDDI rings, or fiber optic cables. This section of the exam tests candidates' understanding of routing protocols that are used for IP-based networks. The Juniper JN0-1362 certification exam in this section covers RIPv2, OSPF, EIGRP, BGP, and their associated interfaces. Candidates should have a thorough understanding of single-area OSPF configuration options. Candidates are responsible to have a thorough knowledge of IETF on MPLS concepts for this exam section.

 

New 2022 Realistic Free Juniper JN0-1362 Exam Dump Questions and Answer: https://www.certkingdompdf.com/JN0-1362-latest-certkingdom-dumps.html