Every question in the H3C Constructing Small - and Medium - Sized Enterprise Network bank is developed by professional experts who work with the GB0-191-ENU exam content continuously, and every answer is expert-verified. At CertkingdomPDF, quality is maintained as a routine, not claimed as a slogan.
H3C GB0-191-ENU Exam Overview:
| Certification Vendor: | H3C |
|---|---|
| Exam Name: | Constructing Small - and Medium - Sized Enterprise Network |
| Exam Number: | GB0-191-ENU |
| Passing Score: | 600/1000 |
| Exam Format: | True/False, Single-choice, Multiple-choice, Fill-in-the-blank |
| Available Languages: | Simplified Chinese, English |
| Real Exam Qty: | 50-52 |
| Exam Price: | USD 100-165 |
| Related Certifications: | H3C Certified Senior Engineer (H3CSE) H3C Certified Expert (H3CE) |
| Exam Duration: | 60 minutes |
| Certificate Validity Period: | 3 years |
| Recommended Training: | Constructing Small and Medium-Sized Enterprise Network V7.1 |
| Exam Registration: | H3C Official Certification Portal Pearson VUE Registration |
| Sample Questions: | ![]() |
| Exam Way: | Computer-based test at authorized H3C test centers and Pearson VUE |
| Pre Condition: | No formal prerequisite required; basic knowledge of computer networks recommended |
| Official Syllabus URL: | https://www.h3c.com/en/Support/Training_Certification/H3CNE/ |
H3C GB0-191-ENU Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| WAN and Interconnection | 10% | - VPN and basic WLAN concepts - Common WAN access technologies - Network fault diagnosis |
| Computer Network Fundamentals | 20% | - Common network interfaces and cables - OSI and TCP/IP models - TCP/IP protocol suite and subnetting |
| H3C Device Basics | 15% | - Command line interface and file system - Basic configuration and management - Remote access and system maintenance |
| LAN Switching Technologies | 20% | - VLAN trunking and link aggregation - Ethernet principles and VLAN - Spanning Tree Protocol |
| IP Routing Technologies | 20% | - RIP protocol fundamentals and configuration - Introduction to OSPF basics - Static routing and default route |
| Network Services and Security | 15% | - Port security and device hardening - ACL and NAT configuration - DHCP and DNS services |
GB0-191-ENU Exam Details and Study Questions
The GB0-191-ENU exam contains 50-52 questions with 60 minutes minutes to complete them. A clear knowledge structure is what makes that volume manageable — you answer faster when every topic has its place.
Passing the GB0-191-ENU exam requires 600/1000, and registration costs USD 100-165. Structured preparation is how you spend study time once and exam fees once.
Immediately. The system emails you at once with the download link for the H3C Constructing Small - and Medium - Sized Enterprise Network materials — the whole delivery process takes about a minute. Open the email, download the GB0-191-ENU exam product to your computer, install it, and you are studying within minutes of deciding to. If the message does not appear, check your spam folder; after 2 hours without delivery, contact support. Install on all of your own devices without limit.
No formal prerequisite required; basic knowledge of computer networks recommended
The GB0-191-ENU exam is the official assessment behind the H3C Constructing Small - and Medium - Sized Enterprise Network certification from H3C. Lifelong learning has become the norm precisely because industries keep moving — and this credential is a concrete way to keep pace. Many candidates only sit it seriously on a second attempt; structured preparation is how you make the first one count.
H3C recommends these training resources for candidates:
Official training adds depth; a clearly structured practice bank with verified answers adds direction. Together they cover both sides of preparation.
The official outline divides the GB0-191-ENU exam into weighted domains, including:
- Computer Network Fundamentals (20%)
- H3C Device Basics (15%)
- LAN Switching Technologies (20%)
The H3C Constructing Small - and Medium - Sized Enterprise Network bank at CertkingdomPDF mirrors this structure, so the knowledge map you build while practicing matches the one the exam uses.
Registration for the GB0-191-ENU exam runs through these official channels:
It is never too late to start — but starting today beats starting after one more week of hesitation.
Structure is the design principle. The H3C Constructing Small - and Medium - Sized Enterprise Network materials first build a clear knowledge structure of the GB0-191-ENU exam, so difficult points become understandable in sequence rather than intimidating in isolation. Our experts have prioritized the most important knowledge for busy learners, and every answer is expert-verified — so your limited hours go exactly where the objectives point.
H3C Constructing Small - and Medium - Sized Enterprise Network Sample Questions:
The MSR router exchanges routing information with the outside world through RIPv2. There are three routes 10.1.1.0/24, 10.1.2.0/24, 10.1.3.0/24 in the routing table, then the following RIP configuration is added to the router:
[MSR-rip-1] summary
Then the router will send out the route of which network segment as follows?
- A. 10.0.0.0/8
- B. 10.1.0.0/22
- C. 10.1.0.0/16
- D. 10.1.2.0/22
Correct Answer: A 🗳️
The main link of the WAN of a company's MSR router is a synchronous and asynchronous serial port, which is connected to the operator's network through a V.35 cable; the router also uses an ISDN BRI interface as a backup link.
Regarding the line bandwidth, which of the following statements are correct? (multiple choice)
- A. The bandwidth of the backup line may be 144Kbps
- B. The bandwidth of the backup line may be 128Kbps
- C. The bandwidth of the main link may be 1Mbps
- D. The bandwidth of the backup line may be 64Kbps
Correct Answer: B,C,D 🗳️
The correct statement about the STP protocol is ______. (Multiple choice)
- A. The default priority value of the H3C Ethernet switch is 32768
- B. The BridgeID value is a combination of the priority of the bridge and the MAC address of the bridge. The front is the priority, and the back is the MAC address.
- C. The one with the higher BridgeID value will be selected as the root bridge
- D. When the priority is the same, the smaller the MAC address, the higher the priority
- E. The smaller the priority value, the lower the priority
Correct Answer: A,B,D 🗳️
A network connection is shown in the figure.
All interfaces of the four routers are configured with OSPF, and they are all running in OSPF area 23. All network segments can be connected to each other.
The OSPF Cost of the interconnection links between routers is shown in the figure. Then the correct description below is ______. (Multiple choice)
- A. RTC will have two OSPF neighbors
- B. RTD has the same LSDB as RTA
- C. After SPF calculation, the cost value of the path from RTC to 192.168.4.0/24 and to 192.168.2.0/24 is the same, so an equal-cost route will be formed on RTC
- D. RTC calculates the best path to the 192.168.2.0/24 network segment according to the SPF algorithm as C->A->B
Correct Answer: B,D 🗳️
An MSR router is connected to the Internet through the S1/0 interface, and the GE0/0 interface is connected to the LAN host. The network segment of the LAN host is 10.0.0.0/8, and there is an FTP server with an IP address of 202.102.2.1 on the Internet.
By configuring the IP address and routing on the router, the hosts in the current LAN can access the Internet normally (including the public network FTP server). Now the following configuration is added to the router:
firewall enable
acl number 3000
rule 0 deny tcp source 10.1.1.1 0 source-port eq ftp destination 202.102.2.1 0
Then apply this ACL to the inbound and outbound directions of the GE0/0 interface, then which of the following intentions can this ACL achieve?
- A. Only prohibit the FTP control connection from the host whose source address is 10.1.1.1 to the destination host's 202.102.2.1 whose port is TCP 21
- B. The host whose source address is 10.1.1.1 is prohibited from initiating FTP connection to the destination host 202.102.2.1
- C. There is no restriction on the FTP connection initiated from 10.1.1.1 to 202.102.2.1
- D. Only prohibit the FTP data connection from the host whose source address is 10.1.1.1 to the destination host 202.102.2.1 whose port is TCP 20
Correct Answer: C 🗳️
Viewing page 1 out of 87 pages.
Viewing questions 1-5 out of 434 questions.





