[2021] Use Valid New Free NCM-MCI-5.15 Exam Dumps & Answers
NCM-MCI-5.15 Braindumps PDF, Nutanix NCM-MCI-5.15 Exam Cram
NEW QUESTION 26
An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare for this task? (Choose two.)
- A. Reconfigure IPMI for the new datacenter
- B. Shut down all user VMs in the cluster
- C. Stop all Nutanix Files clusters
- D. Relocate the linked LDAP servers
Answer: B,C
Explanation:
Explanation
Ref: https://next.nutanix.com/installation-configuration-23/physical-relocation-of-nutanix-clusters-38403
NEW QUESTION 27
An administrator is deploying several new application VMs to a Nutanix cluster. The application is very transactional with a 28/72 random, read/write ratio.
What should the administrator do?
- A. Add a minimum of four virtual disks to each VM, and aggregate them on guest OS level.
- B. Add one large virtual disk to each VM. and use it for all application data.
- C. Add one large SSD to each node and enable Flash Mode for the VMs.
- D. Add a minimum of four SSDs to each node to ensure all writes go to the SSDs.
Answer: A
Explanation:
Explanation
Ref: https://next.nutanix.com/server-virtualization-27/iops-latency-issue-1168
NEW QUESTION 28
An administrator migrates a VM onto a new Nutanix cluster. After the migration, the administrator observes the following conditions:
* Cluster memory utilization: 64%
* Cluster CPU utilization: 19%
* Cluster storage utilization: 32%
* Average VM CPU utilization: 25%
* Average VM CPU ready%: 24%
* Average VM memory utilization: 60%
Which two changes should the administrator make to improve VM performance? (Choose two.)
- A. Add more memory to the VMs.
- B. Reduce the number of VMs on the hosts.
- C. Replace high core count CPUs with high clock rate CPUs. (also can be but is physical invas)
- D. Reduce the number of vCPUs assigned to VMs.
Answer: B,D
Explanation:
Explanation
ref http://www.joshodgers.com/tag/cpu-ready/
NEW QUESTION 29
An administrator needs to expand a cluster based on AHV and running on Nutanix G5 hardware with a new Nutanix G7 system. The cluster is running AOS 5.10 but the operation fails when expanding the cluster. AOS is running on the new system. There are no issues discovering the node.
Why is the operation failing?
- A. Foundation software has not been updated on the cluster.
- B. AOS version running on G7 is older than the version on the cluster.
- C. EVC needs to be configured before cluster expansion
- D. G7 hardware cannot be added to a G5 cluster.
Answer: B
Explanation:
Explanation
Ref: https://next.nutanix.com/installation-configuration-23/product-mixing-restrictions-37231
NEW QUESTION 30
An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the following considerations:
* Individual VMs will likely generate network throughputs in the range of 90-100Mbps
* Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time
* Individual VMs will communicate with only a few (one or two) remote hosts at a time
* Multicast will not be used in the environment
* The hosts are connected via two 1GbE network connections
How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?
- A. Configure bond0 as active-backup
- B. Configure bond0 as balance-lacp
- C. Configure bond0 as balance-tcp
- D. Configure bond0 as balance-sib
Answer: D
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2071-AHV-Networking:top_ahv_netw
NEW QUESTION 31
A Nutanix cluster is deployed with the following configuration:
* Three four-node blocks (A, B, and C)
* All Flash Redundancy Factor 2
What is the effect of simultaneous disk failures on two nodes located in block A?
- A. VMs are migrated off of the nodes with disk failures.
- B. Each node with a failed disk is marked as degraded.
- C. VM read and write operations continue normally.
- D. VMs on the nodes with failed disks are unable to write data
Answer: C
Explanation:
Explanation
Ref: https://next.nutanix.com/how-it-works-22/redundancy-factor-vs-replication-factor-37486
NEW QUESTION 32
An administrator is deploying Nutanix Files 3.5 and needs to configure the sizing of the FSVMs for an increased number of concurrent SMB connections over the default 750.
What should the administrator do?
- A. Complete the default installation change the CPU and RAM m Prism, and then log into the File Server dashboard and change the Filer Server Properties
- B. Deploy the Files VMs. power down the three FSVMs. change the CPU and RAM via Prism, and then power the three FSVMs back up
- C. During installation, input the correct number of connections in the File Server Installation screen and complete the installation
- D. During installation, click Customize on the File Server Installation screen, change the number of connections, and finish the installation
Answer: D
Explanation:
Explanation
Ref: https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-manage-c.html
NEW QUESTION 33
Refer to the exhibit.
An administrator creates a security policy that isolates their financial application from accessing the Internet When viewing the policy in Prism Central, several connections from the application are outbound to the Internet.
What is causing this issue with the policy?
- A. The policy has been left in monitor mode instead of enforcing mode.
- B. The 0.0.0.0 address was not specified in the outbound rule.
- C. The Activate box was not checked in the rule, so it is not enforcing.
- D. The blocked connections are illustrated for information only.
Answer: D
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-polic
NEW QUESTION 34
Refer to the exhibit.
What is the purpose of eth2 on the CVMs?
- A. iSCSI connectivity
- B. Network Segmentation
- C. Remote site connectivity
- D. RDMA Network Segmentation
Answer: B
Explanation:
Explanation
Ref: https://next.nutanix.com/installation-configuration-23/backplane-network-in-aos-5-5-27291
NEW QUESTION 35
A company needs to replicate their VMs to a remote site and must have an RPO of less than 1 hour.
When creating a protection domain, what should an administrator do to meet this requirement?
- A. Enable Entity Sync on the designated VMs
- B. Enable Near-Sync Replication with an RPO of 15 minutes
- C. Enable Availability Zones and send the VM to multiple targets
- D. Enable Async Replication with an RPO of 60 minutes
Answer: D
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:sto-pd-guidelines
NEW QUESTION 36
A customer has the following requirement for a Nutanix cluster:
* Must support high-performance Nutanix Volumes iSCSI workloads
* Must utilize AHV nodes
* Must use 10 GbE interface
How should the customer optimize networking?
- A. Enable Jumbo Frames on just the CVM
- B. Enable Jumbo Frame on just the Host
- C. Enable the use of Jumbo Frame on Host and CVM
- D. Convert Cluster to ESXi and enable Jumbo Frame on Host and CVM
Answer: B
NEW QUESTION 37
A system administrator needs to shut down an AHV node in a Nutanix cluster without causing service disruption. The administrator checks data resiliency and verifies that the cluster can tolerate a node down.
Which three steps should the administrator perform next? (Choose three.)
Answer:
Explanation:
Explanation
1 allow vms 2 sd CVM 3 sd node
NEW QUESTION 38
An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers. An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)
- A. On a CVM. run the command a Hash ntpq -pn.
- B. Restart genesis on all CVMs.
- C. Confirm that the NTP servers are reachable from the CVMs.
- D. Restart the chronos service on all CVMs.
Answer: A,C
Explanation:
Explanation
Ref: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA032000000bmjeCAA#Review_ntpq
NEW QUESTION 39
A VM is exhibiting one or more of the following baseline values based on the past 30 days:
* CPU usage < 20%
* CPU ready time < 5%
* Memory usage < 50% (moderately) or < 20% (severely)
* Memory swap rate = 0 Kbps
Which type of VM is being described?
- A. Bully VM
- B. Inactive VM
- C. Constrained VM
- D. Over-Provisioned VM
Answer: D
Explanation:
NEW QUESTION 40
An administrator needs to maximize storage potential in a six-node cluster. The container is configured with the following:
* Post-process compression
* Capacity deduplication
What should the administrator configure to increase space savings?
- A. Erasure coding
- B. Reserve capacity
- C. Cache dedupe
- D. Inline compression
Answer: A
NEW QUESTION 41
An administrator learns that some security settings in a cluster have been changed. The environment is out of compliance with required policies.
Which function should be used to revert any settings that have changed from the defaults and prevent further violations?
- A. Advanced Intrusion Detection Environment (AIDE)
- B. Security Configuration Management Automation (SCMA)
- C. Cluster Lockdown with strong password enforcement
- D. Defense Information Systems Agency STIG enforcement
Answer: B
Explanation:
Explanation
Ref: http://myvirtualcloud.net/nutanix-scma-the-security-feature-that-could-save-your-organization/
NEW QUESTION 42
An administrator is using Nutanix Move to migrate a Windows VM from ESXi to AHV. Automated guest preparation is failing with an error:
Account has UAC enabled error
The administrator is using the local built-in administrator account for the Windows VM Admin approval mode must remain enabled.
What should the administrator do to continue with the migration with Nutanix Move?
- A. Follow manual VM preparation guidelines
- B. Use a Domain Admin account for the Windows VM
- C. Reboot the Windows VM and try the migration again
- D. Place Windows VM in Maintenance Mode
Answer: B
Explanation:
Explanation
https://next.nutanix.com/move-application-migration-19/nutanix-xtract-validation-failed-user-must-belong-in-a-g
NEW QUESTION 43
Refer to the exhibit.
After performing ESXi to AHV conversion on a cluster, the alerts shown in the exhibit display on Prism.
What should the administrator do to resolve this issue efficiently?
- A. Create a new Protection Domain and add the VMs to rt.
- B. Delete the Protection Domain, create a new Protection Domain, and add the VMs to it
- C. Remove the VMs. create a new Protection Domain, and add VMs to it
- D. Remove VMs from the Protection Domain and add them back in.
Answer: D
NEW QUESTION 44
An administrator protected a DB VM running on a Nutanix cluster with NearSync Replication, which schedules to repeat every 15 minutes to a second site. The daily change rate is low. During nightly backups, the replication window is missed due to write volume.
Which two options describe the expected behavior? (Choose two.)
- A. NearSync stops working and fails over to the remote site.
- B. The system continuously tries to get to the NearSync schedule.
- C. Protection Domain transitions back to the hourly schedule.
- D. The Administrator needs to re-enable it manually.
Answer: A,B
NEW QUESTION 45
......
Nutanix NCM-MCI-5.15 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 11 |
|
Feel Nutanix NCM-MCI-5.15 Dumps PDF Will likely be The best Option: https://www.certkingdompdf.com/NCM-MCI-5.15-latest-certkingdom-dumps.html