100% Updated HP HPE0-V14 Enterprise PDF Dumps
Use Valid Exam HPE0-V14 by CertkingdomPDF Books For Free Website
HP HPE0-V14: Building HPE Hybrid IT Solutions Certified Professional salary
The average salary of an HP HPE0-V14: Building HPE Hybrid IT Solutions Certified Expert in:
- England - 46,632 POUND
- United State - 70,247 USD
- Europe - 45,347 EURO
- India - 8,42,327 INR
HP HPE0-V14: Building HPE Hybrid IT Solutions Certification Path
The HP HPE0-V14: Building HPE Hybrid IT Solutions Certification is one of the highest levels of certification mainly focusing on the Advanced Programming concepts.
If you pass your exam and meet all requirements for a credential, you will receive an e-mail from SAS within 72 business hours with instructions providing access to your certificate and logo through the SAS Certification Manager. You will also receive an email from Acclaim with access to your digital badge. For questions regarding access to either of these, please contact [email protected].
NEW QUESTION 59
A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)
Answer:
Explanation:
NEW QUESTION 60
Which network protocol is used to build a loop-free logical topology for Ethernet networks?
- A. STP
- B. SCSP
- C. ECP
- D. VLAN
Answer: A
NEW QUESTION 61
Refer to the exhibit.
The information shown is displayed for a Nimble array you are installing. The customer's administrator has asked you for the speed at which the Nimble ports are connecting to their SAN switches, and you have run the command shown to determine the number of gigabits per second used by this port connection.
What speed does the exhibit indicate is in use?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 62
A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
Support for Multi Chassis Link Aggregation in an active-active mode.
The control plane must not be a single point of failure.
Rapid Fail-over.
Unified Management.
They require a maximum of two switches per stack.
Which stacking technology meets the customer's requirements?
- A. Aruba Virtual Switching Extension (VSX)
- B. HPE Distributed Trunking
- C. HPE Intelligent Resilient Framework (IRF)
- D. Aruba Virtual Switching Framework (VSF)
Answer: A
NEW QUESTION 63
Which feature in a block storage array is effective in decreasing the size of blocks?
- A. thick provisioning
- B. deduplication
- C. thin provisioning
- D. compression
Answer: D
NEW QUESTION 64
Match the Networking Product Family to the appropriate use case:
Answer:
Explanation:
NEW QUESTION 65
Place the components on the left in the correct order on the right for the recommended power-up sequence.
Answer:
Explanation:
* SAN switches
* Tape libraries
* Disk storage
* Host servers
NEW QUESTION 66
Which hardware and software components make up a Nimble dHCI infrastructure?
- A. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and VMware
- B. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and Hyper-V
- C. Aruba Switches, HPE Synergy, HPE Nimble, and VMware
- D. Aruba Switches, HPE Synergy, HPE Nimble, and Hyper-V
Answer: A
Explanation:
Reference: https://community.hpe.com/t5/HPE-Storage-Tech-Insiders/HPE-Nimble-Storage-dHCI-Technical- Overview/ba-p/7054163#.XnxfMW5RWQ4
NEW QUESTION 67
Refer to the exhibit.
A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)
Answer:
Explanation:
Explanation
Answer 5710,10,535T
NEW QUESTION 68
Which protocol can be used to access a shared directory on a network-attached storage device?
- A. FCP
- B. SMB
- C. SNMP
- D. BGP
Answer: B
Explanation:
Reference: https://en.wikipedia.org/wiki/Network-attached_storage
NEW QUESTION 69
You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:
* Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit
* HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit
* Two SN3000B FC Switches
Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?
- A. HPE NinjaSTARS
- B. HPE OneView Advanced
- C. HPE SPOCK
- D. HPE One Configuration Advanced
Answer: C
NEW QUESTION 70
You are troubleshooting an HPE ProLiant rack-mount server. You need to run diagnostic tests on local storage.
Which HPE tool should you use?
- A. OneView
- B. iLO
- C. Intelligent Management Center
- D. Smart Storage Administrator
Answer: C
NEW QUESTION 71
Match the feature to the lowest iLO5 license in which it is available
Answer:
Explanation:
Last - last
3-2
1-1
3-3
NEW QUESTION 72
A customer has an ESXi server in a branch office They need to perform backups locally. The local backups must be replicated to the main data center with built-in deduplication What should the customer install at the branch office?
- A. StoreOnce VSA
- B. MSA 2042
- C. StoreOnce 3100
- D. Storevirtual VSA
Answer: D
NEW QUESTION 73
Refer to the exhibit.
You observed some high temperature alerts on a switch shown in the middle rack of the exhibit. The cooling in the data center is following best practices for the layout in the exhibit. The switch is an HPE 5945 series switch, and all the fans are operating normally. The switch is racked so that its ports face the rear of the rack. The administrator noticed the fan modules have red handles.
What should the administrator do to resolve the issue?
- A. Replace the fan modules with port-to-power fan modules.
- B. Add additional fan modules to the switch.
- C. Change the fan direction with the fan preferred direction command.
- D. Replace the fan modules with power-to-port fan modules.
Answer: C
NEW QUESTION 74
Refer to the exhibit.
A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.
Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?
- A. SSD Drives
- B. Secondary Riser Kit
- C. Smart Storage Hybrid Capacitor
- D. Workload Accelerator
Answer: B
NEW QUESTION 75
Which hardware and software components make up a Nimble dHCI infrastructure?
- A. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and VMware
- B. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and Hyper-V
- C. Aruba Switches, HPE Synergy, HPE Nimble, and VMware
- D. Aruba Switches, HPE Synergy, HPE Nimble, and Hyper-V
Answer: A
Explanation:
Explanation/Reference: https://community.hpe.com/t5/HPE-Storage-Tech-Insiders/HPE-Nimble-Storage-dHCI-Technical- Overview/ba-p/7054163#.XnxfMW5RWQ4
NEW QUESTION 76
A customer requires a MSA storage system that they use for archiving data. The system needs to provide a large amount of storage.
Which drive type meets the customer's needs?
- A. SATA nearline
- B. Read-intensive SSD
- C. Mixed-use SSD
- D. SAS midline
Answer: A
NEW QUESTION 77
......
For more info read reference:
Course Training HPE0-V14 Exam Outline
HP HPE0-V14 Official Cert Guide PDF: https://www.certkingdompdf.com/HPE0-V14-latest-certkingdom-dumps.html